|
01-10-2010, 05:28 PM
|
#1 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
New Truck - wheeling and dealing
So some of you may have remembered awhile ago that I was looking at getting a crewcab swb truck and I was going to trade it for my standard cab swb...well in order to do that trade, I wanted to keep my diesel, 700r4, A/C, and some other things...well, it was just too much work to do in a short amount of time and I wouldn't have a second vehicle or a truck for a while...and my wife is due in March with our little boy, so a second vehicle is necessary right now with all the dr.s appointments she has...well, the guy came over to the house today and asked what I wanted to do, and I told him that I didn't want to trade for my truck and asked what he wanted for his truck...well, we came up with a price and I told him I had a mustang notch for sale, so he went and looked at it...well, long story short, the mustang is gone and the ccswb is sitting in my yard now...lol...I love it...so anyways, tell me what you think about the trade...oh yeah and the mustang was only a 4 cylinder 5 speed car...
here's pictures of the crew cab...then of the mustang... Last edited by Stitch; 01-11-2010 at 08:32 AM. |
|
|
|
01-10-2010, 05:31 PM
|
#2 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
more pics...
|
|
|
|
|
01-10-2010, 05:32 PM
|
#3 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
and more...
|
|
|
|
|
01-10-2010, 05:33 PM
|
#4 |
|
6.0 powered square
Join Date: Feb 2008
Location: Mesquite texas
Posts: 3,459
|
Re: Wheeling and Dealing
What did the mustang look like
__________________
Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 |
|
|
|
|
01-10-2010, 05:33 PM
|
#5 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
yep more...
|
|
|
|
|
01-10-2010, 05:34 PM
|
#6 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
still more...
|
|
|
|
|
01-10-2010, 05:35 PM
|
#7 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
last of the truck...
|
|
|
|
|
01-10-2010, 05:37 PM
|
#8 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
and here's the mustang...
Last edited by Stitch; 01-10-2010 at 05:38 PM. |
|
|
|
|
01-10-2010, 05:39 PM
|
#9 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
more notch...
|
|
|
|
|
01-10-2010, 05:40 PM
|
#10 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
sorry so long, but I know yall like a good story and lots of pics...so there you go...tell me what ya think...
 and btw, mustang was only a 4 cylinder 5 speed car... Last edited by Stitch; 01-10-2010 at 05:40 PM. |
|
|
|
|
01-10-2010, 05:41 PM
|
#11 | |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
Quote:
|
|
|
|
|
|
01-10-2010, 05:46 PM
|
#12 |
|
6.0 powered square
Join Date: Feb 2008
Location: Mesquite texas
Posts: 3,459
|
Re: Wheeling and Dealing
you did good, are going keep the frame like that, my truck was cut like it
__________________
Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 |
|
|
|
|
01-10-2010, 05:52 PM
|
#13 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
I got a buddy that owns a metal fab shop...he's going to reinforce and box it in for me...this truck will be bagged and I'm going to do a street rod style interior in it...I run a custom auto interior shop so it won't be much of a problem...
and also, the 3/4 ton running gear that's under the crewcab is going to get swapped for the 1/2 ton running gear under my diesel... |
|
|
|
|
01-10-2010, 08:37 PM
|
#14 |
|
Registered User
Join Date: Jun 2004
Location: Spartanburg, SC
Posts: 1,963
|
Re: Wheeling and Dealing
I know thats not the prefered way to shorten one on this site. I did mine like that about 7 years ago now and have not had one single issue with it. Mine does have a plate on the inside of the rails to support it, but it is not boxed.
I have hauled gravel and two loads of lumber to build my porch in it since. There has been no cracking or anything around the welds. As long as there is good penetration around it, you will be fine. I would add a plate to the back though, and get the rust scuffed off and painted over soon. Dont let everyone here scare you into redoing it. Other than that I think you came out better in the deal. Good luck swapping everything over.
__________________
Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded  '03 burb. Family cruiser http://upstategmtrucks.com/ |
|
|
|
|
01-10-2010, 09:13 PM
|
#15 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
looking at the swap info here on the site, it'll be the control arms and everything attached to them and then the spring packs and the rear end...doesn't sound too rough...I'm going to rebuild the front end components with new ball joints and bushings and redo the brakes all the way around before I put them up under my diesel...
and about the frame...I know it's not the preferred method here, and it should last a long time the way it's done, but I'm gonna have two babies in this thing with me sometimes and I don't wanna take the chance...the bed's already off and it won't be nothing for me to load it up on a trailer and take it to my buddy's shop and have him plate it on the inside and if he wants he can box it up for me...I have to take it to him to weld in a c notch anyways, so I might as well have him do this too... Chuck. |
|
|
|
|
01-11-2010, 12:17 AM
|
#16 |
|
Registered User
Join Date: Nov 2000
Location: Ft. Mill, SC USA
Posts: 931
|
Re: Wheeling and Dealing
Chuck, I too think you got a good deal. That's a lot of truck for the money. Take care. David
__________________
PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD
|
|
|
|
|
01-11-2010, 12:19 AM
|
#17 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
thanks David...I thought you'd like that...
|
|
|
|
|
01-11-2010, 09:13 AM
|
#18 |
|
Registered User
Join Date: Sep 2009
Location: Duncan, Oklahoma
Posts: 65
|
Re: Wheeling and Dealing
You did good
|
|
|
|
|
01-11-2010, 10:07 AM
|
#19 |
|
Account Suspended
Join Date: Jun 2009
Location: kansas city Ks
Posts: 1,970
|
Re: Wheeling and Dealing
SWEET Truck man!!!!!!! What color are you going to paint it? What wheels? what's a hot rod interior look like in a beast of truck like that? lol
|
|
|
|
|
01-11-2010, 10:08 AM
|
#20 |
|
It followed me home?
Join Date: Mar 2003
Location: Yup
Posts: 5,751
|
Re: Wheeling and Dealing
I like the trade, you definitley got the better end of the deal
__________________
Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually |
|
|
|
|
01-11-2010, 07:28 PM
|
#21 | |||
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
Quote:
Quote:
Quote:
also, the exterior color is going to be orange and white two tone with dark and light two tone tan interior........or I'm going to do the truck all black epoxy primer on the outside, and I mean everything...grill, mirrors, bumpers, what they call murdered out...lol and if I do it black on the outside, the interior is going to be solid porno red...just don't know yet... Last edited by Stitch; 06-14-2010 at 09:15 PM. |
|||
|
|
|
|
01-11-2010, 07:44 PM
|
#22 |
|
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: Wheeling and Dealing
Nice trade!!
You done good!!!
__________________
 CHEVY ONLY
|
|
|
|
|
01-11-2010, 07:58 PM
|
#23 |
|
Account Suspended
Join Date: Jul 2008
Location: Where I come from, it's cornbread and chicken...
Posts: 3,122
|
Re: Wheeling and Dealing
thank you sir...
|
|
|
|
|
01-11-2010, 08:55 PM
|
#24 |
|
Still plays with trucks
Join Date: Jul 2009
Location: Spokane, WA
Posts: 3,556
|
Re: Wheeling and Dealing
You definitely got the better end of the deal.
I'd love to have a CCSB 4x4.
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars |
|
|
|
|
06-14-2010, 12:59 AM
|
#25 |
|
Account Suspended
 Join Date: Apr 2009
Location: lexington South Carolina
Posts: 2,124
|
Re: Wheeling and Dealing
any pics of it sitting in the back(up dates) ive been to your house a couple times and never look at it.please
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
