cross your fingers for me........ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

QKENUF4U · 05-28-2009, 11:04 PM

hopin come this weekend i will have another oldie but goodie truck since i had to sell my 71 prostreet after my seperation after 8yrs.......

anyways heres pics.... MIGHT be trading for my 91 k1500 if things go right....

straight six with 3 on the floor..... hoping for more pics of engine/bed etc... and its in primer and my gallon of orange is crying to be used !!!!!

67ChevyRedneck · 05-28-2009, 11:08 PM

That's a sweet lookin' little 67!

dan42 · 05-28-2009, 11:08 PM

That's a nice looking '67. I hope it works out for you.

*67chevy3/4tontruck* · 05-28-2009, 11:15 PM

That is a sweet looking 67 chevy truck so is the inline six a 292 or a 250 if its the 292 that engine is hard too find evening parts for the 292 too

QKENUF4U · 05-28-2009, 11:35 PM

not sure which 6 it has but either way it will still go forever from what ive seen of 6's. my buds van has over 300k on it and still funs fine... only thing i will HAVE to change is the bed. I HATE STEP SIDES !!!!!!! have to find a nice clean fleet to put on it....

sleepertruck72 · 05-29-2009, 12:57 AM

Nice looking truck ! If I may give my 2 cents, keep the stepside !

jim zag · 05-29-2009, 06:07 AM

That thing is TOO COOL!!! I WANT A STEPSIDE TOO!!!!

**DANTIP** · 05-29-2009, 06:50 AM

We in the Midwest are always envious when we see what looks like a rust-free Western truck!

Good Luck with it!!

big_al_71 · 05-29-2009, 08:42 AM

that truck looks very nice.

**bigsnookmaster** · 05-29-2009, 08:45 AM

Nice truck! Keep the stepside, everyone's got a fleetside! Except me.

BossHogg69 · 05-29-2009, 09:46 AM

I like that little rig!! Keep the stepper, it looks good, but I may be a little partial...

Eddie09 · 05-29-2009, 11:45 AM

Nice 67! Keep the stepside! Have one myself!

tcb-1 · 05-29-2009, 12:29 PM

how dare you talk about stepsides like that!!!

seriously, nice, nice rig. more pics WHEN you get it!!

QKENUF4U · 05-29-2009, 06:23 PM

Quote:

Originally Posted by tcb-1

how dare you talk about stepsides like that!!!

seriously, nice, nice rig. more pics WHEN you get it!!

lol the 91 i might trade was a step side too. took care of that fugly problem real quick !!! got a nice shaved fleetside bed on it now....

actually just finished welding in the new floor panel from the 3'x4' hole that was in it , it came from a 2wd lowrider so he cut the floor for his suspension....
i doubt he will trade since my truck is nice but i dont think its nice enough...

chevychase · 05-29-2009, 07:03 PM

Crossing my fingers for ya, Good luck!

68C15 · 05-29-2009, 10:00 PM

there's just something about a small window 67 stepper. but I am biased.

Sammy · 05-29-2009, 10:03 PM

Sweet looking lady there.

**special-K** · 05-30-2009, 09:37 AM

That`s real nice and I`m a keep the Stepside guy.At least live with it until all else is done how you like it.And remember,it`s all in your mind...

tcb-1 · 05-30-2009, 03:39 PM

wish I lived closer, I'd take that "ugly" stepside bed off you! good luck on the purchase!!!

Wilson_ · 05-30-2009, 04:19 PM

Quote:

Originally Posted by 68C15

there's just something about a small window 67 stepper. but I am biased.

yep i agree,

it looks like a good starting point!

heavy71chevy · 05-30-2009, 07:14 PM

That a very nice start and id keep that stepper...always thought they look muscle even tho im a long fleet guy

**Hart_Rod** · 06-13-2009, 12:29 PM

Updates???

QKENUF4U · 06-13-2009, 03:50 PM

guess guy decided to not do the trade... got back from phoenix and emailed him and never heard anything back. tried calling and no answer.. so guess its a bust

FRENCHBLUE72 · 06-13-2009, 08:17 PM

Bummer man I was really pulling for ya to get it..

