Finally making it to the track... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Super73 · 03-19-2010, 12:02 PM

Well, I am about to go put the truck on the trailor and get things ready to go for tomorrow.. Wish me luck and no breakage..

71402BB · 03-19-2010, 12:12 PM

Best of luck! oh and we want some video footage!

1FAST68 · 03-19-2010, 03:24 PM

Good luck, and don't break anything. I will be waiting on times.

68 C-10 KID · 03-19-2010, 04:54 PM

Do I see some 10.90's on squeeze.

nomrlz · 03-19-2010, 06:01 PM

good luck! hopefully you'll get some low 11 N/A passes in

shortbed70 · 03-19-2010, 06:18 PM

Good luck man and keep it out of the wall and in one piece. Must have video of this monstrosity please...

Marv D · 03-19-2010, 06:22 PM

Go beat the track up

and have fun. We will all be waiting for the report.

hotrod 80 · 03-19-2010, 11:21 PM

Man ADRL is qualifying as in typing . I can hear them out the window , but i have to work early tommorow . Gonna try and make it out after work sat. if it don't rain out . Should make for an interesting sunday at the little track . all the power being in town and the nationals next week . Good luck on you trip .

Super73 · 03-20-2010, 12:02 AM

Thanks guys.. Any predictions?? Motor and N20??

Truck makes about 20 more HP
Weighs 300lbs less
Has a 4.56 gear vs a 3.73..

This time I'm hoping to get both kits working with a 200-300 hit in it.

KQQL IT · 03-20-2010, 03:29 AM

1.4xx 60 fts

noonzor · 03-20-2010, 10:25 AM

cant wait to see the pics/video and hear how she ran!! best of luck man!

Marv D · 03-20-2010, 12:16 PM

You really want a prediction,,, Truck weighs 300 pounds less, has 20 more HP, going to hit it with 200 or 300 compared to the 11.2's on a 100 horse shot........

10.48 blacktracking to the 1/8th

Even if you keep it hooked up,,, I don't think it will dip into chassis cert territory. These things are about as aerodynamic as throwing an apartment complex down the track. But I hope you prove me wrong

Super73 · 03-20-2010, 01:24 PM

Marv,

I'll be leaving on motor with the window switch set a few hundred rpm above the verter. Then letting the 100 hit come in graving the second stage right after the gear change. If it works I'll up the second stage. I don't think it'll go in cert area but hopefully a .30

Super73 · 03-20-2010, 08:17 PM

Frustrating when you only get three passes in. 11.57@117.9 and 11.65@117.8 on motor. Bottle had a fuel issue and the fuel pressure safety switch kept turning it on and off so I just lifted. I'll try to get back out soon.

Schwinn68 · 03-20-2010, 08:40 PM

those are still some pretty good times! It's still plenty early in the season to get things dialed in. Get any vid from the track today?

nomrlz · 03-21-2010, 09:07 AM

i've had the same trouble with the FPSS screwing up runs. one night i got so pissed i just pulled and rolled the dice

. i had checked the fuel pressure prior and made sure it was good. i was sure you'd get get under the 50's

Marv D · 03-21-2010, 10:28 AM

Ya know,,, I swear to gawd I aaallllllllmost said it was gonna slow down a few tenths,, because it seems that first trip out is nothing but find the dang issues and get ready for the REAL test (LOL)
Hey, at least the issues are minimal and you will be ready to put a hurt to the slicks next time.

1FAST68 · 03-21-2010, 10:55 AM

There is allways more left in it with a new combo. It will come down. Good times!!!

hotrod 80 · 03-21-2010, 10:55 AM

a day at the track is alot funner than a day at work . You guessed it working again .

