|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-20-2010, 06:19 PM
|
#1 |
|
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
In need some measurments
I sure could use some help.
I need someone with 56" real leaf springs to measure from front hanger to rear hanger. Doesn't matter where you measure from as long as you can tell/show me what point on the front to what point on the rear you measured. I sold my '80 short bed now I don't have anything to go by while changing my crew to 56" springs. Thanks!!
__________________
 CHEVY ONLY
|
|
|
|
07-20-2010, 06:37 PM
|
#2 |
|
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: In need some measurments
burb or pick-up either one will work....
__________________
CHEVY ONLY
|
|
|
|
|
07-20-2010, 06:52 PM
|
#3 |
|
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
Re: In need some measurments
Just move the rear hangers back...there are already holes on the frame for them. Also, if you have sport bumper brackets on the frame...the rear hangers butt up nicely to them.
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
|
|
|
|
07-20-2010, 07:07 PM
|
#4 |
|
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,684
|
Re: In need some measurments
55-3/8" from the center of the front hanger bolt to the center of the rear hanger bolt. The bolts that run through the springs, that is.
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE |
|
|
|
|
07-20-2010, 07:25 PM
|
#5 | ||
|
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: In need some measurments
Quote:
I looked and didn't see any holes further back. Quote:
So, just to be clear in my mind, that measurement is from the front hanger spring bolt hole to the rear hanger shackle bolt hole?
__________________
CHEVY ONLY
|
||
|
|
|
|
07-20-2010, 07:39 PM
|
#6 |
|
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,684
|
Re: In need some measurments
Sorry, yes, the rear is measured to the hole in the hanger itself, where the shackle bolt goes through, NOT the spring bolt.
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 07-20-2010 at 07:41 PM. |
|
|
|
|
07-20-2010, 08:35 PM
|
#7 | |
|
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: In need some measurments
Quote:
That's exactly what I needed! Thanks again Bob! 
__________________
CHEVY ONLY
|
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
