This is worth it right? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC406 · 06-09-2009, 10:25 PM

Found this truck in some local classifieds. 600 bucks. Its a 61 3/4 ton. I think I could come up with the money, its 2.5 hours away and I just sold my car trailer so something would have to be araged there, but I have a 71 and would like to collect decades, aside from the driver door it apears pretty solid, what do you all think? O ya, if it dosnt sell soon it goes to the crusher-not cool at all would be a shame!

jonathan-m · 06-09-2009, 10:45 PM

If they were going to crush it I'm sure you could work up a better deal than 600 bucks... but yeah its definitely worth saving at that price.

**Captainfab** · 06-10-2009, 12:19 AM

The outside doesn't look too bad, and the interior looks to be unmolested which is rare. If it doesn't run I would make them an offer.....the worst they can say is no. It would be a shame for this to go to the crusher.

MacAttack · 06-10-2009, 10:30 AM

Yeah, I'd do it - if I had the space to store it.

Phildooney · 06-10-2009, 10:35 AM

Yes I reckon you should go for it at that price. Most of the panels look straight so in parts alone its a bargain. Phil

1964C10 · 06-10-2009, 10:50 AM

If you have spare time even at $600 you could make money parting it out, those hood are rare and so is the grille. One a good day just those two could probably fetch you $400. All that would be better the the crusher!!! Sorta like a donor card on a DL ;-)

TwoFiftyShifter · 06-10-2009, 12:28 PM

Is that a dual master cylinder? LOVE the interior..... I'd pick that big old jalopy up in a minute - Lots of parts there, GMC stuff is tough to find as stated.

bobjob · 06-10-2009, 12:33 PM

grab it!!!

J-man · 06-10-2009, 08:00 PM

yea i'd do it...i'd be ashamed to let it go to the crusher...also its a gmc which is hard to come by...i'd make them an offer and see wat they say. the worst would be no...and also if that is the original v6 that is rare...and i dnt know about you but i lyke having rare things...it makes it a good learning experience...so grab it before it gets away...i would

**slepysal** · 06-10-2009, 08:01 PM

Quote:

Originally Posted by TwoFiftyShifter

Is that a dual master cylinder? LOVE the interior..... I'd pick that big old jalopy up in a minute - Lots of parts there, GMC stuff is tough to find as stated.

yea, 60-62 used a combo master cylinder it is a dual ,one for brakes and one for the clutch (hydralic)
I agree snatch it up

hewlett2002000 · 06-10-2009, 08:45 PM

thats my hood!!!!! lol ive been looking for a hood like that for years. ive never even seen one in person and ive seen alot of these trucks. go for it man, and if you sell the hood lemme know ill pay any price!!!! lmao just dont let that truck go to the crusher.
John

GMC406 · 06-10-2009, 09:19 PM

I definitly am gonna try I fell in love with it already> I have a 71 GMC and a 91 GMC, I am a GMC finnatic! Just like the looks better, plus in these days they were rarer and heavy duty. I would like to decade jump, 51, 61 ,71. If I pick this up that just leave the 51.(Good luck with that one

)

Demmit_Hemmit's 65 · 06-10-2009, 11:43 PM

Looks like a good deal to me........................I'd try to get him down on the price a bit though.............................don't let it get crushed.................................Hemmit

06-09-2009, 10:25 PM	#1
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	This is worth it right? Found this truck in some local classifieds. 600 bucks. Its a 61 3/4 ton. I think I could come up with the money, its 2.5 hours away and I just sold my car trailer so something would have to be araged there, but I have a 71 and would like to collect decades, aside from the driver door it apears pretty solid, what do you all think? O ya, if it dosnt sell soon it goes to the crusher-not cool at all would be a shame! Attached Images __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks! Last edited by GMC406; 06-09-2009 at 10:28 PM.

06-09-2009, 10:45 PM	#2
jonathan-m Registered User Join Date: Feb 2007 Location: Phoenix Az Posts: 432	Re: This is worth it right? If they were going to crush it I'm sure you could work up a better deal than 600 bucks... but yeah its definitely worth saving at that price. __________________ Rockin' a '66 and loving every minute of it

06-10-2009, 12:19 AM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: This is worth it right? The outside doesn't look too bad, and the interior looks to be unmolested which is rare. If it doesn't run I would make them an offer.....the worst they can say is no. It would be a shame for this to go to the crusher. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-10-2009, 10:30 AM	#4
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: This is worth it right? Yeah, I'd do it - if I had the space to store it. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

06-10-2009, 10:35 AM	#5
Phildooney Registered User Join Date: May 2007 Location: South Coast of England Posts: 119	Re: This is worth it right? Yes I reckon you should go for it at that price. Most of the panels look straight so in parts alone its a bargain. Phil __________________ PHILDOONEY

06-10-2009, 10:50 AM	#6
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: This is worth it right? If you have spare time even at $600 you could make money parting it out, those hood are rare and so is the grille. One a good day just those two could probably fetch you $400. All that would be better the the crusher!!! Sorta like a donor card on a DL ;-) __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it

06-10-2009, 12:28 PM	#7
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: This is worth it right? Is that a dual master cylinder? LOVE the interior..... I'd pick that big old jalopy up in a minute - Lots of parts there, GMC stuff is tough to find as stated. __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

06-10-2009, 12:33 PM	#8
bobjob Registered User Join Date: May 2009 Location: florence arizona Posts: 53	Re: This is worth it right? grab it!!!

06-10-2009, 08:00 PM	#9
J-man Registered User Join Date: Jun 2009 Location: Lancaster,SC Posts: 8	Re: This is worth it right? yea i'd do it...i'd be ashamed to let it go to the crusher...also its a gmc which is hard to come by...i'd make them an offer and see wat they say. the worst would be no...and also if that is the original v6 that is rare...and i dnt know about you but i lyke having rare things...it makes it a good learning experience...so grab it before it gets away...i would

06-10-2009, 08:45 PM	#11
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: This is worth it right? thats my hood!!!!! lol ive been looking for a hood like that for years. ive never even seen one in person and ive seen alot of these trucks. go for it man, and if you sell the hood lemme know ill pay any price!!!! lmao just dont let that truck go to the crusher. John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

06-10-2009, 09:19 PM	#12
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: This is worth it right? I definitly am gonna try I fell in love with it already> I have a 71 GMC and a 91 GMC, I am a GMC finnatic! Just like the looks better, plus in these days they were rarer and heavy duty. I would like to decade jump, 51, 61 ,71. If I pick this up that just leave the 51.(Good luck with that one) __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

06-10-2009, 11:43 PM	#13
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Re: This is worth it right? Looks like a good deal to me........................I'd try to get him down on the price a bit though.............................don't let it get crushed.................................Hemmit

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.