Project Vitamin C-10 - Page 52 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 06-04-2009, 10:08 PM

Some times the cheap crap won't last long. It will cost you more in the end.

70 Suburban · 06-04-2009, 10:41 PM

True... I got them realy cheap from s&w. I think i paied 25 a box for them. They dont last as long but for the price at the time....sweet

Alan's Classic · 06-04-2009, 11:26 PM

Quote:

Originally Posted by 70 Suburban

I used to do it that way alan but it seams to cost alot... I went to an off label brand for my roloc and small disks. But the do the best job and more control

I have used some cheap stuff over the years and find myself using 3M again.

Quote:

Originally Posted by Strodder

Some times the cheap crap won't last long. It will cost you more in the end.

Got a master cylinder today. So far it looks like it will work fine.

Also ground the welds down on the hood. I still need to touch up a few areas. So far I have about 3 hrs in it.

70 Suburban · 06-04-2009, 11:38 PM

looking great.

Alan's Classic · 06-04-2009, 11:40 PM

I've used WIW thread without much luck so I will post my question here. I need to know WIW on the steering wheel and ring. The wheel has some stress cracks. And pitting on the chrome. Thanks

4dranch · 06-04-2009, 11:40 PM

nice work on the m/c Alan....Tony should know on the WIW for the steering wheel and chrome horn ring..
a new reproduction wheel goes for around $150 to $200 I beleive. so mayby,, and I'm guessing
with the horn ring around $75 to $100???

joe231 · 06-04-2009, 11:44 PM

I would guess @ $50 for the wheel...but I'm a cheap ass

70 Suburban · 06-05-2009, 01:04 AM

HMM GOOD QUESTION.. i HAVE ONE OF THESE LAYIN IN THE SHED FLOOR

joe231 · 06-05-2009, 08:19 AM

Quote:

Originally Posted by 70 Suburban

HMM GOOD QUESTION.. i HAVE ONE OF THESE LAYIN IN THE SHED FLOOR

there is that little I again.

70 Suburban · 06-05-2009, 09:13 AM

lol yeah I get annoyed by it to. but they wont let me use small caps at work so I get into that habit

Alan's Classic · 06-05-2009, 10:45 PM

Quote:

Originally Posted by 4dranch

nice work on the m/c Alan....Tony should know on the WIW for the steering wheel and chrome horn ring..
a new reproduction wheel goes for around $150 to $200 I beleive. so mayby,, and I'm guessing
with the horn ring around $75 to $100???

Quote:

Originally Posted by joe231

I would guess @ $50 for the wheel...but I'm a cheap ass

I guess I can go in the middle and list it for $75 + shipping thanks for the reply.

Anybody in the area going to Super Chevy Saturday June 6 in Commerce GA?

Welded a few pinholes and ground smooth. It looks better and think it will be fine. Spent another half an hour on it tonight. Which brings the total labor up to 3.5 hrs

daverod · 06-05-2009, 10:55 PM

$350 not bad for a nights work. Looks nice. Now I'm going to go do mine. I'm thinking I have about 10hrs in mine and it looks like $hit. Another 10 and it will be fine.

jgh64pkup · 06-05-2009, 10:55 PM

looks good

Alan's Classic · 06-05-2009, 11:50 PM

Quote:

Originally Posted by daverod

$350 not bad for a nights work. Looks nice. Now I'm going to go do mine. I'm thinking I have about 10hrs in mine and it looks like $hit. Another 10 and it will be fine.

I wish I made $100/hr.

Quote:

Originally Posted by jgh64pkup

looks good

Strodder · 06-06-2009, 09:43 AM

Quote:

Originally Posted by Alan's Classic

I wish I made $100/hr.

Keep wishing Allan.

The hood looks really good. Looks like you you didn't warp it. Nice job.

Alan's Classic · 06-06-2009, 08:42 PM

Quote:

Originally Posted by Strodder

Keep wishing Allan.

The hood looks really good. Looks like you you didn't warp it. Nice job.

I hear ya brother, and thanks .

Got back from the Super Chevy Show. sdailey went with me and we had a blast. We got to meet Down South Truckin and Tim Christian there. We didn't get to spend much time with Down South, but hung out quit a bit with Tim off and on through out the day. He is really a stand up guy. He might not be the cheapest, but I think his customer service is outstanding. We stopped at Year One on the way there and saw the Bandit rendition. it was roped off so I couldn't get too close.

The 409 exibition was awesome. I could have swore the left rear tire came off of the ground when he launched.

This truck was really cool

More pics coming

Alan's Classic · 06-06-2009, 08:45 PM

more pics, I'll be posting some pics of the goodies I got today later tonight.

daverod · 06-06-2009, 09:06 PM

Why doesn't that black truck have a brake booster?

Alan's Classic · 06-06-2009, 09:09 PM

Quote:

Originally Posted by daverod

Why doesn't that black truck have a brake booster?

It's mounted on the frame rail under the floor like the 55's used to be. Cleans it up doesn't it?

hAetWagon · 06-06-2009, 09:19 PM

Quote:

Originally Posted by Alan's Classic

It's mounted on the frame rail under the floor like the 55's used to be. Cleans it up doesn't it?

