Project Vitamin C-10 - Page 91 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jonzcustomshop · 02-14-2010, 09:18 AM

lmc has primer bumpers in thier catalog, 38-9481, $99.99 rear 63-66 fleet, and 38-9453,$99.95 primer bumper front 63-66.
1800-lmc-truck

Alan's Classic · 02-14-2010, 02:14 PM

Quote:

Originally Posted by jonzcustomshop

lmc has primer bumpers in thier catalog, 38-9481, $99.99 rear 63-66 fleet, and 38-9453,$99.95 primer bumper front 63-66.
1800-lmc-truck

Thanks Jon, I feel like a big dummy.

I forgot about searching LMC.

aggie91 · 02-15-2010, 04:34 PM

That dust boot looks like the one I should have tomorrow from Jeff. I think that one is slips over the end of the MC. Not sure, but it might work.

To me, your headers look just like the Flowtech ones.

We got snow here on Thursday night and Friday morning. I had 7 inches at my house. I do not know when we had that much before. It is rare in East Texas...Kids got out of school and work shut down, so we had some fun and threw snowballs too.

aggie91 · 02-16-2010, 03:15 PM

Alan, Just saw this in another thread...Look at post #416 in this thread:
http://67-72chevytrucks.com/vboard/s...200082&page=17

I looks like the same carb/fuel line you are using. Looks like his cleared that water outlet fitting...

Hope this helps you...

Alan's Classic · 02-16-2010, 10:42 PM

Quote:

Originally Posted by aggie91

That dust boot looks like the one I should have tomorrow from Jeff. I think that one is slips over the end of the MC. Not sure, but it might work.

To me, your headers look just like the Flowtech ones.

We got snow here on Thursday night and Friday morning. I had 7 inches at my house. I do not know when we had that much before. It is rare in East Texas...Kids got out of school and work shut down, so we had some fun and threw snowballs too.

The angle of that boot is throwing me off. I ordered another from truckandcarshop.com among other things.

The snow was cool while it lasted.

Quote:

Originally Posted by aggie91

Alan, Just saw this in another thread...Look at post #416 in this thread:
http://67-72chevytrucks.com/vboard/s...200082&page=17

I looks like the same carb/fuel line you are using. Looks like his cleared that water outlet fitting...

Hope this helps you...

Thanks for the link. I checked it out real quick at lunch. His water fitting is a long one. That would diffenately help. I'm going to check it out some more.

Fed-Up showed up today with some parts from Summitt.

This piece came from CPP Thanks Jeff

More parts on the way.

Alan's Classic · 02-16-2010, 11:54 PM

Had to go see if the radiator would fit. It's sitting on a 3/4" piece of wood. It fits in the hole. I plan on using the 67-72 truck radiator saddles and top hold downs.

It fills the hole up really nice.

Didn't stay out there long. This is the temp inside the shop.

ruffrida2005 · 02-16-2010, 11:59 PM

Alan where did the radiator come from?

jgh64pkup · 02-17-2010, 12:00 AM

alan the 67-72 top saddles work good
thats what i used on my griffin radiator

Alan's Classic · 02-17-2010, 12:01 AM

Quote:

Originally Posted by ruffrida2005

Alan where did the radiator come from?

Oops, Forgot that info. Summit PN SUM-381328 $211.95

ruffrida2005 · 02-17-2010, 12:07 AM

looks good and thanks for the PN. I'm still trying to figure out what I want.

Alan's Classic · 02-17-2010, 12:25 AM

Quote:

Originally Posted by ruffrida2005

looks good and thanks for the PN. I'm still trying to figure out what I want.

It drives me crazy trying to figure out what to order.

Oh......I also ordered the coated Hooker Headers you recommended.

ruffrida2005 · 02-17-2010, 12:33 AM

Good you will really like the fit. Only thing I dont like is the left hooker is a little close to the oil filter

198plus · 02-17-2010, 12:39 AM

Alan glad to see you making progress. Love the new parts, can't wait to see how the 67-72 truck radiator saddles and hold downs turn out.

sdailey · 02-17-2010, 09:51 AM

Alan is that the same radiator that we saw in the store? It looks like it fits really well.