05-28-2009, 11:04 PM	#1
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	cross your fingers for me........ hopin come this weekend i will have another oldie but goodie truck since i had to sell my 71 prostreet after my seperation after 8yrs....... anyways heres pics.... MIGHT be trading for my 91 k1500 if things go right.... straight six with 3 on the floor..... hoping for more pics of engine/bed etc... and its in primer and my gallon of orange is crying to be used !!!!! Last edited by QKENUF4U; 05-28-2009 at 11:05 PM.

05-28-2009, 11:08 PM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: cross your fingers for me........ That's a sweet lookin' little 67! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

05-28-2009, 11:08 PM	#3
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: cross your fingers for me........ That's a nice looking '67. I hope it works out for you. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

05-28-2009, 11:15 PM	#4
67chevy3/4tontruck Account Suspended Join Date: May 2009 Location: atown Fl Posts: 42	Re: cross your fingers for me........ That is a sweet looking 67 chevy truck so is the inline six a 292 or a 250 if its the 292 that engine is hard too find evening parts for the 292 too

05-28-2009, 11:35 PM	#5
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: cross your fingers for me........ not sure which 6 it has but either way it will still go forever from what ive seen of 6's. my buds van has over 300k on it and still funs fine... only thing i will HAVE to change is the bed. I HATE STEP SIDES !!!!!!! have to find a nice clean fleet to put on it.... Last edited by QKENUF4U; 05-28-2009 at 11:36 PM.

05-29-2009, 12:57 AM	#6
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: cross your fingers for me........ Nice looking truck ! If I may give my 2 cents, keep the stepside ! __________________ 72 C20 Longbed 05 1500 Z71

05-29-2009, 06:07 AM	#7
jim zag ENGINE BUILDER Join Date: Apr 2006 Location: Shortsville n.y. Posts: 344	Re: cross your fingers for me........ That thing is TOO COOL!!! I WANT A STEPSIDE TOO!!!! __________________ JIM ZAG

05-29-2009, 06:50 AM	#8
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,890	Re: cross your fingers for me........ We in the Midwest are always envious when we see what looks like a rust-free Western truck! Good Luck with it!!

05-29-2009, 08:42 AM	#9
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: cross your fingers for me........ that truck looks very nice. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-29-2009, 08:45 AM	#10
bigsnookmaster Senior Member Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,270	Re: cross your fingers for me........ Nice truck! Keep the stepside, everyone's got a fleetside! Except me. __________________ greg http://community.webshots.com/user/68406Stepside

05-29-2009, 09:46 AM	#11
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: cross your fingers for me........ I like that little rig!! Keep the stepper, it looks good, but I may be a little partial... __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

05-29-2009, 11:45 AM	#12
Eddie09 Registered User Join Date: Feb 2009 Location: Kansas City, Kansas Posts: 73	Re: cross your fingers for me........ Nice 67! Keep the stepside! Have one myself! __________________ 67 chevy c10 stepside.

05-29-2009, 12:29 PM	#13
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: cross your fingers for me........ how dare you talk about stepsides like that!!! seriously, nice, nice rig. more pics WHEN you get it!! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

05-29-2009, 07:03 PM	#15
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Re: cross your fingers for me........ Crossing my fingers for ya, Good luck! __________________ Joe

05-29-2009, 10:00 PM	#16
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: cross your fingers for me........ there's just something about a small window 67 stepper. but I am biased.



Register or Log In To remove these advertisements.

05-29-2009, 10:03 PM	#17
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: cross your fingers for me........ Sweet looking lady there. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

05-30-2009, 09:37 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: cross your fingers for me........ That`s real nice and I`m a keep the Stepside guy.At least live with it until all else is done how you like it.And remember,it`s all in your mind... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-30-2009 at 09:39 AM.

05-30-2009, 03:39 PM	#19
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: cross your fingers for me........ wish I lived closer, I'd take that "ugly" stepside bed off you! good luck on the purchase!!! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

05-30-2009, 07:14 PM	#21
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: cross your fingers for me........ That a very nice start and id keep that stepper...always thought they look muscle even tho im a long fleet guy __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

06-13-2009, 12:29 PM	#22
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,862	Re: cross your fingers for me........ Updates??? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-13-2009, 03:50 PM	#23
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: cross your fingers for me........ guess guy decided to not do the trade... got back from phoenix and emailed him and never heard anything back. tried calling and no answer.. so guess its a bust

06-13-2009, 08:17 PM	#24
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: cross your fingers for me........ Bummer man I was really pulling for ya to get it.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.