How about some pics of High Performance haulers. - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dave brode · 11-16-2009, 12:29 PM

1st engine pic is a mostly stock 87 octane 500 cadillac, went 12.97 at 100. 2nd engine pic is current engine, although it has a 4781 holly and hei now, went 11.66 at 113.96 so far. Welded valve covers were req'd due to firewall clearance issues and shaft roller.

3rd engine pic is a twin turbo'd engine that I ran two years ago. Turbocharger were too small and it didn't run like I wanted, so it was sold.

Dave

CoggedBelt75 · 11-16-2009, 11:17 PM

Dave, love the looks of your truck!!

CoggedBelt75 · 11-16-2009, 11:30 PM

Have already posted in the '73-'87 section, but thought I would put them here also. Been running without a hood for a long time and finally had it cut and the injector plate and hat spaced 2" for better exposure. No track times, no dyno numbers, just my daily cruiser....

dave brode · 11-16-2009, 11:44 PM

Quote:

Originally Posted by CoggedBelt75

Dave, love the looks of your truck!!

Thanks, Joe. Mine's a good 20 footer. Yours looks good. I pity those street radials.

Dave

**Hart_Rod** · 11-17-2009, 12:29 AM

Quote:

Originally Posted by CoggedBelt75

Have already posted in the '73-'87 section, but thought I would put them here also. Been running without a hood for a long time and finally had it cut and the injector plate and hat spaced 2" for better exposure. No track times, no dyno numbers, just my daily cruiser....

Sweet truck! Square bodies with fat tires rock,

.

paul1969 · 11-29-2009, 04:25 AM

took it to the track a week ago and stunk the place up bad track horrible air couldnt get it to hook so went home. only thing worth anything was it went 105mph in the 1/8th from half track which is when it finally hooked up.

dj how the beast comin along

red rumbler · 11-29-2009, 12:46 PM

Quote:

Originally Posted by KQQL IT

Hoosiers 1.671 60 ft

nice truck what rear tires are you running?

red rumbler · 11-29-2009, 12:53 PM

hey coggedbelt75 that is a beautiful truck almost everything i want to do to mine. how does the stroker like the blower?

CoggedBelt75 · 11-29-2009, 02:52 PM

Paul1969, now that's what I'm talkin' about!!! Very nice stepside!!

Quote:

hey coggedbelt75 that is a beautiful truck almost everything i want to do to mine. how does the stroker like the blower?

I think they compliment each other rather well.

1Bad62Pro/Street · 11-29-2009, 04:54 PM

Quote:

Originally Posted by paul1969

took it to the track a week ago and stunk the place up bad track horrible air couldnt get it to hook so went home. only thing worth anything was it went 105mph in the 1/8th from half track which is when it finally hooked up.

dj how the beast comin along

Do you have a picture of your bed? The Tubs?

paul1969 · 11-29-2009, 05:44 PM

heres a few hope it helps

1Bad62Pro/Street · 11-29-2009, 05:53 PM

Thanks!

djracer · 11-29-2009, 07:32 PM

Paul1969 sweet truck. Good luck getting her sorted out. My progress is slow but i'm gonna start pushing some of my help to get things rolling along.

Ont67shortbox · 12-04-2009, 04:49 PM

Here is mine, had it out 3 times this fall. Best time so far was 1.72 60 foot ,12.72 @105 still tuning suspension and engine,hoping for 11.9x in the spring.

drag_72 · 12-04-2009, 07:28 PM

hey 67shortbox.... what size motor and power you got?

djracer · 12-04-2009, 07:29 PM

cool truck what's done to the motor?

Ont67shortbox · 12-05-2009, 09:25 AM

.030 over 427 (431) cast crank ,forged TRW pistons,approx 10.7-1,241 Casting heads 113cc with 2.30/188 valves.Comp 282s solid ft cam .244/252@.050 590/598 lift,RPM intake ,750 df/dp holley,2 inch Hooker Comp headers 2455-3 black ceramic coated, 350 turbo trans,too small of convertor lol and a 12 bolt posi with 3.73s. Over winter I am changing the springs and shocks front and rear,adding an air bag on the pass side,convertor and hopefully going to a 9 inch F**d rear. Works pretty good now considering it isn't even broke in yet, but there is alot more left,just need to tune the suspension and engine. Brian

69trk · 12-05-2009, 10:13 AM

nice truck. I have a 431 also

drag_72 · 12-07-2009, 02:26 AM

what kinda power you makin shortbox?