Super73 · 03-21-2010, 03:43 PM

11.57@117.9mph

YouTube - Pass_1.MOV

11.6@117.6mph

YouTube - Pass_2.MOV

71chevytruckguy · 03-21-2010, 05:40 PM

Always take to some time to a new set up figured out. I've been at the track the 4 weeks in a row and still have a few issues to iron out. Assuming thos passes are all motor, its pick up a little bit so atleast your time wasn't compelely wasted. Good luck man, Chris.

shortbed70 · 03-21-2010, 09:21 PM

I couldn't get videos to play

djracer · 03-22-2010, 10:17 AM

Just flow the nitrous side fuel pressure each time you go to the track and bypass the fpss. I have heard of too many problems with those so I don't use one. I have a homemade flow tool with a a big gauge that flows through a 73 holley jet.

swb85 · 03-22-2010, 10:46 AM

Quote:

Originally Posted by djracer

Just flow the nitrous side fuel pressure each time you go to the track and bypass the fpss. I have heard of too many problems with those so I don't use one. I have a homemade flow tool with a a big gauge that flows through a 73 holley jet.

x1000000! I use an induction solutions flow tool (really nice piece) and threw the fpss in the trash at his advice.....they seem to cause more problems than they prevent.

How were the 60ft's on motor?

Super73 · 03-22-2010, 03:55 PM

Well I just noticed a couple things in the data logger.

The verter was only flashing to 4400-4,500 vs 4,900 last time out. There might be a few things causing this IMO.

1) The intake change caused me to loose about 10ftlbs on the initial hit.

2) I just notice the timing table never got changed from the street tune. So I was not giving it everything it had on the launch. At 4,400 I was only giving it 19* of timing, fading in to 28-29* at 6k rpm, not the 28-29 I normally do out of the hole.

3) The weight change, not having as much weight loading against the verter.

Another thing I noticed, on the 2-3 shift, RPM drops about 2,100rpm. If at 7,200, this puts me at 5,100. Again, in the low timing table fading in to full timing at 6k. Seeing as I'm going through the traps in 3rd at 6k rpm, I never had full timing in 3rd gear..

How much will these couple of things change the motor pulls? Who knows, but hopefully it's worth something.

03-19-2010, 12:02 PM	#1
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Finally making it to the track... Well, I am about to go put the truck on the trailor and get things ready to go for tomorrow.. Wish me luck and no breakage.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-19-2010, 12:12 PM	#2
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	Re: Finally making it to the track... Best of luck! oh and we want some video footage! __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

03-19-2010, 03:24 PM	#3
1FAST68 Registered User Join Date: Apr 2008 Location: east, tx Posts: 149	Re: Finally making it to the track... Good luck, and don't break anything. I will be waiting on times. __________________ 68 chevy truck ls3, 418ci, pump gas 10.81@121.8 all motor. 1.47 60ft 70 suburban 350 tbi swap, 700r4, work in progress

03-19-2010, 04:54 PM	#4
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: Finally making it to the track... Do I see some 10.90's on squeeze. __________________ 427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN.

03-19-2010, 06:01 PM	#5
nomrlz Registered User Join Date: Jan 2010 Location: Wataga,IL Posts: 666	Re: Finally making it to the track... good luck! hopefully you'll get some low 11 N/A passes in

03-19-2010, 06:18 PM	#6
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Finally making it to the track... Good luck man and keep it out of the wall and in one piece. Must have video of this monstrosity please... __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-19-2010, 06:22 PM	#7
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: Finally making it to the track... Go beat the track up and have fun. We will all be waiting for the report. __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

03-19-2010, 11:21 PM	#8
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Finally making it to the track... Man ADRL is qualifying as in typing . I can hear them out the window , but i have to work early tommorow . Gonna try and make it out after work sat. if it don't rain out . Should make for an interesting sunday at the little track . all the power being in town and the nationals next week . Good luck on you trip . __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

03-20-2010, 12:02 AM	#9
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Finally making it to the track... Thanks guys.. Any predictions?? Motor and N20?? Truck makes about 20 more HP Weighs 300lbs less Has a 4.56 gear vs a 3.73.. This time I'm hoping to get both kits working with a 200-300 hit in it. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-20-2010, 03:29 AM	#10
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,257	Re: Finally making it to the track... 1.4xx 60 fts __________________ " That didnt make it any newer " " Dont antique the equipment "

03-20-2010, 10:25 AM	#11
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: Finally making it to the track... cant wait to see the pics/video and hear how she ran!! best of luck man! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

