1990 2WD 1/2ton 14 Bolt Rear End - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trenchwarfare · 09-21-2010, 06:39 PM

It seems as if nearly everything is shot in it. What axle can I use to replace it? I know of a friend who has a frame and axles from a 97 GM 3500. I wouldn't mind as they come with the rims. Would I be able to easily mount the rear axle or should I look somewhere completely different?

BigBlocksRule · 09-21-2010, 07:41 PM

Take a few measurements to be sure dimensions are the same, both on the rearend and frame. My guess is that it'll work and be a fairly easy bolt-up.

09-21-2010, 06:39 PM	#1
trenchwarfare Registered User Join Date: Nov 2008 Location: WNY Posts: 313	1990 2WD 1/2ton 14 Bolt Rear End It seems as if nearly everything is shot in it. What axle can I use to replace it? I know of a friend who has a frame and axles from a 97 GM 3500. I wouldn't mind as they come with the rims. Would I be able to easily mount the rear axle or should I look somewhere completely different? __________________ ____________________________________

09-21-2010, 07:41 PM	#2
BigBlocksRule Registered User Join Date: Jun 2008 Location: Lubbock, TX Posts: 2,047	Re: 1990 2WD 1/2ton 14 Bolt Rear End Take a few measurements to be sure dimensions are the same, both on the rearend and frame. My guess is that it'll work and be a fairly easy bolt-up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.