Help with oil pan removal............. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

eightbanger · 03-11-2009, 06:48 PM

Quote:

Originally Posted by Green Machine

Looks like a plastic sleeve from the oil pump shaft, some teeth from plastic coated timing gear and some remains of a push rod. Tap the pickup screen on the pump, bet you will find some more stuff in there.

Thats where one of those metal pieces was, must be quite a suction on those pickups.

Quote:

Originally Posted by LockDoc

I can Just about guarantee it's from an earlier problem or your motor wouldn't be running at all...

Glad to see you got it disassembled.

LockDoc

Thanks Leon, it's been a learning curve....but I would'nt be able to tackle any of these things if I didn't have the help of this board.

**americanmusc1e** · 03-13-2009, 11:58 AM

WOW!!! i've never seen that much stuff in the bottom of a pan before. GOOD LUCK i hope its nothing serious

03-13-2009, 11:58 AM	#27
americanmusc1e Senior Member Join Date: Jan 2009 Location: Austin, TX Posts: 1,079	Re: Help with oil pan removal............. WOW!!! i've never seen that much stuff in the bottom of a pan before. GOOD LUCK i hope its nothing serious __________________ -- Josh Instagram: @americanmusc1e OLD SKOOL-- 1970 C10. 454/Th400/3.07 posi Build Thread FARM TRUCK----1949 Chevrolet 3800 Power Wagon Hauler Build Thread 1999 4wd OBS Tahoe - daily. DM me if you can't see photos i posted

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.