03-20-2010, 12:16 PM	#12
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: Finally making it to the track... You really want a prediction,,, Truck weighs 300 pounds less, has 20 more HP, going to hit it with 200 or 300 compared to the 11.2's on a 100 horse shot........ 10.48 blacktracking to the 1/8th Even if you keep it hooked up,,, I don't think it will dip into chassis cert territory. These things are about as aerodynamic as throwing an apartment complex down the track. But I hope you prove me wrong __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

03-20-2010, 01:24 PM	#13
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Finally making it to the track... Marv, I'll be leaving on motor with the window switch set a few hundred rpm above the verter. Then letting the 100 hit come in graving the second stage right after the gear change. If it works I'll up the second stage. I don't think it'll go in cert area but hopefully a .30 __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-20-2010, 08:17 PM	#14
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Finally making it to the track... Frustrating when you only get three passes in. 11.57@117.9 and 11.65@117.8 on motor. Bottle had a fuel issue and the fuel pressure safety switch kept turning it on and off so I just lifted. I'll try to get back out soon. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-20-2010, 08:40 PM	#15
Schwinn68 Registered User Join Date: Mar 2010 Location: Minooka IL Posts: 191	Re: Finally making it to the track... those are still some pretty good times! It's still plenty early in the season to get things dialed in. Get any vid from the track today? __________________ Ben _____________________________________ 1971 Chevy shortbed 350/4-speed sold 2005 Chevy Duramax EC/4x4 Local 597 Pipefitters certified TIG MIG and stick welder



Register or Log In To remove these advertisements.

03-21-2010, 09:07 AM	#16
nomrlz Registered User Join Date: Jan 2010 Location: Wataga,IL Posts: 666	Re: Finally making it to the track... i've had the same trouble with the FPSS screwing up runs. one night i got so pissed i just pulled and rolled the dice . i had checked the fuel pressure prior and made sure it was good. i was sure you'd get get under the 50's

03-21-2010, 10:28 AM	#17
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: Finally making it to the track... Ya know,,, I swear to gawd I aaallllllllmost said it was gonna slow down a few tenths,, because it seems that first trip out is nothing but find the dang issues and get ready for the REAL test (LOL) Hey, at least the issues are minimal and you will be ready to put a hurt to the slicks next time. __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

03-21-2010, 10:55 AM	#18
1FAST68 Registered User Join Date: Apr 2008 Location: east, tx Posts: 149	Re: Finally making it to the track... There is allways more left in it with a new combo. It will come down. Good times!!! __________________ 68 chevy truck ls3, 418ci, pump gas 10.81@121.8 all motor. 1.47 60ft 70 suburban 350 tbi swap, 700r4, work in progress

03-21-2010, 05:40 PM	#21
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Finally making it to the track... Always take to some time to a new set up figured out. I've been at the track the 4 weeks in a row and still have a few issues to iron out. Assuming thos passes are all motor, its pick up a little bit so atleast your time wasn't compelely wasted. Good luck man, Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

03-21-2010, 09:21 PM	#22
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Finally making it to the track... I couldn't get videos to play __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-22-2010, 10:17 AM	#23
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Finally making it to the track... Just flow the nitrous side fuel pressure each time you go to the track and bypass the fpss. I have heard of too many problems with those so I don't use one. I have a homemade flow tool with a a big gauge that flows through a 73 holley jet. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-22-2010, 03:55 PM	#25
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Finally making it to the track... Well I just noticed a couple things in the data logger. The verter was only flashing to 4400-4,500 vs 4,900 last time out. There might be a few things causing this IMO. 1) The intake change caused me to loose about 10ftlbs on the initial hit. 2) I just notice the timing table never got changed from the street tune. So I was not giving it everything it had on the launch. At 4,400 I was only giving it 19* of timing, fading in to 28-29* at 6k rpm, not the 28-29 I normally do out of the hole. 3) The weight change, not having as much weight loading against the verter. Another thing I noticed, on the 2-3 shift, RPM drops about 2,100rpm. If at 7,200, this puts me at 5,100. Again, in the low timing table fading in to full timing at 6k. Seeing as I'm going through the traps in 3rd at 6k rpm, I never had full timing in 3rd gear.. How much will these couple of things change the motor pulls? Who knows, but hopefully it's worth something. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.