has any one build a custom frame for a blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cvalcore · 07-12-2009, 08:40 PM

i bought this tub and its going to be 2wd ive got a 4x4 frame and converted to 2wd i new that the frame horn on the passengers side was bent but i think it goes back alot further than that after puting the body on im pritty shure its might be twisted i was wondering if any one has build a frame out of 2 by 4 tubing.

BLUE THUNDER · 07-12-2009, 09:52 PM

Not that i'm aware of.

bouncytruck · 07-12-2009, 11:46 PM

I believe that there are a few pickups on the board with custom frames.

**SOON2BLAZE** · 07-13-2009, 04:00 PM

theres a guy down here with a 72
4x4 rolling frame you could convert. I might be able to get ahold of him. I wonder what a good shop would charge to repair it if is repairable?

Skirkpat · 07-13-2009, 04:55 PM

Not a Blazer, but you get the Idea..
http://67-72chevytrucks.com/vboard/s...d.php?t=303594

bouncytruck · 07-13-2009, 05:12 PM

http://www.jimmeyerracing.com/ will build you a custom frame for $$$$$$.

NTR72GMC · 07-13-2009, 07:19 PM

Maybe try a body shop that has a frame rack they might be able to get it back in shape.

tallhoedude · 07-14-2009, 08:24 AM

i dont think a straight frame would be that hard for a blazer.thought about it a lot when building mine,kind wished i would have done it that way.
ive got a true fisher body 71 crewcab that will probably be getting one starting this winter.

OARNGESI · 07-15-2009, 07:14 PM

I saved this pic from a thread i found while searching its from a custom blazer
ILL TRY AND GET A LINK TO WHERE I FOUND IT

OARNGESI · 07-15-2009, 07:33 PM

http://www.streetsource.com/Profile....rofileID=47694

cvalcore · 07-15-2009, 11:41 PM

that frame is sweet my only problem is i wont to retain the back seat. i would like to straighten the stock frame but they are never really quit straight again and im going for show rig i wont every part of to look flawles as possible i no that no one will probably see it but i will.

07-12-2009, 08:40 PM	#1
cvalcore Registered User Join Date: Oct 2008 Location: Monroe IA Posts: 272	has any one build a custom frame for a blazer i bought this tub and its going to be 2wd ive got a 4x4 frame and converted to 2wd i new that the frame horn on the passengers side was bent but i think it goes back alot further than that after puting the body on im pritty shure its might be twisted i was wondering if any one has build a frame out of 2 by 4 tubing. Last edited by cvalcore; 07-12-2009 at 11:06 PM.

07-12-2009, 09:52 PM	#2
BLUE THUNDER Registered User Join Date: May 2007 Location: San Antonio Posts: 993	Re: has any one build a custom frame for a blazer Not that i'm aware of.

07-12-2009, 11:46 PM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: has any one build a custom frame for a blazer I believe that there are a few pickups on the board with custom frames. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

07-13-2009, 04:00 PM	#4
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: has any one build a custom frame for a blazer theres a guy down here with a 72 4x4 rolling frame you could convert. I might be able to get ahold of him. I wonder what a good shop would charge to repair it if is repairable?

07-13-2009, 04:55 PM	#5
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: has any one build a custom frame for a blazer Not a Blazer, but you get the Idea.. http://67-72chevytrucks.com/vboard/s...d.php?t=303594 __________________ 1969 Short Stepside 1969 4 WD Suburban 1970 1 Ton Dually....Misfit oh, and a 2001 HD 2500, 8.1 Allison Shortbed 4 Door

07-13-2009, 05:12 PM	#6
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: has any one build a custom frame for a blazer http://www.jimmeyerracing.com/ will build you a custom frame for $$$$$$. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

07-13-2009, 07:19 PM	#7
NTR72GMC 2wd FTW!!!! Join Date: Jan 2007 Location: SLC UTAH Posts: 673	Re: has any one build a custom frame for a blazer Maybe try a body shop that has a frame rack they might be able to get it back in shape.

07-14-2009, 08:24 AM	#8
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: has any one build a custom frame for a blazer i dont think a straight frame would be that hard for a blazer.thought about it a lot when building mine,kind wished i would have done it that way. ive got a true fisher body 71 crewcab that will probably be getting one starting this winter. __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

07-15-2009, 07:14 PM	#9
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: has any one build a custom frame for a blazer I saved this pic from a thread i found while searching its from a custom blazer ILL TRY AND GET A LINK TO WHERE I FOUND IT Attached Images __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

07-15-2009, 07:33 PM	#10
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: has any one build a custom frame for a blazer http://www.streetsource.com/Profile....rofileID=47694 __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

07-15-2009, 11:41 PM	#11
cvalcore Registered User Join Date: Oct 2008 Location: Monroe IA Posts: 272	Re: has any one build a custom frame for a blazer that frame is sweet my only problem is i wont to retain the back seat. i would like to straighten the stock frame but they are never really quit straight again and im going for show rig i wont every part of to look flawles as possible i no that no one will probably see it but i will.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.