I'd love to see a pic of that.

daverod · 06-06-2009, 09:25 PM

They all look good. I like the lip on the rims too. Can't wait for the Boise car show.

TimE · 06-06-2009, 10:06 PM

From looking at the pics, it appears that you have a big block infatuation.

70 Suburban · 06-06-2009, 10:18 PM

I hooked up power braked on a 30 with frame mounted power booster. As long as you have the pedel room the rest is gravy

198plus · 06-06-2009, 10:52 PM

What kind of goodies did you find..........Probably the ones I was looking for and couldn't find

[QUOTE=Alan's Classic;3346554]more pics, I'll be posting some pics of the goodies I got today later tonight.

Alan's Classic · 06-06-2009, 10:55 PM

Quote:

Originally Posted by hAetWagon

I'd love to see a pic of that.

I don't have one handy. I was hoping someone might post one. I think CPP as well as others offer the kit.

Quote:

Originally Posted by TimE

From looking at the pics, it appears that you have a big block infatuation.

Your right.

I found these headers at Super Chevy today for a good price. They are Headman 69648 fits 88-95 chevy trucks. I thought I would try them. They are very similar to the Flowtech 31505 FLT headers I was going to try. I could sell them and get my money back if the weren't close to fitting. The right side that I was concerned that wouldn't fit didn't have any issues to speak of. Once I put the gasket in it will rub the frame on one tube.

In able to make these studs work I needed to cut some more threads so I could put a nut for the headers. I also need to cut the flange off of the flange nut that is hitting the header. I also need to shorten the stud to ease installation.

The side I thought would fit has some issues. I don't know if I should grind about a 1/4" off of the frame around 3 of the tubes or not. I'm thinking of making them work. What do ya'll think?

The left header has an O2 sensor bung that is blocked off.

Here are some other things I picked up
1. Door inner/outer belt mouldings
2. Door wing window seals w/rivets and tool
3. Door glass run weatherstrip
4. Door wing window latches
5. Door O/S handles and lock cylinder not pictured
6. Jegs mini starter

I will be doing a how too on rebuilding the vent window assy once I figure it out.

06-04-2009, 10:08 PM	#1276
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread Some times the cheap crap won't last long. It will cost you more in the end. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

06-04-2009, 10:41 PM	#1277
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread True... I got them realy cheap from s&w. I think i paied 25 a box for them. They dont last as long but for the price at the time....sweet __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

06-04-2009, 11:38 PM	#1279
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread looking great. __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

06-04-2009, 11:40 PM	#1280
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: My 1965 build thread I've used WIW thread without much luck so I will post my question here. I need to know WIW on the steering wheel and ring. The wheel has some stress cracks. And pitting on the chrome. Thanks __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

06-04-2009, 11:40 PM	#1281
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: My 1965 build thread nice work on the m/c Alan....Tony should know on the WIW for the steering wheel and chrome horn ring.. a new reproduction wheel goes for around $150 to $200 I beleive. so mayby,, and I'm guessing with the horn ring around $75 to $100??? __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q Last edited by 4dranch; 06-04-2009 at 11:44 PM.

06-04-2009, 11:44 PM	#1282
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread I would guess @ $50 for the wheel...but I'm a cheap ass __________________ *CHEVY ONLY*

06-05-2009, 01:04 AM	#1283
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread HMM GOOD QUESTION.. i HAVE ONE OF THESE LAYIN IN THE SHED FLOOR __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

06-05-2009, 09:13 AM	#1285
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread lol yeah I get annoyed by it to. but they wont let me use small caps at work so I get into that habit __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

06-05-2009, 10:55 PM	#1287
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: My 1965 build thread $350 not bad for a nights work. Looks nice. Now I'm going to go do mine. I'm thinking I have about 10hrs in mine and it looks like $hit. Another 10 and it will be fine.

06-05-2009, 10:55 PM	#1288
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: My 1965 build thread looks good __________________ Gage 1967 C10 Shortbed Stepside

06-06-2009, 08:45 PM	#1292
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: My 1965 build thread more pics, I'll be posting some pics of the goodies I got today later tonight. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker" Last edited by Alan's Classic; 06-06-2009 at 08:46 PM.

06-06-2009, 09:06 PM	#1293
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: My 1965 build thread Why doesn't that black truck have a brake booster?

06-06-2009, 09:25 PM	#1296
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: My 1965 build thread They all look good. I like the lip on the rims too. Can't wait for the Boise car show.

06-06-2009, 10:06 PM	#1297
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: My 1965 build thread From looking at the pics, it appears that you have a big block infatuation. __________________ Just hopin' I live long enough to finish something!!!

06-06-2009, 10:18 PM	#1298
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread I hooked up power braked on a 30 with frame mounted power booster. As long as you have the pedel room the rest is gravy __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)



Register or Log In To remove these advertisements.

06-06-2009, 10:52 PM	#1299
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: My 1965 build thread What kind of goodies did you find..........Probably the ones I was looking for and couldn't find [QUOTE=Alan's Classic;3346554]more pics, I'll be posting some pics of the goodies I got today later tonight.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.