Impala, Caprice, Roadmaster rear-end - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GR82BME · 07-16-2009, 09:58 AM

Has anyone put in an impala, caprice, or roadmaster rear-end in 60-66 Chevy trucks? The reason I ask is because I see rear disc kits being sold on here that require the disc and caliper from one of these cars to go on the bracket that they are selling. I will be doing a swap before long and was wondering why not just swap out the whole axle? Are these axles factory posi?
Any information would be appreciated.
Thanks Derek

Oklahoma · 07-16-2009, 11:10 AM

I would also like to know

bigwavy · 07-16-2009, 02:15 PM

I have one in my 64. Disc brakes and a posi. 5x5 bolt pattern. We are in the process of doing the rear fab work now. (Notch etc...) Cut off the old saddles and weld in new ones for the TA's. Also you will have to relocate the trac bar on certain years that have the boss on the pumpkin. I can't remember how much, but it is a little wider . I'll try to post some pics as we are mocking this up as I type this. Doug

protrash64 · 07-16-2009, 05:40 PM

Really all you need are the 'crooked' axle saddles to do the swap and check to make sure your backspacing and axle width wont be an issue.

65 on 24s · 07-16-2009, 08:49 PM

i did mine got 3.23 gears in it

65 on 24s · 07-16-2009, 08:53 PM

go look at the pic on my clubs myspace pics i got pics of it. myspace.com/vcofmemphis

bigwavy · 07-17-2009, 08:10 AM

As promised here is the pic. It is about 1" wider than the stock rear. Approx 58". I still have to weld in the saddles, airbag mounts, shock tabs and track bar. Hope this helps. Go for it. Doug

**Captainfab** · 07-17-2009, 03:48 PM

Quote:

Originally Posted by bigwavy

As promised here is the pic. It is about 1" wider than the stock rear. Approx 58". I still have to weld in the saddles, airbag mounts, shock tabs and track bar. Hope this helps. Go for it. Doug

Where are you measuring to? The original '63-'70 truck 12 bolts measure 63 1/8" from WMS to WMS.

bigwavy · 07-17-2009, 06:13 PM

To the backing plate

bigwavy · 07-17-2009, 06:30 PM

Ok I had to go out to the shop and re-measure everything again.

From where the wheel mounts it is approximately 61 inches. So I guess that makes it narrower than stock. Thanks Captain.

GR82BME · 07-18-2009, 08:41 PM

Sounds good, thanks for the info guys.

07-16-2009, 09:58 AM	#1
GR82BME Registered User Join Date: Oct 2006 Location: Billings MT Posts: 38	Impala, Caprice, Roadmaster rear-end Has anyone put in an impala, caprice, or roadmaster rear-end in 60-66 Chevy trucks? The reason I ask is because I see rear disc kits being sold on here that require the disc and caliper from one of these cars to go on the bracket that they are selling. I will be doing a swap before long and was wondering why not just swap out the whole axle? Are these axles factory posi? Any information would be appreciated. Thanks Derek

07-16-2009, 11:10 AM	#2
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: Impala, Caprice, Roadmaster rear-end I would also like to know

07-16-2009, 02:15 PM	#3
bigwavy Registered User Join Date: Jan 2007 Location: Northfield, Ohio,USA Posts: 18	Re: Impala, Caprice, Roadmaster rear-end I have one in my 64. Disc brakes and a posi. 5x5 bolt pattern. We are in the process of doing the rear fab work now. (Notch etc...) Cut off the old saddles and weld in new ones for the TA's. Also you will have to relocate the trac bar on certain years that have the boss on the pumpkin. I can't remember how much, but it is a little wider . I'll try to post some pics as we are mocking this up as I type this. Doug

07-16-2009, 05:40 PM	#4
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Impala, Caprice, Roadmaster rear-end Really all you need are the 'crooked' axle saddles to do the swap and check to make sure your backspacing and axle width wont be an issue. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

07-16-2009, 08:49 PM	#5
65 on 24s Registered User Join Date: Jul 2009 Location: memphis ( nutbush ) tn, Posts: 65	Re: Impala, Caprice, Roadmaster rear-end i did mine got 3.23 gears in it

07-16-2009, 08:53 PM	#6
65 on 24s Registered User Join Date: Jul 2009 Location: memphis ( nutbush ) tn, Posts: 65	Re: Impala, Caprice, Roadmaster rear-end go look at the pic on my clubs myspace pics i got pics of it. myspace.com/vcofmemphis

07-17-2009, 08:10 AM	#7
bigwavy Registered User Join Date: Jan 2007 Location: Northfield, Ohio,USA Posts: 18	Re: Impala, Caprice, Roadmaster rear-end As promised here is the pic. It is about 1" wider than the stock rear. Approx 58". I still have to weld in the saddles, airbag mounts, shock tabs and track bar. Hope this helps. Go for it. Doug Attached Images

07-17-2009, 06:13 PM	#9
bigwavy Registered User Join Date: Jan 2007 Location: Northfield, Ohio,USA Posts: 18	Re: Impala, Caprice, Roadmaster rear-end To the backing plate

07-17-2009, 06:30 PM	#10
bigwavy Registered User Join Date: Jan 2007 Location: Northfield, Ohio,USA Posts: 18	Re: Impala, Caprice, Roadmaster rear-end Ok I had to go out to the shop and re-measure everything again. From where the wheel mounts it is approximately 61 inches. So I guess that makes it narrower than stock. Thanks Captain.

07-18-2009, 08:41 PM	#11
GR82BME Registered User Join Date: Oct 2006 Location: Billings MT Posts: 38	Re: Impala, Caprice, Roadmaster rear-end Sounds good, thanks for the info guys.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.