Thoughts on Cab Repair Videos - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ol Curt · 01-02-2009, 11:44 PM

I just finished renting and viewing the videos on cab repair that are offered. I couldn't help but notice the guy didn't brace anything for a repair of inner\outer rockers, floor pan, cab supports and cab corners. Doesn't that seem odd?

joe231 · 01-02-2009, 11:58 PM

where did you rent them?
i have heard bracing isn't necessary.......

ol Curt · 01-03-2009, 12:09 AM

I rented them from smartflix.

http://smartflix.com/

TimE · 01-03-2009, 12:16 AM

That's a cool link. Might have to check some of those out.

As for not bracing...who knows. I plan on bracing mine just to be sure it stays square. I would rather put in a few braces beforehand than have to try to re-square the cab.

ol Curt · 01-03-2009, 12:22 AM

I think I'm with you on that. If i am going to take the seat and fuel tank out, why not put a couple of braces in?

Alan's Classic · 01-03-2009, 12:45 AM

Bracing is cheap insurance. You never know when you might need it.

joe231 · 01-03-2009, 12:53 AM

cool site!
did you rent the fabman ones on the 67-72 trucks?

ol Curt · 01-03-2009, 02:15 PM

"cool site!
did you rent the fabman ones on the 67-72 trucks? "

Yes, exactly! A lot better than buying them for $100

66truckin · 01-03-2009, 02:48 PM

I have no experience with 60-66 chevy trucks but I have replaced rockers/cab corners/ floors on many many 73-87 trucks and as long as you do them 1 at a time there is no need for bracing. Jeremy

01-02-2009, 11:44 PM	#1
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Thoughts on Cab Repair Videos I just finished renting and viewing the videos on cab repair that are offered. I couldn't help but notice the guy didn't brace anything for a repair of inner\outer rockers, floor pan, cab supports and cab corners. Doesn't that seem odd?

01-02-2009, 11:58 PM	#2
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Thoughts on Cab Repair Videos where did you rent them? i have heard bracing isn't necessary....... __________________ *CHEVY ONLY*

01-03-2009, 12:09 AM	#3
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Thoughts on Cab Repair Videos I rented them from smartflix. http://smartflix.com/

01-03-2009, 12:16 AM	#4
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: Thoughts on Cab Repair Videos That's a cool link. Might have to check some of those out. As for not bracing...who knows. I plan on bracing mine just to be sure it stays square. I would rather put in a few braces beforehand than have to try to re-square the cab.

01-03-2009, 12:22 AM	#5
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Thoughts on Cab Repair Videos I think I'm with you on that. If i am going to take the seat and fuel tank out, why not put a couple of braces in?

01-03-2009, 12:45 AM	#6
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Thoughts on Cab Repair Videos Bracing is cheap insurance. You never know when you might need it. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

01-03-2009, 12:53 AM	#7
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Thoughts on Cab Repair Videos cool site! did you rent the fabman ones on the 67-72 trucks? __________________ *CHEVY ONLY*

01-03-2009, 02:15 PM	#8
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: Thoughts on Cab Repair Videos "cool site! did you rent the fabman ones on the 67-72 trucks? " Yes, exactly! A lot better than buying them for $100

01-03-2009, 02:48 PM	#9
66truckin Registered User Join Date: Jan 2009 Location: Springfield, IL Posts: 185	Re: Thoughts on Cab Repair Videos I have no experience with 60-66 chevy trucks but I have replaced rockers/cab corners/ floors on many many 73-87 trucks and as long as you do them 1 at a time there is no need for bracing. Jeremy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.