rear cab mounts

[jacobgiles]

will the rear cab mount rubber bushings for the 50-53 model trucks work when rebuilding the rear center cab mount on a 47-48 cab? or does anyone sell a bushing set specifically for the 47-48 cabs? thanks...

[mr48chev]

According to the catalog I have they are the same but I am not positive that is correct.

I can measure the new ones I have that haven't been installed yet that fit the side of the frame mounts and give you the measurements if that will help.

[jacobgiles]

that would be a big help. thanks!

[mr48chev]

On the rubber bushing

Od right at 7/8" with the half inch bolt in place

Id 1/2"

Depth to shoulder of bushing 1"

Total length of bushing 1-1/8"

All measurements taken with my dollar store plastic caliper.

[jacobgiles]

thank you! i am going to pull the mount off the bottom of the cab in the morning so i will be able to compare measurements.