Question about clearance issue - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SnS C10 · 10-23-2009, 10:30 PM

i have a 79 2wd blazer. not sure but i think it has drop spindles on the front. the tires in front are about 3 1/4" front the top if the INNER fenderwell not the outer fender lip. if i cut 1 coil off, will i have a clearance issue with the tire hitting the inner fenderwell or will it still roll and drive ok besides the stiffer front end? thanks for the help

tvblazer78 · 10-24-2009, 08:27 AM

Ya you will rub if you hit a big bump if you go any lower..

SnS C10 · 10-24-2009, 12:48 PM

how about if i remove the inner fender?

tvblazer78 · 10-24-2009, 10:33 PM

Quote:

Originally Posted by Shaun23a11en

how about if i remove the inner fender?

If you did that it can go lower then. You can always put air bags on it..

10-23-2009, 10:30 PM	#1
SnS C10 Registered User Join Date: Jul 2004 Location: Lomita, Ca Posts: 1,225	Question about clearance issue i have a 79 2wd blazer. not sure but i think it has drop spindles on the front. the tires in front are about 3 1/4" front the top if the INNER fenderwell not the outer fender lip. if i cut 1 coil off, will i have a clearance issue with the tire hitting the inner fenderwell or will it still roll and drive ok besides the stiffer front end? thanks for the help

10-24-2009, 08:27 AM	#2
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Question about clearance issue Ya you will rub if you hit a big bump if you go any lower.. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

10-24-2009, 12:48 PM	#3
SnS C10 Registered User Join Date: Jul 2004 Location: Lomita, Ca Posts: 1,225	Re: Question about clearance issue how about if i remove the inner fender?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.