My Build Begins! - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tallhoedude · 04-13-2010, 07:47 AM

if i would have spend more time,it would have eventually
pulled itself thru it.it was digging slowly.
but still a blast.
im building a set of lighter weight bolt-together rims for my
bigger 67's.
once theyre done,were going back,the left side of that pit is deeper!

watahyahknow · 04-13-2010, 08:09 PM

i wonder if using a wider rim on the same tire would give it more stability in turn and sideways on slopes the tiretread to rim combo would be more triangular and the sides cant shift side to side as mush when yore going to use the bolt together rims you might be able to use the widest side of 2 sets , prolly be hard to get the tire to pop when inflating though

nvrsatisfied · 04-22-2010, 01:31 PM

long time......well i can see you have been out enjoying that hard work. that pit looked Major McNasty, and of all things a little ol' heep pulled you out

i would of liked to see who followed you after that......some nice little rutts you left behind.
my lazy butt shacked up for the winter and got next to nothing done. but the weather has warmed up so i gotta get back in the swing of things. catch ya around....

keep the vids coming

tallhoedude · 11-16-2010, 11:17 AM

well,its been forever since ive been on here.

been a busy summer.
bought a hauler.2004 gmc 5500 duramax and 25' trailer.

tallhoedude · 11-16-2010, 11:21 AM

and done a lil playin

tallhoedude · 11-16-2010, 11:28 AM

pics:muddin

tallhoedude · 11-16-2010, 11:29 AM

more pics:

tallhoedude · 11-16-2010, 11:30 AM

and finally working on gettin the top pieces made and installed:

tallhoedude · 11-16-2010, 11:32 AM

winter is coming,making a few changes this winter:
little more lift in rear to level truck and make room for taller tires.
swap to an auto trans and custom built(by me) transfer case.

watahyahknow · 11-16-2010, 05:50 PM

mud MUD OH GLORIOUS MUUUUUD :p thats one cool truck

chevy2racr · 11-17-2010, 09:35 PM

I was worried this was gonna be a psyc out and someone just stumbled across the thread.. Glad to see some pics though man!

tallhoedude · 11-18-2010, 08:41 AM

THANKS
truck has been so much fun.
heres a carnage pic:
its my r/f axle shaft

watahyahknow · 11-18-2010, 01:58 PM

woops , now THERES youre problem
heared a trick a long time ago where racers draw a white paintline across the length of the axle , if the line gets twisted more than one rotation its time to replace the axle ...... you do need to pull them to see it tough

tallhoedude · 11-19-2010, 08:24 AM

Quote:

Originally Posted by watahyahknow

woops , now THERES youre problem
heared a trick a long time ago where racers draw a white paintline across the length of the axle , if the line gets twisted more than one rotation its time to replace the axle ...... you do need to pull them to see it tough

YES,a few of the monster truck guys do the same thing,a rear would be no big deal to do,tire can stay on,10 bolts and its out.The front however,would be a pain,1000 pound tire off,100lb hub,spindle,10lbs of grease,just more than i really want to go thru.

chevy2racr · 11-19-2010, 06:23 PM

Quote:

Originally Posted by tallhoedude

YES,a few of the monster truck guys do the same thing,a rear would be no big deal to do,tire can stay on,10 bolts and its out.The front however,would be a pain,1000 pound tire off,100lb hub,spindle,10lbs of grease,just more than i really want to go thru.

kinda sounds like whining

rcfatcat · 01-13-2011, 05:27 PM

recognized your truck back in the fall at the gas guzzy bog. very cool!! to bad she didnt float but im a huge fan of ya havin the sm465 in it got to take a quick peak at er and over all awesome truck!!

chevy2racr · 04-02-2011, 08:56 PM

hey did ur truck get painted and put on ebay!?!?!

http://cgi.ebay.com/1-64-Custom-69-C...item45f9bad589

sry i had too

anything new though? plans for spring/summer?

watahyahknow · 04-03-2011, 02:50 AM

would make a nice dash ornament

tallhoedude · 10-26-2011, 10:28 AM

im parting this out i think...see for sale post

nvrsatisfied · 10-26-2011, 10:34 AM

oh man what happened?? are you onto a new build??

tallhoedude · 10-26-2011, 10:37 AM

Quote:

Originally Posted by nvrsatisfied

oh man what happened?? are you onto a new build??

nothin has happened,but ive got a lot of ideas for bigger and better changes and thinking about something different((4 door tahoe))so thought id throw it up for sale...if it doesnt sell,im not bothered at all to just make my changes to the k5....

