coated 1 3/4" headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tracy Focht · 04-09-2003, 06:18 PM

selling for a friend, they have been JetHot coated and are 1 3/4" to 3" collector...$200...used.

**crossy** · 04-13-2003, 12:53 PM

tracy, I'm sure you listed them right but MOST are 1-5/8" . they must be brand name headers to be 1-3/4". since they are used is it possible to get a pic sent to all4trux@snip.net ? thanx , DAVE

bigblock73 · 04-13-2003, 08:09 PM

SB or BB? I am assuming SB but it never hurts to ask.

-Jeff

alf4444 · 04-16-2003, 10:16 AM

need more info, what did they come off of, or what will they fit?

Tracy Focht · 04-16-2003, 12:05 PM

yes, they are 1 3/4 HPC coated...off an '87 SWB Chevy with my old 383 in it.....

Tracy Focht · 04-16-2003, 12:06 PM

email me if you want pics, and I will have Dale send you pics...Phoenix also bought some rims off this guy...so he knows him too...

PHOENIX · 04-16-2003, 12:16 PM

Just so you guys know. I bought the wheels in that picture above from Tracy's friend. I had no problems with the order and they were shipped promptly (is that right

?). Anyway for those curious about the purchase I just wanted to say that I had no problems with the transaction what so ever.

If this was Ebay I would say:
Good seller, no problems, shipped fast, would buy from again.

Tracy Focht · 04-16-2003, 01:45 PM

thanks Eddie! Post pics of your wheels soon!

81lwb350 · 04-16-2003, 04:49 PM

are the headers still available..
could be interested!

reply to graphicfix@cox.net if you have pics!

thanks
anthony

Tracy Focht · 04-16-2003, 05:05 PM

yes, and he hasn't sent me pics yet...he is out of town today...but should by tomorrow...

TIMSPEED · 04-16-2003, 05:32 PM

Hey Tracey, how low is that truck you posted? It looks like a 5/7, is it?

Tracy Focht · 04-16-2003, 05:34 PM

he bagged it...it will lay on the ground...

phantom dually · 04-16-2003, 09:09 PM

Send me some pics!! Thanks

kevhill85 · 04-16-2003, 09:13 PM

send pic to ss383chevy@wmconnect.com

phantom dually · 04-16-2003, 11:37 PM

Spoke with a guy from JEGs and he suggested a shorty hedmann that is HPC coated and also a shorty for $259.00. They Have 1 5/8" tubes and three inch collectors. They are made for a 82-92 Camaro but will clear on our trucks. Part # 289-86118

Tracy Focht · 04-17-2003, 09:34 AM

I have pics now...email me and I will send them to you.

04-09-2003, 06:18 PM	#1
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	coated 1 3/4" headers selling for a friend, they have been JetHot coated and are 1 3/4" to 3" collector...$200...used.

04-13-2003, 12:53 PM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	tracy, I'm sure you listed them right but MOST are 1-5/8" . they must be brand name headers to be 1-3/4". since they are used is it possible to get a pic sent to all4trux@snip.net ? thanx , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

04-16-2003, 10:16 AM	#4
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	need more info, what did they come off of, or what will they fit? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-16-2003, 12:05 PM	#5
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	yes, they are 1 3/4 HPC coated...off an '87 SWB Chevy with my old 383 in it..... Attached Images

04-16-2003, 12:16 PM	#7
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Just so you guys know. I bought the wheels in that picture above from Tracy's friend. I had no problems with the order and they were shipped promptly (is that right ?). Anyway for those curious about the purchase I just wanted to say that I had no problems with the transaction what so ever. If this was Ebay I would say: Good seller, no problems, shipped fast, would buy from again. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

04-13-2003, 08:09 PM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	SB or BB? I am assuming SB but it never hurts to ask. -Jeff

04-16-2003, 12:06 PM	#6
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	email me if you want pics, and I will have Dale send you pics...Phoenix also bought some rims off this guy...so he knows him too...

04-16-2003, 01:45 PM	#8
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	thanks Eddie! Post pics of your wheels soon!

04-16-2003, 04:49 PM	#9
81lwb350 big block lover Join Date: Jul 2002 Location: louisiana Posts: 107	are the headers still available.. could be interested! reply to graphicfix@cox.net if you have pics! thanks anthony

04-16-2003, 05:05 PM	#10
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	yes, and he hasn't sent me pics yet...he is out of town today...but should by tomorrow...

04-16-2003, 05:32 PM	#11
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Hey Tracey, how low is that truck you posted? It looks like a 5/7, is it? __________________ I have a few cars... See Them Here

04-16-2003, 05:34 PM	#12
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	he bagged it...it will lay on the ground...

04-16-2003, 09:09 PM	#13
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Send me some pics!! Thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

04-16-2003, 09:13 PM	#14
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	send pic to ss383chevy@wmconnect.com __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

04-16-2003, 11:37 PM	#15
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Spoke with a guy from JEGs and he suggested a shorty hedmann that is HPC coated and also a shorty for $259.00. They Have 1 5/8" tubes and three inch collectors. They are made for a 82-92 Camaro but will clear on our trucks. Part # 289-86118 __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

04-17-2003, 09:34 AM	#16
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	I have pics now...email me and I will send them to you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.