VA VERY nice Van Tilt with cruise - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 10-09-2009, 02:15 AM

Got this as a partial trade for some parts I was selling. Now selling due to job loss.

VERY nice condition van tilt. Not a truck tilt but can be used with slight modifications. Or can be sent to a vendor on here and be converted to truck tilt specs. This one should be put right in the truck with the minor mods because it's so nice. Short lever for shifter. Paint is good, all the internals look new, levers are nice, tilt is very tight, turn signal cam cancels. Top notch unit!!!

200 PLUS Shipping. This is the nicest one I have seen. they sell here for 150 in much worse condition.

Here is the thread on rebuilding them (450 rebuilt...this one doesn't need rebuilding)
http://67-72chevytrucks.com/vboard/s...d.php?t=328775

Pictures of the tilt.

VA72C10 · 10-09-2009, 12:30 PM

ttt

Dasani · 10-09-2009, 02:01 PM

Quote:

Originally Posted by VA72C10

ttt

That's a great price!

VA72C10 · 10-09-2009, 09:18 PM

Quote:

Originally Posted by Dasani

That's a great price!

Thanks, I think so too

Hottrucks · 10-09-2009, 10:26 PM

what mods have to be made to make it work?? or is it plug and play on the electric??

VA72C10 · 10-09-2009, 11:29 PM

They make an adapter

You can get them at parts stores or online.

VA72C10 · 10-09-2009, 11:32 PM

Then from what I understand you have to at least shorten the shaft in the engine bay or it will stick out too far. I am not 100% sure on any other required modifications...but there are a lot of posts on here about them.

solidaxel · 10-12-2009, 12:12 AM

What is the length from the steering wheel flange to the end of the tube

VA72C10 · 10-12-2009, 12:17 AM

Are you wanting from where the back of the wheel would be at (top of the column not counting the bolt) down to the tube itself or to the end of the shaft?

VA72C10 · 10-12-2009, 12:35 AM

From the top of the column body to the bottom of the body is 32 3/4. I measured my stock automatic (non-tilt) column and it was 32 1/2" However, it's the mounting point that's different. Where the stock column has the fitting to accept the shaft with the ragjoint fitting on the bottom, this has the ragjoint fitting built in on a shaft that is in the column itself.

VA72C10 · 10-15-2009, 10:37 AM

Still available

short-t · 10-15-2009, 11:37 AM

Will you ship to Canada?? If so please get me a quote thru usps to T1Y 1Y2

Thanks,
Greg

VA72C10 · 10-15-2009, 12:03 PM

Quote:

Originally Posted by short-t

Will you ship to Canada?? If so please get me a quote thru usps to T1Y 1Y2

Thanks,
Greg

I'll work on a quote for you.

VA72C10 · 10-15-2009, 10:16 PM

I will take the tilt to the post office tomorrow for a firm quote but looks to be around 50.

short-t · 10-16-2009, 09:52 AM

Hey VA72C10,

Sorry but I am going to pass, hope I caught you before going to the post office.

VA72C10 · 10-16-2009, 11:11 AM

Yep, thanks for the heads up.

VA72C10 · 10-17-2009, 01:35 AM

ttt

VA72C10 · 10-19-2009, 12:02 AM

ttt

brian mac · 10-21-2009, 10:29 AM

Is the tilt still available?

VA72C10 · 10-21-2009, 05:13 PM

yes...still available.

VA72C10 · 10-22-2009, 09:52 AM

ttt

VA72C10 · 10-22-2009, 06:40 PM

ttt

VA72C10 · 10-22-2009, 10:52 PM

ttt

VA72C10 · 10-23-2009, 05:27 PM

ttt

VA72C10 · 10-24-2009, 08:48 AM

ttt

10-09-2009, 02:15 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	VERY nice Van Tilt with cruise Got this as a partial trade for some parts I was selling. Now selling due to job loss. VERY nice condition van tilt. Not a truck tilt but can be used with slight modifications. Or can be sent to a vendor on here and be converted to truck tilt specs. This one should be put right in the truck with the minor mods because it's so nice. Short lever for shifter. Paint is good, all the internals look new, levers are nice, tilt is very tight, turn signal cam cancels. Top notch unit!!! 200 PLUS Shipping. This is the nicest one I have seen. they sell here for 150 in much worse condition. Here is the thread on rebuilding them (450 rebuilt...this one doesn't need rebuilding) http://67-72chevytrucks.com/vboard/s...d.php?t=328775 Pictures of the tilt. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-09-2009, 12:30 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-09-2009, 10:26 PM	#5
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: VERY nice Van Tilt with cruise what mods have to be made to make it work?? or is it plug and play on the electric?? __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

10-09-2009, 11:29 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise They make an adapter You can get them at parts stores or online. __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 10-09-2009 at 11:31 PM.

10-09-2009, 11:32 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise Then from what I understand you have to at least shorten the shaft in the engine bay or it will stick out too far. I am not 100% sure on any other required modifications...but there are a lot of posts on here about them. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-12-2009, 12:12 AM	#8
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: VERY nice Van Tilt with cruise What is the length from the steering wheel flange to the end of the tube __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

10-12-2009, 12:17 AM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise Are you wanting from where the back of the wheel would be at (top of the column not counting the bolt) down to the tube itself or to the end of the shaft? __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-12-2009, 12:35 AM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise From the top of the column body to the bottom of the body is 32 3/4. I measured my stock automatic (non-tilt) column and it was 32 1/2" However, it's the mounting point that's different. Where the stock column has the fitting to accept the shaft with the ragjoint fitting on the bottom, this has the ragjoint fitting built in on a shaft that is in the column itself. __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 10-12-2009 at 12:36 AM.

10-15-2009, 10:37 AM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise Still available __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-15-2009, 11:37 AM	#12
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 325	Re: VERY nice Van Tilt with cruise Will you ship to Canada?? If so please get me a quote thru usps to T1Y 1Y2 Thanks, Greg

10-15-2009, 10:16 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise I will take the tilt to the post office tomorrow for a firm quote but looks to be around 50. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-16-2009, 09:52 AM	#15
short-t Registered User Join Date: Mar 2008 Location: Calgary, ab Posts: 325	Re: VERY nice Van Tilt with cruise Hey VA72C10, Sorry but I am going to pass, hope I caught you before going to the post office.

10-16-2009, 11:11 AM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise Yep, thanks for the heads up. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-17-2009, 01:35 AM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-19-2009, 12:02 AM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

10-21-2009, 10:29 AM	#19
brian mac Registered User Join Date: Dec 2008 Location: eufaula,alabama Posts: 198	Re: VERY nice Van Tilt with cruise Is the tilt still available?

10-21-2009, 05:13 PM	#20
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise yes...still available. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-22-2009, 09:52 AM	#21
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-22-2009, 06:40 PM	#22
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-22-2009, 10:52 PM	#23
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-23-2009, 05:27 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-24-2009, 08:48 AM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: VERY nice Van Tilt with cruise ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.