1969 SuperBurb build-up (Bagged and Blown!) - Page 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**youngrodder** · 02-10-2010, 05:16 PM

Quote:

Originally Posted by 72BlckButy

What if you did it yourself?

I thought about that. I even contacted the powder coating place the Billet Specialties uses (Ironically called Coating Specialties) for their wheels, and they said they it could be done.

In the end, that is a lot of money for an experiment. I would want to make sure that it would turn out nice.

72BlckButy · 02-10-2010, 10:25 PM

I agree... there's a lot at stake for an experiment.

So Hart Rod, have you picked a wheel yet?

**Hart_Rod** · 02-11-2010, 12:18 AM

Quote:

Originally Posted by lolife99

Perfect!

Quote:

Originally Posted by kvn1011

I have to agree that is a nice wheel!

Quote:

Originally Posted by n2billet

Check your PM's

Quote:

Originally Posted by 72BlckButy

One of the best options IMO...

TOO MUCH PRESSURE!!!!!

Quote:

Originally Posted by GraybealGarage

Rob,

I would maybe think about a 255/40/20 up front. I think it would match better with the 295/40 out back. The 245/40 is just a hair too small. Otherwise the burb is looking great!

Jason

Done!!

Quote:

Originally Posted by youngrodder

I thought about that. I even contacted the powder coating place the Billet Specialties uses (Ironically called Coating Specialties) for their wheels, and they said they it could be done.

In the end, that is a lot of money for an experiment. I would want to make sure that it would turn out nice.

Agree....

Quote:

Originally Posted by 72BlckButy

So Hart Rod, have you picked a wheel yet?

Uhhmmm maybe,

. I started the installation of the 13" front rotors and modular spindles. Unfortunately, no good pictures to show because it's going to take me longer to clean up the paint shop "goo" than it is to install the brakes,

Frizzle Fry · 02-11-2010, 01:02 AM

I like the Billets too.

nickp51chevy · 02-11-2010, 02:02 AM

I know people say it a lot, but I did just go though the whole thread, and all's I can say is; WOW. You are doing some awesome work. Can't wait for more updates.

eagleuh1 · 02-11-2010, 09:44 PM

HartRob, are your motor mount purches in the back set of holes like an I6 or front holes. I know you had told me you used the ECE mounts before, I think.
Also, whats the closest those DT headers come to the firewall in the back of header. Thanks. I'm looking at using I6 stands with the stock rubber mount for 327 and homemade adapters. This is what a local guy has on his with a . 5.3. I'm looking for header clearance before I buy a set of DT's though. This sets the engine back a little more than yours looks. Thanks. Jim.

**Hart_Rod** · 02-12-2010, 12:24 AM

Quote:

Originally Posted by Frizzle Fry

I like the Billets too.

Me too...

Quote:

Originally Posted by nickp51chevy

I know people say it a lot, but I did just go though the whole thread, and all's I can say is; WOW. You are doing some awesome work. Can't wait for more updates.

Thanks Nick!

Quote:

Originally Posted by eagleuh1

HartRob, are your motor mount purches in the back set of holes like an I6 or front holes. I know you had told me you used the ECE mounts before, I think.
Also, whats the closest those DT headers come to the firewall in the back of header. Thanks. I'm looking at using I6 stands with the stock rubber mount for 327 and homemade adapters. This is what a local guy has on his with a . 5.3. I'm looking for header clearance before I buy a set of DT's though. This sets the engine back a little more than yours looks. Thanks. Jim.

They're big block motor mounts. There should be a picture in an earlier part of my thread. There's about 2" of clearance between the headers and the firewall on both sides. Here's a couple of pictures.

Since I've got the front end all tore apart, I pulled the bags and switched the air fitting from 1/4" to 3/8" to match the Accuair manifold.

**Hart_Rod** · 02-12-2010, 11:22 PM

Fuel filler neck completed as well as the powersteering lines.

R/

CheyenneShop · 02-13-2010, 01:11 AM

Rob, I really like the Billets as well - are you trying to stay away from TT2's and/or a set of Coys?

