RHS BBC Heads?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shawnt · 12-13-2009, 01:48 PM

Anyone here use a set of Racing Head Service bbc heads or have in the past? I am n on buying a set but don't know much about them. Thanks.

ripdog28 · 12-13-2009, 03:59 PM

I have seen a few companies that use them and build some stout motors. I have only heard good stuff about RHS.

shawnt · 12-13-2009, 05:13 PM

Thanks rip! I just keep seeing these ads everywhere and i didnt know whether they were legit or not. I'm thinking about getting a set for the big block because i don't wanna spend the extra money atm for brodix, dart, or afr. Still debating though.

Alex1 · 12-13-2009, 05:29 PM

RHS = CompCams

It's good stuff.

swb85 · 12-13-2009, 06:47 PM

Agreed....RHS makes great stuff. Pretty easy to squeeze 650hp out of a 454 with a set of their bbc heads.

shawnt · 12-14-2009, 03:38 AM

swb you just put a big SEG on my face. I likes the 650hp. Didn't know CompCams made RHS. I think i'll try a set but it's gonna be awhile. I come back from Iraq in late June so

. I just need something to make the ole pickup outrun my paw's camaro's. Doubt i can though. The 96 runs 6's in the 1/8 and the 79 runs low 7's. Maybe a little juice will get me there lol. Thanks for the help. Still open for more suggestions or advice.

**Captainfab** · 12-15-2009, 12:20 AM

Your sig says "Debating on building a 396" I would go with a 454 if you're wanting some go fast power. A 454 will make more torque which is what it takes to get a heavy truck moving. Top that with some RHS heads and as swb85 said, an easy 650hp.

Stay safe over there and thanks for your service

Quote:

Originally Posted by shawnt

swb you just put a big SEG on my face. I likes the 650hp. Didn't know CompCams made RHS. I think i'll try a set but it's gonna be awhile. I come back from Iraq in late June so

. I just need something to make the ole pickup outrun my paw's camaro's. Doubt i can though. The 96 runs 6's in the 1/8 and the 79 runs low 7's. Maybe a little juice will get me there lol. Thanks for the help. Still open for more suggestions or advice.

ripdog28 · 12-15-2009, 01:50 AM

Hell, i have Dart heads (just as good or better) with a very tame cam and am pushing 500 ftlbs at about 3300 rpms.

shawnt · 12-15-2009, 03:12 AM

yeah, my sig does say "debating on building a 396" but i havent changed it in a while lol. i just bought a 454 not long ago and had my dad pick it up. and to you who said "thank you for your service" i say "thank you for your support"

djracer · 12-15-2009, 03:07 PM

Are the RHS heads aluminum? If not You might want to look at the patriots. My buddy has a pretty stout 489 with patriot aluminum heads. On a truck you really need to lose that weight off the nose.

Be safe and thanks again for what you do.

shawnt · 12-15-2009, 03:28 PM

Okay, i'll look around for some patriots also. I bought my wife a 50" TV, $1000 worth of clothes, and a necklace for christmas... all because i'll have something to hold against her when i get ready to build the 454

maybe she'll find it in her heart to let me go crazy but i doubt it

ulakovic22 · 12-17-2009, 03:59 PM

I have RHS heads on my BBC, but it hasn't started yet. Here are some real pics for you.

ulakovic22 · 12-17-2009, 04:02 PM

Here are some ported pics and flow numbers also because I like showing off

Hezie · 12-26-2009, 06:41 PM

I have a set on a 496.The engine I was coping made 625 and I can get about 10.5 mpg on a good day . Thank you for your service.
Name: IMG_3058.jpg
Views: 659
Size: 74.5 KB

Name: IMG_3058.jpg
Views: 659
Size: 74.5 KB

Name: IMG_3848-b.JPG
Views: 831
Size: 89.5 KB

djracer · 12-27-2009, 12:31 AM

Sweet truck Hezie

mbgmike · 12-27-2009, 07:54 PM

This one is putting out 1100hp it has RHS heads.
uses 15 gallons to go 24miles plus a little more.

midevil1 · 02-22-2010, 09:49 PM

I have a 505 with RHS heads. Hyd roller cam, 10 to 1, 93 octane. It made 668hp and 611tq. 6400rpms and 4400 rpms. They are unported.

Alex1 · 02-23-2010, 10:48 AM

Quote:

Originally Posted by midevil1

I have a 505 with RHS heads. Hyd roller cam, 10 to 1, 93 octane. It made 668hp and 611tq. 6400rpms and 4400 rpms. They are unported.

Great numbers!

midevil1 · 02-23-2010, 11:55 AM

Quote:

Originally Posted by Alex1

Great numbers!

Pat Musi spec cam probably has alot to do with it. I can give build specs to anyone who wants to duplicate. 100% streetable motor.

ulakovic22 · 04-09-2010, 04:06 PM

Quote:

Originally Posted by midevil1

Pat Musi spec cam probably has alot to do with it. I can give build specs to anyone who wants to duplicate. 100% streetable motor.

I would be interested to see the cam specs to compare to mine and see where I might end up.

Edit: As cast 320's?

midevil1 · 04-09-2010, 08:43 PM

Quote:

Originally Posted by ulakovic22

I would be interested to see the cam specs to compare to mine and see where I might end up.

Edit: As cast 320's?

