Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-22-2002, 09:01 PM | #1 |
Registered User
Join Date: Jan 2002
Location: usa
Posts: 3
|
where to find A/C for 81 c10
have a 81 c10 with stock heater, where can i find some A/C for it. Prefer it to be somewhat stock and not after market add on.
Any help will be greatly appreciated Thank you |
01-23-2002, 12:27 AM | #2 |
Oh,you can't buy that new
Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
first off be careful with an 81 as they have many parts from 73-80 style. I believe i can help you with almost everything that bolts to the engine.including pulleys and a condensor. I just sold the only interior/firewall set up i had. email me privately at all4trux@snip.net .DAVE
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. |
01-23-2002, 01:15 PM | #3 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
ya shoulda said something a few days sooner, i trashed the a/c on the 85 burb- busted up the boxes to get the heater core oput for copper $$ , boxes and everything else would have worked for ya,...... it always happens like this every time...
i even trashed a 90% rustfree 76 a/c silverado cab that had also had the a/c compressor and brackets on engine and all still .. and also another 76 a few months ago at about the same time that was an a/c truck all complete too. every 73-87 i ever find is always a/c, tilt cruise p/s, p/b, loaded, all except an 81 i had until last spring. Cabs are normally rotted off the frame rails though- so are junk trucks, but were driveable, but scary to do so with no one wants this stuff til its gone... im pretty sure you have to midify the firewall on 73-up to add a/c to them also. not same cabs, i never pay attention to firewall i just scrap em. good luck ------------------ Fleet as of today: A 68 C-10 panel, a 68 dually C-30 dump truck, '71 C10 project, 72 4x4 blazer frame for sale cheap, 79 G20 van daily driver, parts/scrap 85 C20 burb, parts/scrap 79 Limousine De Ville, etc. Randy- Lincoln, IL r68c30@hotmail.com [This message has been edited by Fast68Chevy (edited 01-23-2002).] |
01-23-2002, 08:41 PM | #4 |
Registered User
Join Date: Jan 2002
Location: usa
Posts: 3
|
thanks guys, i just finished re wiring the entire truck with a Painless kit. It was fairly easy but time consuming. all i have left is rebuild doors, dash(A/C included) and interior.
Would Junk Yards be helpfull or should i try the after market route, For ac and other parts? Or is there any good sites that would have parts, i like the chevy duty but they are pretty limited. |
01-24-2002, 08:44 AM | #5 |
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
oldman,
Get catalogues from www.jcwhitney.com www.yearone.com www.cheyennepickup.com www.lmctruck.com. Cheyennepickup and LMC trucks have the better catalogues. They have detail pictures off the stuff you need for the A/C. Brackets are resonable but a boneyard will probably better except for the compressor, condensor and accumalator. If you have to buy hoses don't get any from the boneyard. The hose rot from the inside. Have a new set made a local A/C place. The new hoses today use a plastic barrier between the outter and inner portions. This barrier helps keep the freon in your system. New hoses for my '83 cost <$100. Try www.ebaymotors.com. ------------------ Gerardo 1983 Custom Truck TX Plates: "BAD BOW" http://www.geocities.com/abetterchemist/ |
01-24-2002, 05:04 PM | #6 |
Registered User
Join Date: Jan 2002
Location: usa
Posts: 3
|
Thanks again
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|