|
03-22-2010, 05:16 PM
|
#1 |
|
Registered User
Join Date: Jan 2010
Location: Fuquay Varina NC
Posts: 29
|
1964 Radiator
I am converting my truck from a inline 6 to 350. Does anyone know which radiator will cross reference. It need's to be one for the transmission as well.
I can buy a new one but am very close to some very large junk yard's. Thank You Randy |
|
|
|
03-22-2010, 10:17 PM
|
#2 |
|
One foot in front of the other
 
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,443
|
Re: 1964 Radiator
IMO is going to be tough to find- I got mine from Autozone for about $200.00.
|
|
|
|
|
03-23-2010, 07:59 AM
|
#3 |
|
and a few others
Join Date: Jun 2007
Location: Blue Ridge Mountains of VA
Posts: 5,638
|
Re: 1964 Radiator
Summit Racing has aluminum rads that will work. It's what I used in my 64. I'll try to find the part number for ya.
__________________
Bill  US Army Vet -193rd InfantryBlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi |
|
|
|
|
03-23-2010, 11:14 AM
|
#4 |
|
Registered User
Join Date: Sep 2009
Location: Marianna, Florida
Posts: 339
|
Re: 1964 Radiator
I picked up an aluminum AFCO off of ebay for around 100 bucks shipped. I just measured the original core size and got as close as possible. I do run a seperate trans cooler, but thats cheap as well. It sits in factory type saddles at the bottom, and I bent up an aluminum top bracket to hold it in at the top. Keeps it at 180 even in traffic on hot days.
__________________
Slowly but surely getting it done. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
