|
05-09-2009, 09:09 PM
|
#1 |
|
Registered User
Join Date: Aug 2007
Location: los angeles california
Posts: 2
|
1973 blazer sits
I have a 73 chevy blazer and seats from 2006 chevy silverado dual cab, can I put them In the blazer? I'm pretty sure the two bucket seats will not be a problem but I am concerned bout the bench, what do you think can I do it?
|
|
|
|
05-10-2009, 12:48 AM
|
#2 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: 1973 blazer sits
Welcome to the board from Texas
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop  Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
05-10-2009, 02:20 AM
|
#3 |
|
Step Brother
Join Date: Sep 2007
Location: K-town
Posts: 4,029
|
Re: 1973 blazer sits
I will move this to the place were you will get more responses.....Welcome to the site....
|
|
|
|
|
05-10-2009, 12:32 PM
|
#4 |
|
Low & Fast!
Join Date: Jan 2007
Location: Knoxville, TN
Posts: 3,110
|
Re: 1973 blazer sits
First thing Welcome to the site!!
 And yes they will work, you will need to drill some new holes, but I think you can use 2 of the stock hole on each side. You will need to weld a small plate on the back side of the floor or put nuts on you bolts. Post some pics when you get time.. Trav
__________________
|
|
|
|
|
05-10-2009, 09:24 PM
|
#5 |
|
Registered User
Join Date: Nov 2007
Location: Lincoln NE
Posts: 513
|
Re: 1973 blazer sits
the center seat will be a tight fit if you use the stock mounting locations on the front of the seats but it can be done with a little tweaking. as stated before you will need to drill holes for the rear mounting
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
