Identify Exhaust/intake valves - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Big Fenders · 07-28-2009, 03:48 PM

I'm doing initial timing on my 350, pulled drivers side rocker cover and watching valves open and close I forgot which is which. Manual shows valve config. for 348 and 409 don't know if 350 is the same.
Bob

Tx Firefighter · 07-28-2009, 04:16 PM

e-i-i-e-e-i-i-e when looking at the head.

Big Fenders · 07-28-2009, 08:55 PM

Thanks

Northern lights · 07-28-2009, 10:24 PM

When unsure, just look at the valve in relation to the intake and exhaust manifold. The intake valves will line up with intake runners and exhaust valves will line up with exhaust manifold ports.

07-28-2009, 03:48 PM	#1
Big Fenders Registered User Join Date: Mar 2008 Location: Tucson Arizona Posts: 264	Identify Exhaust/intake valves I'm doing initial timing on my 350, pulled drivers side rocker cover and watching valves open and close I forgot which is which. Manual shows valve config. for 348 and 409 don't know if 350 is the same. Bob

07-28-2009, 04:16 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Identify Exhaust/intake valves e-i-i-e-e-i-i-e when looking at the head. __________________ I'm on the Instagram- @Gearhead_Kevin

07-28-2009, 08:55 PM	#3
Big Fenders Registered User Join Date: Mar 2008 Location: Tucson Arizona Posts: 264	Re: Identify Exhaust/intake valves Thanks

07-28-2009, 10:24 PM	#4
Northern lights Registered User Join Date: Jul 2009 Location: Whitemud Alberta Posts: 328	Re: Identify Exhaust/intake valves When unsure, just look at the valve in relation to the intake and exhaust manifold. The intake valves will line up with intake runners and exhaust valves will line up with exhaust manifold ports.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.