KQQL IT · 12-07-2009, 03:00 AM

Quote:

Originally Posted by red rumbler

nice truck what rear tires are you running?

Sorry I just saw the post ADD gets me sometimes any waya hoosier drag radials 325/50-15 on a 10" wheel i need to screw them to the wheel. But...

Ont67shortbox · 12-07-2009, 03:51 PM

Quote:

Originally Posted by drag_72

what kinda power you makin shortbox?

The engine is fresh,so once it is broken in I may put it on a chassis dyno just to see.I would estimate around 475 to the crank.It was built with parts I had accumulated over the years. I run Nostalgia drags and wanted to keep it some what period correct (427),next time may be a 496/540 with 427 decals lol,Brian

bigboybodry · 12-07-2009, 04:33 PM

here is my bucket of bolts still down. putting the engine back together this week hope to have it in this weekend then comes rewiring the hole truck for 2kits etc....

68 C-10 KID · 12-07-2009, 11:26 PM

Quote:

Originally Posted by bigboybodry

here is my bucket of bolts still down. putting the engine back together this week hope to have it in this weekend then comes rewiring the hole truck for 2kits etc....

That and some tuff guy bars running all over.

bigboybodry · 12-08-2009, 09:57 AM

Quote:

Originally Posted by 68 C-10 KID

That and some tuff guy bars running all over.

that is in the makes also. the chassis man wants everything in the truck so we can do all the suspension and rollcage at one time. i am just ready to ride out. this has been a long time coming and i have been looking/gathering parts for a little over a year now.here is the pics. of the new bbc 512 and th400 trans.

68 C-10 KID · 12-08-2009, 11:14 PM

Quote:

Originally Posted by bigboybodry

that is in the makes also. the chassis man wants everything in the truck so we can do all the suspension and rollcage at one time. i am just ready to ride out. this has been a long time coming and i have been looking/gathering parts for a little over a year now.here is the pics. of the new bbc 512 and th400 trans.

Sweet deal. Some one might have to get a competition license.

I have the same intake in the sbc. Damn 2 systems. So what size of hits are you running?

11-16-2009, 12:29 PM	#226
dave brode Registered User Join Date: Jun 2008 Location: Frostburg, Maryland Posts: 38	Re: How about some pics of High Performance haulers. 1st engine pic is a mostly stock 87 octane 500 cadillac, went 12.97 at 100. 2nd engine pic is current engine, although it has a 4781 holly and hei now, went 11.66 at 113.96 so far. Welded valve covers were req'd due to firewall clearance issues and shaft roller. 3rd engine pic is a twin turbo'd engine that I ran two years ago. Turbocharger were too small and it didn't run like I wanted, so it was sold. Dave Attached Images __________________ '71 C-10 medium bed. Pump gas 454" +.030", stock valved 049s, dana 60 w/410s. 12.25 at 108. Last edited by dave brode; 11-22-2009 at 06:29 PM. Reason: new track best

11-16-2009, 11:17 PM	#227
CoggedBelt75 Registered User Join Date: Nov 2008 Location: Altus, Oklahoma Posts: 679	Re: How about some pics of High Performance haulers. Dave, love the looks of your truck!! __________________ Joe __________________________________________ 1975 C10 "Questions are a sign of intelligence indicating a desire to eliminate ignorance"

11-16-2009, 11:30 PM	#228
CoggedBelt75 Registered User Join Date: Nov 2008 Location: Altus, Oklahoma Posts: 679	Re: How about some pics of High Performance haulers. Have already posted in the '73-'87 section, but thought I would put them here also. Been running without a hood for a long time and finally had it cut and the injector plate and hat spaced 2" for better exposure. No track times, no dyno numbers, just my daily cruiser.... Attached Images __________________ Joe __________________________________________ 1975 C10 "Questions are a sign of intelligence indicating a desire to eliminate ignorance"