Just port matched to gaskets. CAM SPECS are as follows:

Duration: Int. 308 Exh. 315
Lift: Int. 662 Exh. 688
Centerline. Int. 109 Exh. 114
Lobe sep. 112*

10.5 to 1 compression
DART Single Plane
1000cfm Demon
2.25 headers with 3.5 mufflers

12-13-2009, 01:48 PM	#1
shawnt Registered User Join Date: Sep 2008 Location: sulphur springs texas Posts: 141	RHS BBC Heads?? Anyone here use a set of Racing Head Service bbc heads or have in the past? I am n on buying a set but don't know much about them. Thanks. __________________ Shawn 85 SWB 7.39 @ 93 Best so far with 0 tuning Lesson in life: Never fry bacon naked!

12-13-2009, 03:59 PM	#2
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: RHS BBC Heads?? I have seen a few companies that use them and build some stout motors. I have only heard good stuff about RHS. __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

12-13-2009, 05:13 PM	#3
shawnt Registered User Join Date: Sep 2008 Location: sulphur springs texas Posts: 141	Re: RHS BBC Heads?? Thanks rip! I just keep seeing these ads everywhere and i didnt know whether they were legit or not. I'm thinking about getting a set for the big block because i don't wanna spend the extra money atm for brodix, dart, or afr. Still debating though. __________________ Shawn 85 SWB 7.39 @ 93 Best so far with 0 tuning Lesson in life: Never fry bacon naked!

12-13-2009, 05:29 PM	#4
Alex1 Registered User Join Date: Jul 2007 Location: Ottawa Ontario Canada Posts: 1,156	Re: RHS BBC Heads?? RHS = CompCams It's good stuff.

12-13-2009, 06:47 PM	#5
swb85 On a budget like Fred Sanford Join Date: Oct 2005 Location: Topeka, KS Posts: 2,031	Re: RHS BBC Heads?? Agreed....RHS makes great stuff. Pretty easy to squeeze 650hp out of a 454 with a set of their bbc heads. __________________ '85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD

12-14-2009, 03:38 AM	#6
shawnt Registered User Join Date: Sep 2008 Location: sulphur springs texas Posts: 141	Re: RHS BBC Heads?? swb you just put a big SEG on my face. I likes the 650hp. Didn't know CompCams made RHS. I think i'll try a set but it's gonna be awhile. I come back from Iraq in late June so . I just need something to make the ole pickup outrun my paw's camaro's. Doubt i can though. The 96 runs 6's in the 1/8 and the 79 runs low 7's. Maybe a little juice will get me there lol. Thanks for the help. Still open for more suggestions or advice. __________________ Shawn 85 SWB 7.39 @ 93 Best so far with 0 tuning Lesson in life: Never fry bacon naked!

12-15-2009, 01:50 AM	#8
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: RHS BBC Heads?? Hell, i have Dart heads (just as good or better) with a very tame cam and am pushing 500 ftlbs at about 3300 rpms. __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

12-15-2009, 03:12 AM	#9
shawnt Registered User Join Date: Sep 2008 Location: sulphur springs texas Posts: 141	Re: RHS BBC Heads?? yeah, my sig does say "debating on building a 396" but i havent changed it in a while lol. i just bought a 454 not long ago and had my dad pick it up. and to you who said "thank you for your service" i say "thank you for your support" __________________ Shawn 85 SWB 7.39 @ 93 Best so far with 0 tuning Lesson in life: Never fry bacon naked!

12-15-2009, 03:07 PM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: RHS BBC Heads?? Are the RHS heads aluminum? If not You might want to look at the patriots. My buddy has a pretty stout 489 with patriot aluminum heads. On a truck you really need to lose that weight off the nose. Be safe and thanks again for what you do. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-15-2009, 03:28 PM	#11
shawnt Registered User Join Date: Sep 2008 Location: sulphur springs texas Posts: 141	Re: RHS BBC Heads?? Okay, i'll look around for some patriots also. I bought my wife a 50" TV, $1000 worth of clothes, and a necklace for christmas... all because i'll have something to hold against her when i get ready to build the 454 maybe she'll find it in her heart to let me go crazy but i doubt it __________________ Shawn 85 SWB 7.39 @ 93 Best so far with 0 tuning Lesson in life: Never fry bacon naked!

12-17-2009, 03:59 PM	#12
ulakovic22 Registered User Join Date: Aug 2008 Location: Lantana, TX Posts: 419	Re: RHS BBC Heads?? I have RHS heads on my BBC, but it hasn't started yet. Here are some real pics for you.

12-17-2009, 04:02 PM	#13
ulakovic22 Registered User Join Date: Aug 2008 Location: Lantana, TX Posts: 419	Re: RHS BBC Heads?? Here are some ported pics and flow numbers also because I like showing off

12-26-2009, 06:41 PM	#14
Hezie Registered User Join Date: Nov 2009 Location: Dahlonega Ga. Posts: 137	Re: RHS BBC Heads?? I have a set on a 496.The engine I was coping made 625 and I can get about 10.5 mpg on a good day . Thank you for your service. __________________ Hezie My Build http://67-72chevytrucks.com/vboard/s...d.php?t=375244

12-27-2009, 12:31 AM	#15
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: RHS BBC Heads?? Sweet truck Hezie __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-27-2009, 07:54 PM	#16
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: RHS BBC Heads?? This one is putting out 1100hp it has RHS heads. uses 15 gallons to go 24miles plus a little more. Attached Images Last edited by mbgmike; 12-27-2009 at 07:56 PM.



Register or Log In To remove these advertisements.

02-22-2010, 09:49 PM	#17
midevil1 ShortBus KingPin Join Date: Feb 2010 Location: houston texas Posts: 146	Re: RHS BBC Heads?? I have a 505 with RHS heads. Hyd roller cam, 10 to 1, 93 octane. It made 668hp and 611tq. 6400rpms and 4400 rpms. They are unported. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.