WANTED-SOURCE FOR 87 8FT BEDS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

John H · 08-31-2001, 04:08 PM

Anyone know dealers of new or excellent rust free 87 8 ft truck beds? Does any company build them? Why not?

ItsNotABlazer · 09-01-2001, 09:27 AM

You might check out www.73-87ChevyTrucks.com

If I remember right they had those bedsides on sale both long and short bedsides.

ItsNotABlazer · 09-01-2001, 09:32 AM

DOHHHHH!!!! $339 for a bedside but I think a few weeks ago they were under $200. Oh well its all about timing :lol

**crossy** · 09-01-2001, 10:03 PM

john, i see you are in Mass. right ? I'm sure non rusted ones are pretty hard to find there.The only thing I could suggest is Fall Carlisle,Pa. coming at end of Sept. There is a guy who brings them up from down south to his Maryland body shop and sells them there .but he gets $ 800+ now for a clean one .If you happen to need a cab also I have an entire 83 VERY SOLID truck and 8' bed here in southern ,N.J. that i would let you have for $850 with 2 decent doors all i want off is the rallys.I have been debateing to fix this truck but if i get what i want I would let it go as is for that .it also has a good tailgate with trim panel and tilt column.4 headlight front clip is Perfect also.If you know what GM sheetmetal is selling for now than you could probably make all your money back 'up there' selling off the rust free parts .The bed has a few battle scars but no rust at all anywhere and the cab corners only have a quarter sized hole with nothing at all underneath. motor/trans is shot. If you are not interested in that then i could get you the number of the guy in Maryland. I'm at all4trux@snip.net or
856-678-7883 B4 9pm est. DAVE

[This message has been edited by crossy (edited 09-01-2001).]

[This message has been edited by crossy (edited 09-02-2001).]

08-31-2001, 04:08 PM	#1
John H Registered User Join Date: Aug 2001 Location: Chelmsford,MA. USA Posts: 2	WANTED-SOURCE FOR 87 8FT BEDS Anyone know dealers of new or excellent rust free 87 8 ft truck beds? Does any company build them? Why not?

09-01-2001, 09:27 AM	#2
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	You might check out www.73-87ChevyTrucks.com If I remember right they had those bedsides on sale both long and short bedsides. __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

09-01-2001, 09:32 AM	#3
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	DOHHHHH!!!! $339 for a bedside but I think a few weeks ago they were under $200. Oh well its all about timing :lol __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

09-01-2001, 10:03 PM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	john, i see you are in Mass. right ? I'm sure non rusted ones are pretty hard to find there.The only thing I could suggest is Fall Carlisle,Pa. coming at end of Sept. There is a guy who brings them up from down south to his Maryland body shop and sells them there .but he gets $ 800+ now for a clean one .If you happen to need a cab also I have an entire 83 VERY SOLID truck and 8' bed here in southern ,N.J. that i would let you have for $850 with 2 decent doors all i want off is the rallys.I have been debateing to fix this truck but if i get what i want I would let it go as is for that .it also has a good tailgate with trim panel and tilt column.4 headlight front clip is Perfect also.If you know what GM sheetmetal is selling for now than you could probably make all your money back 'up there' selling off the rust free parts .The bed has a few battle scars but no rust at all anywhere and the cab corners only have a quarter sized hole with nothing at all underneath. motor/trans is shot. If you are not interested in that then i could get you the number of the guy in Maryland. I'm at all4trux@snip.net or 856-678-7883 B4 9pm est. DAVE [This message has been edited by crossy (edited 09-01-2001).] [This message has been edited by crossy (edited 09-02-2001).] __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.