Frame blueprint for 56 chevy shortbed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slammy · 05-10-2010, 09:23 PM

Looking for exact measurements for a 56 chevy shortbed. Gonna build my own frame as mine has been hacked up by a shady camaro clip install. I emailed some of the companies that offer complete frames and havent gotten any replies. Any help?

**LEEVON** · 05-10-2010, 09:51 PM

Did you try Art Morrison? I saw an article recently where they were digging through stacks of traditional blueprints.

OrrieG · 05-10-2010, 10:00 PM

Factory assembly manual and tech specs at TOCMP will give you the frame dimension and mounting points for shackles, cross members, etc.

Slammy · 05-10-2010, 10:33 PM

Quote:

Originally Posted by OrrieG

Factory assembly manual and tech specs at TOCMP will give you the frame dimension and mounting points for shackles, cross members, etc.

Never seen that site before, i couldnt find anything. Mind giving me a hand?

hotrodrookie · 05-11-2010, 12:26 AM

OrrieG · 05-11-2010, 12:29 AM

Quote:

Originally Posted by Slammy

Never seen that site before, i couldnt find anything. Mind giving me a hand?

The Old Car Manual Project - here is a link to the frame section on the 56 trucks. http://chevy.oldcarmanualproject.com...esto/56134.htm

lots of cool information, not as much frame detail as I remembered. You might look at the 59 truck section too, same as 55-57 except a couple of inches longer at the front.

63 & 64 Bowties · 05-11-2010, 07:31 AM

Quote:

Originally Posted by OrrieG

lots of cool information, not as much frame detail as I remembered.

It seems like there's more and more blind links every time I go back there.
If you spend enough time there, there's several links that take you to where there is a lot of good info, it's just not very user friendly IMHO. It's a very useful site, I just wish they would organize it a little better.

Ipaintgrt · 05-11-2010, 11:38 AM

I couldn't open this link, could anyone else?

Fred T · 05-11-2010, 11:46 AM

Try again later. I think his site is down.

OrrieG · 05-11-2010, 01:22 PM

I always check my links when I post them and it was working last night. I just tried accessing from google and it would not work, so he must be having problems with the site.

blitz'd · 05-11-2010, 05:02 PM

Hey Sammy! Is this yours or a customers?

Slammy · 05-11-2010, 05:45 PM

Quote:

Originally Posted by blitz'd

Hey Sammy! Is this yours or a customers?

Hey joey, its mine. Bought it last week, 56 big window. Dunno when ill actually be able to do anything with it though.

Slammy · 05-11-2010, 05:47 PM

Well thats some info but not really what i was looking for. Wish Jim Meyer or one of those companies would get back to me. Thanks for trying guys, if you come up with anything else please let me know.

hotrodrookie · 05-11-2010, 06:47 PM

What are you planning on doing? What type of front and rear suspension?

Slammy · 05-11-2010, 10:47 PM

Quote:

Originally Posted by hotrodrookie

What are you planning on doing? What type of front and rear suspension?

It has a camaro clip on it already but it was done wrong. Ill be cutting that thing off and probably selling it. I was thinking about building a front suspension from scratch. Rear will probably just be a 4 link setup of some sort.

hotrodrookie · 05-12-2010, 12:07 AM

Your in luck my friend, I forgot that I had these in my assembly manual. Sorry if some of the numbers are fuzzy but the scanner isnt the greatest. You can copy the picture to your hard drive and then blow it up to see them. Cheers!

Btw, now you have to give me your suspension designs

Slammy · 05-12-2010, 01:07 AM

Quote:

Originally Posted by hotrodrookie

Your in luck my friend, I forgot that I had these in my assembly manual. Sorry if some of the numbers are fuzzy but the scanner isnt the greatest. You can copy the picture to your hard drive and then blow it up to see them. Cheers!

Btw, now you have to give me your suspension designs

Thats exactly what i need! But i cant blow it up, its gets all fuzzy on me. Does it look ok your screen? can ya email it to me?

sammylivingston@verizon.net

hotrodrookie · 05-12-2010, 01:30 AM

aw bummer, it goes blurry on me too. Ill try and re-scan in tomorrow when I get a chance.

Slammy · 05-12-2010, 01:32 AM

Quote:

Originally Posted by hotrodrookie

aw bummer, it goes blurry on me too. Ill try and re-scan in tomorrow when I get a chance.

well hell could you mail it to me? lol

Coronas56 · 05-12-2010, 07:48 PM

http://www.selectric.org/59truck/frame1.jpg Here ya go.

hotrodrookie · 05-12-2010, 07:58 PM

beat me to it...

Slammy · 05-12-2010, 09:11 PM

Link aint working guys. Also it says 59, i was under the impression the 58- up frames were different?

hotrodrookie · 05-12-2010, 09:42 PM

the link works for me, and 55-59 are basically the same like OrrieG said above except a few inches longer in the fron due to sheetmetal

Coronas56 · 05-12-2010, 09:56 PM

Worked for me, Could be your comp .....

Slammy · 05-12-2010, 10:12 PM

well ive tried it in my normal Google Chrome browser and Internet explorer with no luck. Dunno whats up

I was able to pull up the cached verison of the site but the pics arent showing up.