bakerboys · 06-20-2012, 10:24 PM

you still building do you still have that monster

04-13-2010, 07:47 AM	#376
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: My Build Begins! if i would have spend more time,it would have eventually pulled itself thru it.it was digging slowly. but still a blast. im building a set of lighter weight bolt-together rims for my bigger 67's. once theyre done,were going back,the left side of that pit is deeper! __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

04-13-2010, 08:09 PM	#377
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: My Build Begins! i wonder if using a wider rim on the same tire would give it more stability in turn and sideways on slopes the tiretread to rim combo would be more triangular and the sides cant shift side to side as mush when yore going to use the bolt together rims you might be able to use the widest side of 2 sets , prolly be hard to get the tire to pop when inflating though __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

04-22-2010, 01:31 PM	#378
nvrsatisfied Registered User Join Date: Oct 2007 Location: oklahoma Posts: 457	Re: My Build Begins! long time......well i can see you have been out enjoying that hard work. that pit looked Major McNasty, and of all things a little ol' heep pulled you out i would of liked to see who followed you after that......some nice little rutts you left behind. my lazy butt shacked up for the winter and got next to nothing done. but the weather has warmed up so i gotta get back in the swing of things. catch ya around.... keep the vids coming __________________ Lug Nuts Classic Rides. (Bodywork, small fab, and Restorations) Perry, Ok. We're just two guys, trying our best. 72 cheyenne super https://67-72chevytrucks.com/vboard/...d.php?t=811512 55 chevy truck http://67-72chevytrucks.com/vboard/s...d.php?t=840174

11-16-2010, 11:17 AM	#379
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: My Build Begins! well,its been forever since ive been on here. been a busy summer. bought a hauler.2004 gmc 5500 duramax and 25' trailer. Attached Images __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

11-16-2010, 11:21 AM	#380
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: My Build Begins! and done a lil playin __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

11-16-2010, 11:28 AM	#381
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: My Build Begins! pics:muddin Attached Images __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

11-16-2010, 11:29 AM	#382
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: My Build Begins! more pics: Attached Images __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

11-16-2010, 11:30 AM	#383
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: My Build Begins! and finally working on gettin the top pieces made and installed: Attached Images __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

11-16-2010, 11:32 AM	#384
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: My Build Begins! winter is coming,making a few changes this winter: little more lift in rear to level truck and make room for taller tires. swap to an auto trans and custom built(by me) transfer case. __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

11-16-2010, 05:50 PM	#385
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: My Build Begins! mud MUD OH GLORIOUS MUUUUUD :p thats one cool truck __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-17-2010, 09:35 PM	#386
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	Re: My Build Begins! I was worried this was gonna be a psyc out and someone just stumbled across the thread.. Glad to see some pics though man! __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

11-18-2010, 08:41 AM	#387
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: My Build Begins! THANKS truck has been so much fun. heres a carnage pic: its my r/f axle shaft Attached Images __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

11-18-2010, 01:58 PM	#388
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: My Build Begins! woops , now THERES youre problem heared a trick a long time ago where racers draw a white paintline across the length of the axle , if the line gets twisted more than one rotation its time to replace the axle ...... you do need to pull them to see it tough __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

01-13-2011, 05:27 PM	#391
rcfatcat Registered User Join Date: Nov 2008 Location: pennington, newjersey Posts: 129	Re: My Build Begins! recognized your truck back in the fall at the gas guzzy bog. very cool!! to bad she didnt float but im a huge fan of ya havin the sm465 in it got to take a quick peak at er and over all awesome truck!! __________________ 78 k5 offroad project 350 sm465 60/14 np205 boatside, dovenose

04-02-2011, 08:56 PM	#392
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	Re: My Build Begins! hey did ur truck get painted and put on ebay!?!?! http://cgi.ebay.com/1-64-Custom-69-C...item45f9bad589 sry i had too anything new though? plans for spring/summer? __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa



Register or Log In To remove these advertisements.

04-03-2011, 02:50 AM	#393
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: My Build Begins! would make a nice dash ornament __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-26-2011, 10:28 AM	#394
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: My Build Begins! im parting this out i think...see for sale post __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

10-26-2011, 10:34 AM	#395
nvrsatisfied Registered User Join Date: Oct 2007 Location: oklahoma Posts: 457	Re: My Build Begins! oh man what happened?? are you onto a new build?? __________________ Lug Nuts Classic Rides. (Bodywork, small fab, and Restorations) Perry, Ok. We're just two guys, trying our best. 72 cheyenne super https://67-72chevytrucks.com/vboard/...d.php?t=811512 55 chevy truck http://67-72chevytrucks.com/vboard/s...d.php?t=840174

06-20-2012, 10:24 PM	#397
bakerboys Registered User Join Date: Aug 2010 Location: Pikeville NC Posts: 239	Re: My Build Begins! you still building do you still have that monster

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.