time to get stoked!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OARNGESI · 09-19-2009, 11:20 AM

Quote:

Originally Posted by bludshaker

i am new to posting on this board but i really liked this thread! So here's what i just got back on the road yesterday! My 1970 step. Just reworked the whole suspension, and put in some new interior!

really nice anymore pics

FRENCHBLUE72 · 09-19-2009, 03:27 PM

My 72 laid out and my 56 finally on the road......

abadsvt · 09-20-2009, 11:30 AM

Heres two pics that i am really proud of. I really like the headers because that was my first try at building headers.

Great job everyone on there projects!!! They look great!!!

LUV2XCLR8 · 09-20-2009, 11:39 AM

To quote singer "Jordan Sparks" and one of her hits "No Air"

She recently hit roller status w/ PorterBuilt Arms

smashingchuck · 09-20-2009, 11:47 AM

Since the current theme seems to rolling chassis, figured I might as well post up.

*Shane* · 09-20-2009, 12:27 PM

looks awesome chuck ... what brand/type are those mufflers?

smashingchuck · 09-20-2009, 12:30 PM

Quote:

Originally Posted by Shane

looks awesome chuck ... what brand/type are those mufflers?

Thanks man. They are Hushpower II's made by Flowmaster. The whole exhaust is stainless as well as the air lines.

*Shane* · 09-20-2009, 01:11 PM

Thanks for the info ... can you tell me what length they are?

smashingchuck · 09-20-2009, 01:45 PM

Quote:

Originally Posted by Shane

Thanks for the info ... can you tell me what length they are?

Case Length (in) 18.000 in.
Overall Length (in) 24.000 in.
Thickness (in) 4.000 in.
Width (in) 5.500 in.

I can give you more precise measurements later if you the website ones don't tell you what you need.

*Shane* · 09-20-2009, 02:24 PM

I think that'll do it ... Aweseome! Thanks! Rep points to you!

**lolife99** · 09-20-2009, 04:21 PM

I am Stoked!
Finally got the Boss 338 wheel mystery figured out.

Look here:
http://67-72chevytrucks.com/vboard/s...352320&page=12

fiddy9apache · 09-20-2009, 06:36 PM

my 59, i dont drive as much as i should...

bludshaker · 09-20-2009, 07:13 PM

I love that Apache! Nice ride homie!:

smashingchuck · 09-20-2009, 07:39 PM

Quote:

Originally Posted by fiddy9apache

my 59, i dont drive as much as i should...

What the heck is wrong with you?!? I'd drive the wheels off that ride!!

redsled04 · 09-20-2009, 07:47 PM

My ladies Sonoma I started on last week.All Kp Compnents of course.And 4 Viair 380's.Im Setting it up to lay frame on 20 and 22's.

72BlckButy · 09-21-2009, 02:31 PM

With the help of lolife99, we gave my '69 an attitude adjustment...

4.5/6" ECE drop, with 6-lug disc brake upgrade:

Name: DSCN5356.jpg
Views: 227
Size: 51.7 KB

Also with the help of lolife99 and hot trux, I was able to correct the front track width with a set of hard to find 15x7 6-lug rally wheels:

Name: DSCN5372.jpg
Views: 223
Size: 45.0 KB

Name: DSCN5372.jpg
Views: 223
Size: 45.0 KB

Name: DSCN5545.jpg
Views: 220
Size: 62.1 KB

c10addict · 09-23-2009, 10:21 AM

Got the rear notch welded on the S10 from thats going under my 54 GMC.. Made the cab mounts last night... Ready to start swapping the body over...

redsled04 · 09-23-2009, 11:09 PM

Quote:

Originally Posted by c10addict

Got the rear notch welded on the S10 from thats going under my 54 GMC.. Made the cab mounts last night... Ready to start swapping the body over...

Looks like an Ekstisive kit.I have one on my 88 fullsize.

c10addict · 09-23-2009, 11:30 PM

Quote:

Originally Posted by redsled04

Looks like an Ekstisive kit.I have one on my 88 fullsize.

you are correct... can't beat it for the money

09-19-2009, 03:27 PM	#27
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: time to get stoked!!! My 72 laid out and my 56 finally on the road...... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-20-2009, 11:30 AM	#28
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: time to get stoked!!! Heres two pics that i am really proud of. I really like the headers because that was my first try at building headers. Great job everyone on there projects!!! They look great!!! Attached Images __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

09-20-2009, 11:39 AM	#29
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: time to get stoked!!! To quote singer "Jordan Sparks" and one of her hits "No Air" She recently hit roller status w/ PorterBuilt Arms __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-20-2009, 11:47 AM	#30
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: time to get stoked!!! Since the current theme seems to rolling chassis, figured I might as well post up. __________________ 78 Build Thread 4Runner Build

09-20-2009, 12:27 PM	#31
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: time to get stoked!!! looks awesome chuck ... what brand/type are those mufflers?

09-20-2009, 01:11 PM	#33
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: time to get stoked!!! Thanks for the info ... can you tell me what length they are?

09-20-2009, 02:24 PM	#35
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: time to get stoked!!! I think that'll do it ... Aweseome! Thanks! Rep points to you!

09-20-2009, 04:21 PM	#36
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: time to get stoked!!! I am Stoked! Finally got the Boss 338 wheel mystery figured out. Look here: http://67-72chevytrucks.com/vboard/s...352320&page=12 __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

09-20-2009, 06:36 PM	#37
fiddy9apache Registered User Join Date: Aug 2009 Location: ftw tex Posts: 682	Re: time to get stoked!!! my 59, i dont drive as much as i should...

09-20-2009, 07:13 PM	#38
bludshaker Registered User Join Date: Apr 2006 Location: The Burg, Fl Posts: 8	Re: time to get stoked!!! I love that Apache! Nice ride homie!:

09-20-2009, 07:47 PM	#40
redsled04 Registered User Join Date: Nov 2007 Location: Maple valley WA. Posts: 128	Re: time to get stoked!!! My ladies Sonoma I started on last week.All Kp Compnents of course.And 4 Viair 380's.Im Setting it up to lay frame on 20 and 22's. Last edited by redsled04; 09-21-2009 at 09:45 PM.

09-21-2009, 02:31 PM	#41
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: time to get stoked!!! With the help of lolife99, we gave my '69 an attitude adjustment... 4.5/6" ECE drop, with 6-lug disc brake upgrade: Also with the help of lolife99 and hot trux, I was able to correct the front track width with a set of hard to find 15x7 6-lug rally wheels: __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-23-2009, 10:21 AM	#42
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: time to get stoked!!! Got the rear notch welded on the S10 from thats going under my 54 GMC.. Made the cab mounts last night... Ready to start swapping the body over... Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.