|
03-13-2010, 03:23 PM
|
#1 |
|
Registered User
Join Date: Feb 2010
Location: San Antonio
Posts: 26
|
60 chevy torsion bars
I was curious if any one knows if the torsion bars on a 60 chevy half ton will
support a blig block engine. Or should i look into upgrading to coils or do they make 3/4 ton torsion bars for the 60 - 62 3/4 ton or 1 ton trucks. Any input would be helpful.Thanx in advance. 
|
|
|
|
03-14-2010, 01:12 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 60 chevy torsion bars
The '60-'62 C10's and C20's had torsion bar front suspensions. I've only seen one '60-'62 C30 and it had coil springs up front.
Installing a big block in a '60-'62 should just lower it a bit. If it is too low for you, then you can just adjust the torsion bars to raise it up to where you like it.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
