NE ROLL PAN - 92-99 Burb/Tahoe - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68C10HotRod · 09-27-2010, 12:43 PM

I have a NEVER INSTALLED, Sir Michaels METAL bolt in roll pan that fits 92-99 Suburban & Tahoe trucks. Had a 99 Tahoe that was going to get it but just never got around to it. Trucks been gone for 4 years now!!

These things go BRAND NEW for about $160-175 (can't remember) but I want to move this so $50 + shipping & it's YOURS. The surface rust is just from handling it ages ago but should smooth right out. I take paypal. Ready to ship.

What it looks like installed

70BLAZERX2 · 09-27-2010, 08:22 PM

how much to ship to 37745 east tennessee? 1st in line please.

noahdallas · 09-27-2010, 09:20 PM

Is that the light kit on the back? I will 2nd in line please pending shipping to Irving, TX 75061. thanks!!!!

68C10HotRod · 09-27-2010, 09:47 PM

I'll check on shipping tomorrow. The box is in storage & dimensions I wrote down are killing the shipping - need to confirm them. Might be cheaper to do Greyhound than UPS. If you'd be willing to pick up at a depot, lmk what town is closest.

To answer noahdallas, yes that is the light kit & screw kit for installation.

Sorry for the delay.

70BLAZERX2 · 09-28-2010, 08:32 AM

greyhound will be johnson city TN or bristol TN Check ups also..they will come here. if not to much different..Please let me know,Thanks.

I do have paypal.

68C10HotRod · 09-28-2010, 01:12 PM

This is MUCH better. I was off 10" on just one of the dimensions & it was making it $120 to ship. With correct ones (71x14x7@17#), UPS is $40 so that's $90 total. If you want it, shoot me a PM with your full mailing address & I'll send you my Paypal info. I can get it out as soon as I get payment. Thanks.

70BLAZERX2 · 09-28-2010, 05:49 PM

pm sent,thank you

PT'S 70 CST · 09-28-2010, 09:44 PM

Will this pan fit an 88-98 fleet truck. I am thinking that it will not but I cannot remember.

PT

68C10HotRod · 09-28-2010, 11:55 PM

I'm not sure if they will but that's how 70BlazerX2 is going to use it. He mentioned something about slight modifications so I'm not sure how much that entails. He might be able to answer with better details.

70BLAZERX2 · 09-29-2010, 08:14 AM

when i get it here..i will post full pics on mods and info on install..

paypal will be sent around noon today..Thank you.

PT'S 70 CST · 09-29-2010, 03:52 PM

Thanks 70BLAXERX2 I have one on my truck now but have another bed that I am going to install another pan on and start the body work on so when I get ready to paint my truck the bed and pan will be done and I am just going to swap beds.

Thanks PT

70BLAZERX2 · 09-29-2010, 06:04 PM

I did look and the tahoe/burb rear bumper and brackets are the same as the pickup..so it should not be all that hard..

09-27-2010, 12:43 PM	#1
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	ROLL PAN - 92-99 Burb/Tahoe I have a NEVER INSTALLED, Sir Michaels METAL bolt in roll pan that fits 92-99 Suburban & Tahoe trucks. Had a 99 Tahoe that was going to get it but just never got around to it. Trucks been gone for 4 years now!! These things go BRAND NEW for about $160-175 (can't remember) but I want to move this so $50 + shipping & it's YOURS. The surface rust is just from handling it ages ago but should smooth right out. I take paypal. Ready to ship. What it looks like installed __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery) Last edited by 68C10HotRod; 09-27-2010 at 12:45 PM. Reason: added install pic

09-27-2010, 08:22 PM	#2
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: ROLL PAN - 92-99 Burb/Tahoe how much to ship to 37745 east tennessee? 1st in line please.

09-27-2010, 09:20 PM	#3
noahdallas Registered User Join Date: Jul 2005 Location: Dallas, TX Posts: 324	Re: ROLL PAN - 92-99 Burb/Tahoe Is that the light kit on the back? I will 2nd in line please pending shipping to Irving, TX 75061. thanks!!!! Last edited by noahdallas; 09-27-2010 at 09:20 PM.

09-27-2010, 09:47 PM	#4
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: ROLL PAN - 92-99 Burb/Tahoe I'll check on shipping tomorrow. The box is in storage & dimensions I wrote down are killing the shipping - need to confirm them. Might be cheaper to do Greyhound than UPS. If you'd be willing to pick up at a depot, lmk what town is closest. To answer noahdallas, yes that is the light kit & screw kit for installation. Sorry for the delay. __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

09-28-2010, 08:32 AM	#5
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: ROLL PAN - 92-99 Burb/Tahoe greyhound will be johnson city TN or bristol TN Check ups also..they will come here. if not to much different..Please let me know,Thanks. I do have paypal.

09-28-2010, 01:12 PM	#6
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: ROLL PAN - 92-99 Burb/Tahoe This is MUCH better. I was off 10" on just one of the dimensions & it was making it $120 to ship. With correct ones (71x14x7@17#), UPS is $40 so that's $90 total. If you want it, shoot me a PM with your full mailing address & I'll send you my Paypal info. I can get it out as soon as I get payment. Thanks. __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

09-28-2010, 05:49 PM	#7
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: ROLL PAN - 92-99 Burb/Tahoe pm sent,thank you

09-28-2010, 09:44 PM	#8
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: ROLL PAN - 92-99 Burb/Tahoe Will this pan fit an 88-98 fleet truck. I am thinking that it will not but I cannot remember. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

09-28-2010, 11:55 PM	#9
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: ROLL PAN - 92-99 Burb/Tahoe I'm not sure if they will but that's how 70BlazerX2 is going to use it. He mentioned something about slight modifications so I'm not sure how much that entails. He might be able to answer with better details. __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

09-29-2010, 08:14 AM	#10
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: ROLL PAN - 92-99 Burb/Tahoe when i get it here..i will post full pics on mods and info on install.. paypal will be sent around noon today..Thank you.

09-29-2010, 03:52 PM	#11
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: ROLL PAN - 92-99 Burb/Tahoe Thanks 70BLAXERX2 I have one on my truck now but have another bed that I am going to install another pan on and start the body work on so when I get ready to paint my truck the bed and pan will be done and I am just going to swap beds. Thanks PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

09-29-2010, 06:04 PM	#12
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: ROLL PAN - 92-99 Burb/Tahoe I did look and the tahoe/burb rear bumper and brackets are the same as the pickup..so it should not be all that hard..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.