|
06-16-2010, 11:22 PM
|
#1426 |
|
Registered User
 
Join Date: Sep 2006
Location: San Francisco
Posts: 4,782
|
Re: What did you do to your truck today?
Well I was on my way to work on the 66 when the Ranger started to make that noise again. There is a noise it has been making when taking a left turn on the freeway but not all the time. Well this time it really started. It sounded like a wheel bearing. It managed to stop binding and I drove it home about 15 miles.
It seems the last dork that did the brake job forgot to put the seal on the left side. I drove this truck 35,000 miles like this. After I got the wheel off I noticed I needed new brakes. I should have known something was amiss. When I first got the truck it was making a banging sound when ever I went over a bump. I noticed it stopped when I applied the brakes. Well after looking around the same dork that forgot the seal didn't tighten the caliper mount bolts very well. They were making their way out. Lucky for me I was able to get the remainder of the bearing off. So I had to work on that truck instead today. I put new rotors, brakes and wheel bearings only on the left side but I did repack all of the bearings. I spent about $150 in parts. I think I am going up Sunday to work on the 66. I want to get ti started this weekend.
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
|
|
06-16-2010, 11:31 PM
|
#1427 |
|
Registered User
Join Date: Feb 2009
Location: Nashville TN
Posts: 294
|
Re: What did you do to your truck today?
Finished up my exhaust work. I was running straight 2.5" pipe from the turbo. It sounded a bit ****ty but nice loud turbo whistle. So, I put a magnaflow performance muffler inline and dumped it out flush right in front of the rear tire with 3". I like it, it fills it out and makes you think twice about whats packing under the hood!
__________________
Build Threads: "JED" 66 GMC C1000 http://inliners.org/ubbthreads/ubbth...1857#Post61857 "Cropwell" 66 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=587639 |
|
|
|
06-16-2010, 11:58 PM
|
#1428 |
|
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: What did you do to your truck today?
Hey I finally did something on the truck too. Got the holes drilled for the spotlight, and mounted it for the test fit, before painting.
__________________
http://s1299.photobucket.com/user/jb...23904108567829 |
|
|
|
06-17-2010, 12:21 AM
|
#1429 |
|
Registered User
Join Date: Mar 2010
Location: san jose, california
Posts: 508
|
Re: What did you do to your truck today?
yeah baby!!! finaly got the truck out on the road. im still scared to do a freeway drive, so it was only around my house. power brake upgrade and power steering. Feels good
 
|
|
|
|
06-17-2010, 12:32 AM
|
#1430 | |
|
C10 CLUB Y QUE!
Join Date: Mar 2010
Location: Here
Posts: 2,770
|
Re: What did you do to your truck today?
Quote:
|
|
|
|
|
06-17-2010, 08:21 AM
|
#1431 |
|
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: What did you do to your truck today?
Driving your truck for the first time.....................well words can hardly describe it, sorta like your first kiss, nervous as hell something will go wrong and then you wonder how far you can go, without a mess up!
__________________
http://s1299.photobucket.com/user/jb...23904108567829 |
|
|
|
06-17-2010, 12:33 PM
|
#1432 |
|
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: What did you do to your truck today?
With the ongoing rain a squeek developed in the wiper linkage. Removed the cowl vent and greased all the bushings. Now it's nice and quiet again and should last another 50 years before needing additional attention!
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 |
|
|
|
06-17-2010, 01:34 PM
|
#1433 |
|
Registered User
Join Date: Feb 2010
Location: Watertown, SD
Posts: 30
|
Re: What did you do to your truck today?
Replaced my LH trailing arm, on Sunday.
Is there supposed to be a 1" gap between the channels????? Too many burn outs it guess.
__________________
"Rust does NOT look cool." - Me "Patina is earned, not made." - Old Hot Rodder. Cylinder Index The Cylinder Index (or C.I.) is a measurement device in which the total number of internal combustion engine cylinders (working or non-working) owned by an individual (single-cylinder chainsaws, lawnmowers, 2-cycle, 4-cycle, multi-clinder diesels, trucks and farm tractors) are tallied. The Garage Logician who attains a C.I. in excess of his age is revered. - Joe Soucheray, Mayor of Garage Logic. |
|
|
|
06-17-2010, 06:12 PM
|
#1434 |
|
Registered User
Join Date: Aug 2009
Location: El Paso, Tx
Posts: 180
|
Re: What did you do to your truck today?
nice
__________________
1969 C10 stepside 1973 Cheyenne Blazer Last edited by Dads69C10; 06-17-2010 at 06:25 PM. |
|
|
|
06-17-2010, 07:52 PM
|
#1435 |
|
Registered User
Join Date: Nov 2008
Location: Houston TX
Posts: 362
|
Re: What did you do to your truck today?
Put some POR-15 on my new lower control arms and pwr steering brackets.......getting ready for a 4/6 drop and disk brake/pwr steering conversion.
__________________
The price of cool aint cheap. |
|
|
|
06-18-2010, 04:19 AM
|
#1436 |
|
UCA63
Join Date: Aug 2005
Location: Lloydminster AB Can.
Posts: 1,637
|
Re: What did you do to your truck today?
Very slick Willyp
Those lca's almost look like chrome in that pic T
__________________
member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d) |
|
|
|
06-18-2010, 03:28 PM
|
#1437 |
|
Registered User
Join Date: May 2009
Location: Pittsburgh
Posts: 392
|
Re: What did you do to your truck today?
I took new pics. Here is my NEW bed and New seat!!!
__________________
This statement was made possible by a grant from this station and continued support from viewers like you. Flickr |
|
|
|
06-18-2010, 05:21 PM
|
#1438 | |
|
Registered User
Join Date: Jun 2008
Location: North SD County
Posts: 631
|
Re: What did you do to your truck today?
Quote:
Scheduled work fer my rig this weekend: install new oil pump,o-pan, finned v-covers, edelbrock cam, intake & carb, dist, & ramhorns... Progress is progress!!!
__________________
..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427 |
|
|
|
|
06-19-2010, 05:39 PM
|
#1439 |
|
Registered User
Join Date: Mar 2010
Location: Philadelphia, PA
Posts: 84
|
Re: What did you do to your truck today?
I had bad throttle plates on my 2 barrel (stuck open a little), i took off the intake and carb today to replace with a 4 barrel set up since the two barrel was toast. Anyway, i got to the back of the motor and final got the casting number. I was told it was a 305 when i bought it, turns out its a 350! Score! It was a nice surprise for the day. the casting number is 3970014 and the date code is E374,I think the seven may actually be a ONE, as there are not 37 days in the month.
-Chris |
|
|
|
06-19-2010, 06:41 PM
|
#1440 | |
|
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: What did you do to your truck today?
Quote:
|
|
|
|
|
06-19-2010, 06:48 PM
|
#1441 | |
|
Registered User
 
