motor mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Terry33 · 10-20-2009, 01:43 PM

i have a 67 chevy c10 and it had a 292 inline 6, does anyone know if those motor mounts will work on with a 350?
thanks

69 longhorn · 10-20-2009, 02:06 PM

The dr side stand will work, but you need to swap the pass side stand for an I 250 stand(this will give a little engine setback , with no driveline mods.....using the original driveline). Or you can swap in the factory sb stands, & set the engine in (factory) sb V8 position. crazyAl

10-20-2009, 01:43 PM	#1
Terry33 Registered User Join Date: May 2008 Location: Tucson, AZ Posts: 3	motor mounts i have a 67 chevy c10 and it had a 292 inline 6, does anyone know if those motor mounts will work on with a 350? thanks

10-20-2009, 02:06 PM	#2
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	Re: motor mounts The dr side stand will work, but you need to swap the pass side stand for an I 250 stand(this will give a little engine setback , with no driveline mods.....using the original driveline). Or you can swap in the factory sb stands, & set the engine in (factory) sb V8 position. crazyAl __________________ http://community.webshots.com/user/hotrodhorn

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.