I know they get used like crazy, but I think with your look they would look great! Can't wait to see what you decide - Ronnie

eagleuh1 · 02-13-2010, 11:47 AM

Thanks Hartrod for the pics and info. Looks good. Where'd you have the power steering hoses made? Thanks again.

big_al_71 · 02-13-2010, 11:59 AM

Rob she is coming along nicely!!! keep the picts coming..

**Hart_Rod** · 02-13-2010, 12:05 PM

Quote:

Originally Posted by theCheyenneShop

Rob, I really like the Billets as well - are you trying to stay away from TT2's and/or a set of Coys?

I know they get used like crazy, but I think with your look they would look great! Can't wait to see what you decide - Ronnie

There's so many choices, it's to hard to decide! I should know soon....

.

Quote:

Originally Posted by eagleuh1

Thanks Hartrod for the pics and info. Looks good. Where'd you have the power steering hoses made? Thanks again.

I had the hose made at Napa. It uses the same ends as the factory 67-72 hose and a Weatherhead fitting (#1446: 3/8" is 5/8 18 - 16x1.5) to adapt to the pump.

Quote:

Originally Posted by big_al_71

Rob she is coming along nicely!!! keep the picts coming..

Thanks Al.

Number98 · 02-14-2010, 05:36 PM

Your so money.....

**Hart_Rod** · 02-18-2010, 09:01 PM

Quote:

Originally Posted by Number98

Your so money.....

Tomorrow's my wife's birthday, but Big Brown showed up with a really nice gift for me.....

.

R/

smbrouss70 · 02-18-2010, 09:09 PM

Which ones did you get? You know we want to see pictures, and we KNOW you have opened them and probably mounted them on the suburban... so give 'em up already!!!!

jmedero · 02-18-2010, 09:29 PM

It's the 14'' celica suppers right?

**lolife99** · 02-18-2010, 09:36 PM

OK we need them un-wrapped,...

nickp51chevy · 02-18-2010, 09:43 PM

What a tease....

VA72C10 · 02-18-2010, 09:43 PM

Man, you LOVE doing this to us...just like when you took the crewcab for paint.....evil man, just evil

67ChevyRedneck · 02-19-2010, 12:09 AM

After all the time and money you've put into the burb, you're just going to slap some white spoke wagon wheels on it?

strait · 02-19-2010, 01:30 AM

Quote:

Originally Posted by Hart_Rod

Fuel filler neck completed as well as the powersteering lines.

R/

Can you give me a little info on the power stering hoses. I have a 2000 5.3 with the power steering on it I want to use my factory gear boxon my 70 p.u.

how did you adapt the fittings ? Thanks great looking truck

Jvsapp · 02-19-2010, 03:00 AM

coming along really nice.... can't wait to see the finished product

72BlckButy · 02-19-2010, 09:05 AM

We need some more info... don't leave us hangin'!

gcburdic · 02-19-2010, 09:42 AM

Happy bday to your wife Rob....(I'm not even gonna ask about the wheels, because I don't care....really, I have no interest in those stupid wheels, I mean I don't even wanna see just one of them....really, I'm not sayin I'm just sayin')

splehigh · 02-19-2010, 03:36 PM

Nicest burb I have ever seen. Cant wait to see what wheels you chose. I'm guessing maybe the polished Coys.

02-10-2010, 10:25 PM	#752
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) I agree... there's a lot at stake for an experiment. So Hart Rod, have you picked a wheel yet? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-11-2010, 01:02 AM	#754
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) I like the Billets too.