Join Date: Mar 2010
Location: Canton Ohio
Posts: 109
|
Re: What did you do to your truck today?
Quote:
I put Stovebolt double barrels on my girl today....    
Last edited by dnorris009; 06-19-2010 at 06:53 PM. |
|
|
|
|
06-20-2010, 06:02 AM
|
#1442 | |
|
1# Drobmember in Germany
Join Date: Aug 2008
Location: Wuppertal , Germany
Posts: 518
|
Re: What did you do to your truck today?
Quote:
Pat
__________________
Pat |
|
|
|
|
06-20-2010, 07:15 AM
|
#1443 | |
|
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: What did you do to your truck today?
Quote:
|
|
|
|
|
06-20-2010, 11:16 PM
|
#1444 |
|
Registered User
Join Date: Sep 2006
Location: San Francisco
Posts: 4,782
|
Re: What did you do to your truck today?
I got the 66 fired up today. Was nice to hear is rumble through the open headers.
 Now I just have to get the tranny all buttoned up. I did take a short video of it but have to upload it. Now I just have to figure out how.. 
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
|
|
|
06-20-2010, 11:36 PM
|
#1445 |
|
1961 crewcab
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
|
Re: What did you do to your truck today?
worked on a tune up of the 63... the distributor has had ductape on it since I got it... it ran ok and I had other things going...I looked into it today, and the tape was holding the cap on
one screw missing, and on the other side a wood screw-haha, you gotta love farm trucks!so the rotor was tearing the sh*t out of the cap since itwas just loose on there! new cap rotor, and wires made it run tons better, tomorrow I chase that pesky acellerator pump, and time it, and it might run like new!
__________________
60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955 |
|
|
|
06-21-2010, 09:01 AM
|
#1446 | |
|
Registered User
Join Date: Nov 2008
Location: Houston TX
Posts: 362
|
Re: What did you do to your truck today?
Quote:
http://www.por15.com/ malibob, im digin that seat. did you recover it?
__________________
The price of cool aint cheap. |
|
|
|
|
06-21-2010, 09:54 AM
|
#1447 |
|
Registered User
Join Date: Jun 2010
Location: Georgetown,Tx
Posts: 12
|
Re: What did you do to your truck today?
Found low oil pressure after engine warm up.... pulled the motor only to find out more bad news. Cam bearings shot, main bearings shot, # 7 piston wall no bueno.
|
|
|
|
06-21-2010, 10:18 AM
|
#1448 | |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,446
|
Re: What did you do to your truck today?
Quote:
http://www.windshieldstogo.com/ They have warehouses throughout the US that you can pick the glass up and save shipping. |
|
|
|
|
06-21-2010, 12:53 PM
|
#1449 |
|
Sunburst C10!!!
Join Date: Jan 2009
Location: Texas
Posts: 2,560
|
Re: What did you do to your truck today?
thanks
__________________
Gage 1967 C10 Shortbed Stepside |
|
|
|
06-21-2010, 08:53 PM
|
#1450 |
|
Registered User
Join Date: Apr 2009
Location: smyrna tn
Posts: 221
|
Re: What did you do to your truck today?
Replaced the ignition switch and the starter solenoid trying to sort out my starting problems only to discover the wire plug next to the heater box was unplugged the whole time!
 I thought about taking both parts back but I didn't feel like uninstalling them plus they were cheap and they'll probably last another 43 years anyway. Last edited by rendus; 06-21-2010 at 08:57 PM. |
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