11-29-2009, 04:25 AM	#231
paul1969 Registered User Join Date: Jul 2009 Location: spring,tx Posts: 17	Re: How about some pics of High Performance haulers. took it to the track a week ago and stunk the place up bad track horrible air couldnt get it to hook so went home. only thing worth anything was it went 105mph in the 1/8th from half track which is when it finally hooked up. dj how the beast comin along __________________ 69 stepside 489ci 60ft---- 1.46 660ft--- 6.570@105.95 1320ft-- 10.37@127.01

11-29-2009, 12:53 PM	#233
red rumbler Registered User Join Date: Oct 2009 Location: stouffville ontario Posts: 166	Re: How about some pics of High Performance haulers. hey coggedbelt75 that is a beautiful truck almost everything i want to do to mine. how does the stroker like the blower?

11-29-2009, 05:44 PM	#236
paul1969 Registered User Join Date: Jul 2009 Location: spring,tx Posts: 17	Re: How about some pics of High Performance haulers. heres a few hope it helps __________________ 69 stepside 489ci 60ft---- 1.46 660ft--- 6.570@105.95 1320ft-- 10.37@127.01 Last edited by paul1969; 11-29-2009 at 05:45 PM.

11-29-2009, 05:53 PM	#237
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: How about some pics of High Performance haulers. Thanks! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-29-2009, 07:32 PM	#238
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: How about some pics of High Performance haulers. Paul1969 sweet truck. Good luck getting her sorted out. My progress is slow but i'm gonna start pushing some of my help to get things rolling along. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-04-2009, 04:49 PM	#239
Ont67shortbox Registered User Join Date: May 2003 Location: Ontario Posts: 279	Re: How about some pics of High Performance haulers. Here is mine, had it out 3 times this fall. Best time so far was 1.72 60 foot ,12.72 @105 still tuning suspension and engine,hoping for 11.9x in the spring. Attached Images

12-04-2009, 07:28 PM	#240
drag_72 Ready to go fast!! Join Date: Aug 2008 Location: Carthage,Mo Posts: 219	Re: How about some pics of High Performance haulers. hey 67shortbox.... what size motor and power you got? __________________ 454 block .30 forged aluminum pistons steel crank valve job Holley Strip Dominator intake 1030cfm holley carb, 250 plate shot roller rockers Erson Solid cam split duration 307/310. .575/.595 lift milodon oil pan fab. aluminum valve covers 4 bolt main splayed anodized caps all studded

12-04-2009, 07:29 PM	#241
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: How about some pics of High Performance haulers. cool truck what's done to the motor? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-05-2009, 09:25 AM	#242
Ont67shortbox Registered User Join Date: May 2003 Location: Ontario Posts: 279	Re: How about some pics of High Performance haulers. .030 over 427 (431) cast crank ,forged TRW pistons,approx 10.7-1,241 Casting heads 113cc with 2.30/188 valves.Comp 282s solid ft cam .244/252@.050 590/598 lift,RPM intake ,750 df/dp holley,2 inch Hooker Comp headers 2455-3 black ceramic coated, 350 turbo trans,too small of convertor lol and a 12 bolt posi with 3.73s. Over winter I am changing the springs and shocks front and rear,adding an air bag on the pass side,convertor and hopefully going to a 9 inch F**d rear. Works pretty good now considering it isn't even broke in yet, but there is alot more left,just need to tune the suspension and engine. Brian

12-05-2009, 10:13 AM	#243
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: How about some pics of High Performance haulers. nice truck. I have a 431 also __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

12-07-2009, 02:26 AM	#244
drag_72 Ready to go fast!! Join Date: Aug 2008 Location: Carthage,Mo Posts: 219	Re: How about some pics of High Performance haulers. what kinda power you makin shortbox? __________________ 454 block .30 forged aluminum pistons steel crank valve job Holley Strip Dominator intake 1030cfm holley carb, 250 plate shot roller rockers Erson Solid cam split duration 307/310. .575/.595 lift milodon oil pan fab. aluminum valve covers 4 bolt main splayed anodized caps all studded

12-07-2009, 04:33 PM	#247
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: How about some pics of High Performance haulers. here is my bucket of bolts still down. putting the engine back together this week hope to have it in this weekend then comes rewiring the hole truck for 2kits etc.... __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ Last edited by bigboybodry; 12-10-2009 at 06:36 PM.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.