Th350 or 700r4 behind 420hp 383

[POPO1984]

Just like the title says. what would you prefer behind a 383 stroker pushing around 420 hp 450 tq. It will be a daily driver and sometimes go to the track. Ill get on it hard a couple times a week when i just have too but will just go back and forth to work most of the time.

[cableguy0]

Just based on cost alone the th350 is the better option and with a couple upgrades will be way less prone to breaking than the 700r4. A th350 with a decent converter and heavy duty sprag should hold up just fine. Theres a laundry list of stuff you need for a 700r4 to maybe hold up.

[gchemist]

Yup, you'll spend $2K for a 700R4 like mine. Worth every dime in my book. I put a good beating on it.
Check these out: http://www.transmissioncenter.net/700MegaRaptor.htm

Mine is between a level 3 and 4.

[POPO1984]

Well I have a th350 right now. But I plan onkeeping the truck forever so I figured that a. 700 would maybe save me so mpg. I found a 700 for 200 bucks of course it will need a rebuild but I should be able to get maybe 300 for the the350 so I could recoup some money from that. Besides in my last th350 at 65 mph it was drinking gas. That was in a 64 impala as with stock 350

[fiddy9apache]

i prefure the 4L80E

[ruffrida2005]

man I'm thinking about the same thing right now. I have a decent built T350, but I want the 4th gear.

[454Headache]

I like the TH400. The TH350 is great too. Get it if you don't mind the higher revs and lack of 4th gear. There are plenty of cheap TH400/350's laying around that will stand up to the abuse you can give it. For $2,000 you can get a used or rebuilt one, and then use the rest of the money for a used gear vendors OD/UD.

[djracer]

I like a good 700 but just make sure you get a heavy duty converter I broke several of them before I got one to stay in my old street street extra cab.

Call Bob Harrison at TCI he is the 700 god in my opinion.

[POPO1984]

what is the cost to build up a 700 to handle around 420 hp and what all is needed

[POPO1984]

does anyone know anything about the monster transmissions or bowtie transmissions. I think monster was used on Copperhead.

[sv10001975]

I can tell you thing, if you go with the 700, the best money you will spend is the 150 bucks for the tv made ez from bowtie overdrives. you can not get it to shift right without it. it will always be off somewhere without it. the best mod i know of for the trans system. And on the converter, go ahead and get a good one, i have a 383 with around 430 horse and i have already replaced one converter in 3000 miles.

[POPO1984]

Thanks for the info bro. What stall speed are you running

[rjs53]

I have a ART Carr 700r4 with the 9" convertor 3200 stahl, have had it for 8yrs no problems and almost 200 1/4 mile passes 12.60 @107 3300 lbs and i drive it like i stold it everytime. I called Art Carr and asked for some info once and almost got in a fight over the phone when he told me he never built a 700 come to find out they just use his name. That being said have you thought about a 2004r if your going to spend money on an overdrive their very good transmisions and can take more than the 700, also fit in the same hole as the th350. no drive line shortening

[team39763]

Originally Posted by rjs53

I called Art Carr and asked for some info once and almost got in a fight over the phone when he told me he never built a 700 come to find out they just use his name.

LOL. I got into an argument with another racer when I told him I had a Redneck converter made by Art Carr. He didn't believe me, but then I showed him my reciept and it said Art Carr/Redneck Performance. I did some digging after that and it seems that a lot of people use his name in/on/around there products.

[POPO1984]

Yeah the real Art Carr is in california. There is a shop here in Texas that uses his name

[Super73]

I've been on the fence about selling my 4L80E for a glide in my truck just because I don't drive it a ton on the street any more and always in the search for weight. But then again, if might go slower with a 1.8x first gear.

For a DD, I'd want an OD with lock up verter. If it takes $2k to get a 700 to work, then you might be ahead getting a used stock 80E and buying a controller for it. These 80E's are strong!! Also remember, it isn't HP that breaks transmissions, it's TQ and heat.

[fiddy9apache]

Originally Posted by Super73

I've been on the fence about selling my 4L80E for a glide in my truck just because I don't drive it a ton on the street any more and always in the search for weight. But then again, if might go slower with a 1.8x first gear.

For a DD, I'd want an OD with lock up verter. If it takes $2k to get a 700 to work, then you might be ahead getting a used stock 80E and buying a controller for it. These 80E's are strong!! Also remember, it isn't HP that breaks transmissions, it's TQ and heat.

im suprised your the only one besides me in this thread thats pushing the 4L80E, im using baumann controller on my trans.

[rjs53]

whats the price on a controller for the 4l80E, and is there a differance between one say from GM versus aftermarket?

[Super73]

Don't quote me but I think controllers are some wheres between $700-$1200.. Depends on who's you go with. I don't know which ones do what or are better than others though.. IMO, if you can set the upshift by RPM/throttle position, down shift by rpm/throttle position in all gears and converter lock up by throttle position and/or mph in 2nd through 4rth, you should be pretty good to go..

[cdowns]

www.fbperformance.com is where i've had great results they've been racing in the northeast for a long time

[POPO1984]

that price is about what i have found. Except I have found one by baumen which is about 500 bucks with pretty good reviews

[djracer]

or you can call TCI and get a 6 speed 4l80 With controller but its not cheap.

[POPO1984]

Just $5,000.00

[djracer]

I thoght they were allot higher. That is a deal.

[fiddy9apache]

Originally Posted by POPO1984

that price is about what i have found. Except I have found one by baumen which is about 500 bucks with pretty good reviews

its a great product, we use them alot. its very user friendy and you can control EVERYTHING, you can make the trans do back flips if you wanted it to haha.

heck a 80E is a th400 with over drive and a lockup tc, you have the best of everything in one package. low first gear, strenght, lock up tc, overdrive and its all electronic.