How about some pics of '73-'87 Short Beds

[ced935]

Cherub, you and your Dad both have NICE trucks! My wife just said my interior needs to look like your Dad's!!

Is that a 3rd one I spy in the garage??

[Earlthe3rd]

Wow Cherub, your dads interior is nice! Would you mind sharing where he got that bench seat from?

[ccreddell]

Originally Posted by 3r!c84

where did u get that center thing!?!!?!

When I was the owner of the Pick-em up Truck Store in Napa, Ca. we sold a LOT of them. Its been a few years now and I dont remember the brand, but Im pretty sure if you get a hold of the Tulare store and send them a pic they can hook you up. Comes in assorted colors too....

Corey

Edit: Oh, and they were designed to sit on the seat, not the floor.

[justpball]

Originally Posted by camshaftgsxr

can anybody take pics of some with the air dam thingy on the front (plastic piece under the bumper) i'm thinking of getting one... also anybody know how they hold up if they hit stuff (the ground, speed bumps, curbs) will it tear? or just fall the heck off?

here is a trick... it is top secret so dont tell anyone...if you buy one take a razor knife and cut the little bottom lip off ( the one that turns under and goes back toward the back of the truck) because if it is on there the air dam cant flex and it will crack when you run over something... mine has been abused badly and still looks good. remember dont tell anyone!

[Fastest32]

That's on of the best burbans I have ever seen. I love that thing! Do you have any interioir pics?

[justpball]

yea here is my build thread, so i dont clutter up this thread with non short wides!
http://67-72chevytrucks.com/vboard/s...=383055&page=2

[rongstad]

Originally Posted by Cherub

some pics of my pops truck. It was my first truck but it never looked like this when i drove it. Atleast it will when my son gets it.

Cherub,

Nice Truck!!! whats the color code for this red? thanks rongstad

[neighbor beast]

My 1987 StepSide. She is a little bangged up right now so here is her front end.


that step side has me wanting to go into my garage and work on my truck right now!

[justpball]

looks like it is hovering...LOL

[JohnC]

It's magic!

[STOCKISH]

FATHOE, heres the best pics I can find from the side of my truck. Hope they work for you.

[baclay9]

What size are your tires 1972SuperCheyenne? Any rubbing problems with your setup. Are you happy with the tire size you picked?

[STOCKISH]

255/40r20 in the front, 295/40r20 inthe rear. Only rubbed in a large dip in the road. In the last pic it has the LS 6.0 installed and it is about 1 or 1 1/2 inches higher so it def. wont rub now. Need to cut a coil out and see what happens.

[baclay9]

Thanks man. Looks awesome. I can't wait to get mine back together with the 5/7 drop.

[erod32]

here's few pics of my 86 C10

[justpball]

very nice erod!

[erod32]

thanx

[watahyahknow]

verry clean truck , are you going to lower it a bit ?

[355bullet]

[QUOTE=Cherub;4027662]some pics of my pops truck. It was my first truck but it never looked like this when i drove it. Atleast it will when my son gets it.




Nice!!!! any pics of the inside of the bed?

[erod32]

Originally Posted by watahyahknow

verry clean truck , are you going to lower it a bit ?

am i goin to lower it a bit? im on 22's..i want too, but i dunno if i should. the back wheels already rub on the chassis frame.

[texasfunk]

I

Originally Posted by erod32

am i goin to lower it a bit? im on 22's..i want too, but i dunno if i should. the back wheels already rub on the chassis frame.

Hmmmm...that seems like a backspacing problem..but nice truck!!

[Ru5tyNut5]

Originally Posted by texasfunk

I

Hmmmm...that seems like a backspacing problem..but nice truck!!

I agree that it's a backspace problem, height shouldn't have anything to do with that. lots of bagged trucks on 24's that lay frame and don't have clearance issues with the frame so having 22's shouldn't matter. get some cheap wheel spacers from Napa or something, prolly less than $20 and will prolly fix your rub.

[Cherub]

Originally Posted by 355bullet

Nice!!!! any pics of the inside of the bed?

naw i sure dont. i had the original tires in the back so i didnt take any pictures of it.

[Cherub]

Originally Posted by Earlthe3rd

Wow Cherub, your dads interior is nice! Would you mind sharing where he got that bench seat from?

Its a custom piece he got here in houston. I dont have the name on me.

[Chionos GMs]

I will put some of my old one.
First one is day I got it, Second is after I painted wheel wells and rims