Alan's Classic · 02-17-2010, 01:21 PM

Quote:

Originally Posted by ruffrida2005

Good you will really like the fit. Only thing I dont like is the left hooker is a little close to the oil filter

Now you tell me.

I remember you saying something about that in the past.

Quote:

Originally Posted by 198plus

Alan glad to see you making progress. Love the new parts, can't wait to see how the 67-72 truck radiator saddles and hold downs turn out.

Thanks Ronnie, it's supposed to be in the 60's this weekend. I'll try to make some progress, but still holding on some parts. Trying to locate some saddles. Sokyclassics.com is the best price so far $45.

Quote:

Originally Posted by sdailey

Alan is that the same radiator that we saw in the store? It looks like it fits really well.

Yes it is.

MacAttack · 02-17-2010, 01:35 PM

Really nice hardware, Alan.

Are you going to use an anode in that radiator, or is the aluminum going to be a problem with the engine's block material?

Alan's Classic · 02-17-2010, 01:38 PM

Quote:

Originally Posted by MacAttack

Really nice hardware, Alan.

Are you going to use an anode in that radiator, or is the aluminum going to be a problem with the engine's block material?

Good question, do you know something I should know. I know my camper has an anode rod in the hot water heater. I was going to run antifreeze safe for aluminum. Is that good enough? More info please.

MacAttack · 02-17-2010, 01:51 PM

Quote:

Originally Posted by Alan's Classic

I was going to run antifreeze safe for aluminum. Is that good enough?

Don't know, Kid. Talking out my butt - last custom aluminum radiator maker I had quote one for my 65' Tan truck said if I went that way I should put an anode (zink I think) where the normal radiator petcock is located, because of the difference in the materials.

Again, I'm guessing - maybe the special juice is enough (?)

Mac.

MacAttack · 02-17-2010, 01:53 PM

Here you go, My Friend. May be hype - I don't know.

http://www.flex-a-lite.com/auto/html/anode.html

MacAttack · 02-17-2010, 02:23 PM

Another little bit of supposed information:

(When running an aluminum radiator or any aluminum parts in contact with the water jacket, make sure to run a sacrificial anode (usually zinc) to prevent the electro-displacement of the aluminum. This will save the aluminum parts, in short.)

http://www.streetrodstuff.com/Articl...g_Suggestions/

jason65 · 02-17-2010, 04:34 PM

Readiator looks good in there Alan.

Good catch Mac. I didn't know that. I guess I need to get one for mine.

Strodder · 02-17-2010, 04:53 PM

Allan it's looking great. Good info Mac. I never thought of that. We have an anode in our Toy Hauler's water heater. It wears out so check it periodicity.

4dranch · 02-17-2010, 07:51 PM

nice work alan and thanks for the pictures

.
And thanks Mac for the info.

ruffrida2005 · 02-17-2010, 07:58 PM

Thanks for that info Mac that's good to know when I go to order mine.

Alan's Classic · 02-17-2010, 08:35 PM

Thanks Guys for the comments. Thanks Mac for the heads up. I'll go read those links tonight I hope. Just a quick post here to let ya'll know about the headers. I'm going crazy. I believe alot of my problems, if not all are the CPP perches. I need the front tube to go up and back. I got my Hookers today and test fitted the left side. I couldn't even get a bolt started. I'm going to write CPPJeff and see if they recommend a certain header. Also do some searching.

You can see the tube hitting the frame, but even if it didn't the perch would.