05-10-2010, 09:23 PM	#1
Slammy Registered User Join Date: Apr 2008 Location: Fort Worth Texas Posts: 34	Frame blueprint for 56 chevy shortbed Looking for exact measurements for a 56 chevy shortbed. Gonna build my own frame as mine has been hacked up by a shady camaro clip install. I emailed some of the companies that offer complete frames and havent gotten any replies. Any help?

05-10-2010, 09:51 PM	#2
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: Frame blueprint for 56 chevy shortbed Did you try Art Morrison? I saw an article recently where they were digging through stacks of traditional blueprints. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids Last edited by LEEVON; 05-10-2010 at 09:51 PM.

05-10-2010, 10:00 PM	#3
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Frame blueprint for 56 chevy shortbed Factory assembly manual and tech specs at TOCMP will give you the frame dimension and mounting points for shackles, cross members, etc. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

05-11-2010, 12:26 AM	#5
hotrodrookie Registered User Join Date: Sep 2008 Location: Sacramento Posts: 425	Re: Frame blueprint for 56 chevy shortbed

05-11-2010, 11:38 AM	#8
Ipaintgrt Registered User Join Date: Nov 2009 Location: Bend, Oregon Posts: 169	Re: Frame blueprint for 56 chevy shortbed I couldn't open this link, could anyone else?

05-11-2010, 11:46 AM	#9
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Frame blueprint for 56 chevy shortbed Try again later. I think his site is down. __________________ Fred There is no such thing as too much cam...just not enough engine.

05-11-2010, 01:22 PM	#10
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Frame blueprint for 56 chevy shortbed I always check my links when I post them and it was working last night. I just tried accessing from google and it would not work, so he must be having problems with the site. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

05-11-2010, 05:02 PM	#11
blitz'd vintage car junkie Join Date: Aug 2004 Location: DFW Posts: 217	Re: Frame blueprint for 56 chevy shortbed Hey Sammy! Is this yours or a customers? __________________ 1950 chevy truck, s10 swap, bagged, v8, 18s My build: http://67-72chevytrucks.com/vboard/s...d.php?t=392761

05-11-2010, 05:47 PM	#13
Slammy Registered User Join Date: Apr 2008 Location: Fort Worth Texas Posts: 34	Re: Frame blueprint for 56 chevy shortbed Well thats some info but not really what i was looking for. Wish Jim Meyer or one of those companies would get back to me. Thanks for trying guys, if you come up with anything else please let me know.

05-11-2010, 06:47 PM	#14
hotrodrookie Registered User Join Date: Sep 2008 Location: Sacramento Posts: 425	Re: Frame blueprint for 56 chevy shortbed What are you planning on doing? What type of front and rear suspension?

05-12-2010, 12:07 AM	#16
hotrodrookie Registered User Join Date: Sep 2008 Location: Sacramento Posts: 425	Re: Frame blueprint for 56 chevy shortbed Your in luck my friend, I forgot that I had these in my assembly manual. Sorry if some of the numbers are fuzzy but the scanner isnt the greatest. You can copy the picture to your hard drive and then blow it up to see them. Cheers! Btw, now you have to give me your suspension designs Attached Images

05-12-2010, 01:30 AM	#18
hotrodrookie Registered User Join Date: Sep 2008 Location: Sacramento Posts: 425	Re: Frame blueprint for 56 chevy shortbed aw bummer, it goes blurry on me too. Ill try and re-scan in tomorrow when I get a chance.

05-12-2010, 07:48 PM	#20
Coronas56 Registered User Join Date: Nov 2005 Location: Tropical Minnesota Posts: 282	Re: Frame blueprint for 56 chevy shortbed http://www.selectric.org/59truck/frame1.jpg Here ya go. __________________ Semper Fi! Last edited by Coronas56; 05-12-2010 at 07:48 PM.

05-12-2010, 07:58 PM	#21
hotrodrookie Registered User Join Date: Sep 2008 Location: Sacramento Posts: 425	Re: Frame blueprint for 56 chevy shortbed beat me to it...

05-12-2010, 09:11 PM	#22
Slammy Registered User Join Date: Apr 2008 Location: Fort Worth Texas Posts: 34	Re: Frame blueprint for 56 chevy shortbed Link aint working guys. Also it says 59, i was under the impression the 58- up frames were different?



Register or Log In To remove these advertisements.

05-12-2010, 09:42 PM	#23
hotrodrookie Registered User Join Date: Sep 2008 Location: Sacramento Posts: 425	Re: Frame blueprint for 56 chevy shortbed the link works for me, and 55-59 are basically the same like OrrieG said above except a few inches longer in the fron due to sheetmetal

05-12-2010, 09:56 PM	#24
Coronas56 Registered User Join Date: Nov 2005 Location: Tropical Minnesota Posts: 282	Re: Frame blueprint for 56 chevy shortbed Worked for me, Could be your comp ..... __________________ Semper Fi!

05-12-2010, 10:12 PM	#25
Slammy Registered User Join Date: Apr 2008 Location: Fort Worth Texas Posts: 34	Re: Frame blueprint for 56 chevy shortbed well ive tried it in my normal Google Chrome browser and Internet explorer with no luck. Dunno whats up I was able to pull up the cached verison of the site but the pics arent showing up. Last edited by Slammy; 05-12-2010 at 10:15 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.