02-11-2010, 02:02 AM	#755
nickp51chevy Registered Chevy Owner Join Date: Aug 2008 Location: Snohomish, wa Posts: 1,557	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) I know people say it a lot, but I did just go though the whole thread, and all's I can say is; WOW. You are doing some awesome work. Can't wait for more updates. __________________ Love is fleeting, but Chevy trucks are forever!!!! 1970 Chevy CST C10 long box 350/400 2008 Chevy Silverado short box 4x4 Had; 1951 Chevy short box 307/T5 1988 Chevy shot box 4x4 350/350 1971 Chevy C10 long box 4x4 350/350 1971 Chevy C20 long box 350/350 1971 Chevy C10 long box 350/350

02-11-2010, 09:44 PM	#756
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) HartRob, are your motor mount purches in the back set of holes like an I6 or front holes. I know you had told me you used the ECE mounts before, I think. Also, whats the closest those DT headers come to the firewall in the back of header. Thanks. I'm looking at using I6 stands with the stock rubber mount for 327 and homemade adapters. This is what a local guy has on his with a . 5.3. I'm looking for header clearance before I buy a set of DT's though. This sets the engine back a little more than yours looks. Thanks. Jim.

02-12-2010, 11:22 PM	#758
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) Fuel filler neck completed as well as the powersteering lines. R/ Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-13-2010, 01:11 AM	#759
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) Rob, I really like the Billets as well - are you trying to stay away from TT2's and/or a set of Coys? I know they get used like crazy, but I think with your look they would look great! Can't wait to see what you decide - Ronnie __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

02-13-2010, 11:47 AM	#760
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) Thanks Hartrod for the pics and info. Looks good. Where'd you have the power steering hoses made? Thanks again.

02-13-2010, 11:59 AM	#761
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) Rob she is coming along nicely!!! keep the picts coming.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

02-14-2010, 05:36 PM	#763
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) Your so money.....

02-18-2010, 09:09 PM	#765
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) Which ones did you get? You know we want to see pictures, and we KNOW you have opened them and probably mounted them on the suburban... so give 'em up already!!!! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

02-18-2010, 09:29 PM	#766
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) It's the 14'' celica suppers right? __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-18-2010, 09:36 PM	#767
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) OK we need them un-wrapped,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-18-2010, 09:43 PM	#768
nickp51chevy Registered Chevy Owner Join Date: Aug 2008 Location: Snohomish, wa Posts: 1,557	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) What a tease.... __________________ Love is fleeting, but Chevy trucks are forever!!!! 1970 Chevy CST C10 long box 350/400 2008 Chevy Silverado short box 4x4 Had; 1951 Chevy short box 307/T5 1988 Chevy shot box 4x4 350/350 1971 Chevy C10 long box 4x4 350/350 1971 Chevy C20 long box 350/350 1971 Chevy C10 long box 350/350

02-18-2010, 09:43 PM	#769
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) Man, you LOVE doing this to us...just like when you took the crewcab for paint.....evil man, just evil __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-19-2010, 12:09 AM	#770
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) After all the time and money you've put into the burb, you're just going to slap some white spoke wagon wheels on it? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 02-19-2010 at 12:09 AM.



Register or Log In To remove these advertisements.

02-19-2010, 03:00 AM	#772
Jvsapp Registered User Join Date: Dec 2008 Location: on a rock in the pacific Posts: 554	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) coming along really nice.... can't wait to see the finished product __________________ 63 4 door Chevy II - NOVACATION (Updated 08/23/09) 65 Morris minor Traveler 77 Chevy Longbed. 93 Corolla JDM 20V Swap Daily Driver (Updated 07/16/09) Powder coating Hawaii Domestic Violence Awareness Show 5/3/09 Hawaii Rod and Custom Show 4/18

02-19-2010, 09:05 AM	#773
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) We need some more info... don't leave us hangin'! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-19-2010, 09:42 AM	#774
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) Happy bday to your wife Rob....(I'm not even gonna ask about the wheels, because I don't care....really, I have no interest in those stupid wheels, I mean I don't even wanna see just one of them....really, I'm not sayin I'm just sayin') __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

02-19-2010, 03:36 PM	#775
splehigh Registered User Join Date: Nov 2008 Location: Glenville, Pa Posts: 445	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) Nicest burb I have ever seen. Cant wait to see what wheels you chose. I'm guessing maybe the polished Coys. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=355153

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.