can i get 6 lug rotors for 73-87 spindles? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66coffin · 03-09-2010, 05:57 PM

i'm converting my truck (c20 '66) to 6 lug disc. i got 73-87 1/2 ton spindles but i don't want to spend a ton of dough on aftermarket rotors to get the 6 lug, can i buy some that will fit from the parts store? if so which ones do i ask for? if you got a part # too that would be great. thanks guys.

Rannos · 03-09-2010, 07:12 PM

I know LMC sells them but I wanna say I seen them some where else a litte cheaper. They are $139 at LMC if I remember correctly

Hottrucks · 03-09-2010, 07:13 PM

try CPP they are a supporting vender and are greast to work with ask for Jeff

Rannos · 03-09-2010, 07:19 PM

I think it was in my new CCP catalog that I seen them. Think you can even get the fancey cross drilled/slotted rotors from them if ya want.

Tx Firefighter · 03-09-2010, 09:26 PM

Early Classic has them for 89 each.

SCOTI · 03-09-2010, 11:51 PM

Early Classic, CPP, & POL (performance on-line), not to mention other board vendors (GMC Pauls & WES @ Classic Heatbeat).

03-09-2010, 05:57 PM	#1
66coffin Registered User Join Date: Dec 2009 Location: diamond bar, calif. Posts: 206	can i get 6 lug rotors for 73-87 spindles? i'm converting my truck (c20 '66) to 6 lug disc. i got 73-87 1/2 ton spindles but i don't want to spend a ton of dough on aftermarket rotors to get the 6 lug, can i buy some that will fit from the parts store? if so which ones do i ask for? if you got a part # too that would be great. thanks guys. __________________ '66 c10ish straight 292 power!

03-09-2010, 07:12 PM	#2
Rannos Registered User Join Date: Feb 2010 Location: New Caney, Texas Posts: 356	Re: can i get 6 lug rotors for 73-87 spindles? I know LMC sells them but I wanna say I seen them some where else a litte cheaper. They are $139 at LMC if I remember correctly

03-09-2010, 07:13 PM	#3
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: can i get 6 lug rotors for 73-87 spindles? try CPP they are a supporting vender and are greast to work with ask for Jeff __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

03-09-2010, 07:19 PM	#4
Rannos Registered User Join Date: Feb 2010 Location: New Caney, Texas Posts: 356	Re: can i get 6 lug rotors for 73-87 spindles? I think it was in my new CCP catalog that I seen them. Think you can even get the fancey cross drilled/slotted rotors from them if ya want.

03-09-2010, 09:26 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: can i get 6 lug rotors for 73-87 spindles? Early Classic has them for 89 each. __________________ I'm on the Instagram- @Gearhead_Kevin

03-09-2010, 11:51 PM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: can i get 6 lug rotors for 73-87 spindles? Early Classic, CPP, & POL (performance on-line), not to mention other board vendors (GMC Pauls & WES @ Classic Heatbeat). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.