Finally Making some progress! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Juiced06GTO · 09-13-2010, 08:45 PM

Should be ready to fire this weekend, keeping my fingers crossed!

Some progress!

**Thealien** · 09-13-2010, 09:35 PM

Good luck with the start up. Has everything gone acording to plan so far?

Juiced06GTO · 09-14-2010, 07:14 AM

So far everything is pretty close. I am missing a fitting for the return on the power steering box that I can't seem to track down any where locally. The radiator is a little bigger than ideal, but it will work for now. I need to fab up some mounts for it, get the radiator hoses, fill everything with fluids, pop in the fuses for everything, get a serpentine belt, and fire it off.

I have HP Tuners, so I'll need to delete the VATS and rear 02 codes, but other then that it is close!

Super73 · 09-14-2010, 11:30 AM

IMO, get a wideband and delete the front O2's as well, toss the MAF in the garbage and tune her in Speed Density.

Juiced06GTO · 09-14-2010, 12:26 PM

Speed denisity would be nice, but I have all the stuff to run it with the maf. I run my gto with the maf still and haven't had any issues.

Super73 · 09-14-2010, 04:33 PM

Don't take what I said as ther eis a "problem" with the MAF, I have just personally seen gains power wise with out it with little to no sacrifice in drivability.

Juiced06GTO · 09-14-2010, 05:41 PM

Oh I hear ya. Right now I just want to get this thing running haha. I may end up going that way in the future. My buddy who is a well respected tuner up here in the NE suggested that if I go anymore aggressive with the cam in my car then I should think about going speed density too. I also have a few buddies with sc cars who are all SD tuned and their cars drive great. Right now I am more concerned with getting the truck running so I can use it to tow my car back to the track haha!

68GMCCustom · 09-14-2010, 06:01 PM

so which LSx is that? 5.3? 6.0? 6.2? 7....nah.

Juiced06GTO · 09-14-2010, 09:26 PM

It's a measly lil 5.3. It is going to be my daily driver/tow vehicle for my 06 GTO. I drag race the gto, I don't need to race the truck!! Although I did tell my wife she will have to drive the truck down the track so I can do some tuning.....

I do have a bare ls1 block and bare 6.0 block in my shed just waiting to be built. The GTO gets the first new motor though, its been 11.18, I'd like to get it well into the tens before abandoning the stock ls2.

09-13-2010, 08:45 PM	#1
Juiced06GTO Registered User Join Date: Jul 2010 Location: Sutton, MA Posts: 130	Finally Making some progress! Should be ready to fire this weekend, keeping my fingers crossed! Some progress!

09-13-2010, 09:35 PM	#2
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Finally Making some progress! Good luck with the start up. Has everything gone acording to plan so far? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

09-14-2010, 07:14 AM	#3
Juiced06GTO Registered User Join Date: Jul 2010 Location: Sutton, MA Posts: 130	Re: Finally Making some progress! So far everything is pretty close. I am missing a fitting for the return on the power steering box that I can't seem to track down any where locally. The radiator is a little bigger than ideal, but it will work for now. I need to fab up some mounts for it, get the radiator hoses, fill everything with fluids, pop in the fuses for everything, get a serpentine belt, and fire it off. I have HP Tuners, so I'll need to delete the VATS and rear 02 codes, but other then that it is close!

09-14-2010, 11:30 AM	#4
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Finally Making some progress! IMO, get a wideband and delete the front O2's as well, toss the MAF in the garbage and tune her in Speed Density. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49 Last edited by Super73; 09-14-2010 at 11:30 AM.

09-14-2010, 12:26 PM	#5
Juiced06GTO Registered User Join Date: Jul 2010 Location: Sutton, MA Posts: 130	Re: Finally Making some progress! Speed denisity would be nice, but I have all the stuff to run it with the maf. I run my gto with the maf still and haven't had any issues.

09-14-2010, 04:33 PM	#6
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Finally Making some progress! Don't take what I said as ther eis a "problem" with the MAF, I have just personally seen gains power wise with out it with little to no sacrifice in drivability. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

09-14-2010, 05:41 PM	#7
Juiced06GTO Registered User Join Date: Jul 2010 Location: Sutton, MA Posts: 130	Re: Finally Making some progress! Oh I hear ya. Right now I just want to get this thing running haha. I may end up going that way in the future. My buddy who is a well respected tuner up here in the NE suggested that if I go anymore aggressive with the cam in my car then I should think about going speed density too. I also have a few buddies with sc cars who are all SD tuned and their cars drive great. Right now I am more concerned with getting the truck running so I can use it to tow my car back to the track haha!

09-14-2010, 06:01 PM	#8
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Finally Making some progress! so which LSx is that? 5.3? 6.0? 6.2? 7....nah. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

09-14-2010, 09:26 PM	#9
Juiced06GTO Registered User Join Date: Jul 2010 Location: Sutton, MA Posts: 130	Re: Finally Making some progress! It's a measly lil 5.3. It is going to be my daily driver/tow vehicle for my 06 GTO. I drag race the gto, I don't need to race the truck!! Although I did tell my wife she will have to drive the truck down the track so I can do some tuning..... I do have a bare ls1 block and bare 6.0 block in my shed just waiting to be built. The GTO gets the first new motor though, its been 11.18, I'd like to get it well into the tens before abandoning the stock ls2.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.