02-14-2010, 09:18 AM	#2251
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Project Vitamin C-10 lmc has primer bumpers in thier catalog, 38-9481, $99.99 rear 63-66 fleet, and 38-9453,$99.95 primer bumper front 63-66. 1800-lmc-truck __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

02-15-2010, 04:34 PM	#2253
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project Vitamin C-10 That dust boot looks like the one I should have tomorrow from Jeff. I think that one is slips over the end of the MC. Not sure, but it might work. To me, your headers look just like the Flowtech ones. We got snow here on Thursday night and Friday morning. I had 7 inches at my house. I do not know when we had that much before. It is rare in East Texas...Kids got out of school and work shut down, so we had some fun and threw snowballs too. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-16-2010, 03:15 PM	#2254
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project Vitamin C-10 Alan, Just saw this in another thread...Look at post #416 in this thread: http://67-72chevytrucks.com/vboard/s...200082&page=17 I looks like the same carb/fuel line you are using. Looks like his cleared that water outlet fitting... Hope this helps you... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-16-2010, 11:54 PM	#2256
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Project Vitamin C-10 Had to go see if the radiator would fit. It's sitting on a 3/4" piece of wood. It fits in the hole. I plan on using the 67-72 truck radiator saddles and top hold downs. It fills the hole up really nice. Didn't stay out there long. This is the temp inside the shop. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

02-16-2010, 11:59 PM	#2257
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Project Vitamin C-10 Alan where did the radiator come from? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

02-17-2010, 12:00 AM	#2258
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Project Vitamin C-10 alan the 67-72 top saddles work good thats what i used on my griffin radiator __________________ Gage 1967 C10 Shortbed Stepside

02-17-2010, 12:07 AM	#2260
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Project Vitamin C-10 looks good and thanks for the PN. I'm still trying to figure out what I want. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

02-17-2010, 12:33 AM	#2262
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Project Vitamin C-10 Good you will really like the fit. Only thing I dont like is the left hooker is a little close to the oil filter __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

02-17-2010, 12:39 AM	#2263
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: Project Vitamin C-10 Alan glad to see you making progress. Love the new parts, can't wait to see how the 67-72 truck radiator saddles and hold downs turn out. __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl Last edited by 198plus; 02-17-2010 at 10:56 AM.

02-17-2010, 09:51 AM	#2264
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: Project Vitamin C-10 Alan is that the same radiator that we saw in the store? It looks like it fits really well. __________________ Shannon

02-17-2010, 01:35 PM	#2266
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Project Vitamin C-10 Really nice hardware, Alan. Are you going to use an anode in that radiator, or is the aluminum going to be a problem with the engine's block material? __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

02-17-2010, 01:53 PM	#2269
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Project Vitamin C-10 Here you go, My Friend. May be hype - I don't know. http://www.flex-a-lite.com/auto/html/anode.html __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

02-17-2010, 02:23 PM	#2270
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Project Vitamin C-10 Another little bit of supposed information: (When running an aluminum radiator or any aluminum parts in contact with the water jacket, make sure to run a sacrificial anode (usually zinc) to prevent the electro-displacement of the aluminum. This will save the aluminum parts, in short.) http://www.streetrodstuff.com/Articl...g_Suggestions/ __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

02-17-2010, 04:34 PM	#2271
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: Project Vitamin C-10 Readiator looks good in there Alan. Good catch Mac. I didn't know that. I guess I need to get one for mine.

02-17-2010, 04:53 PM	#2272
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Project Vitamin C-10 Allan it's looking great. Good info Mac. I never thought of that. We have an anode in our Toy Hauler's water heater. It wears out so check it periodicity. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*



Register or Log In To remove these advertisements.

02-17-2010, 07:51 PM	#2273
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project Vitamin C-10 nice work alan and thanks for the pictures. And thanks Mac for the info. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

02-17-2010, 07:58 PM	#2274
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Project Vitamin C-10 Thanks for that info Mac that's good to know when I go to order mine. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

02-17-2010, 08:35 PM	#2275
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Project Vitamin C-10 Thanks Guys for the comments. Thanks Mac for the heads up. I'll go read those links tonight I hope. Just a quick post here to let ya'll know about the headers. I'm going crazy. I believe alot of my problems, if not all are the CPP perches. I need the front tube to go up and back. I got my Hookers today and test fitted the left side. I couldn't even get a bolt started. I'm going to write CPPJeff and see if they recommend a certain header. Also do some searching. You can see the tube hitting the frame, but even if it didn't the perch would. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker" Last edited by Alan's Classic; 02-17-2010 at 08:36 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.