The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Tools, Shops and Shop Safety

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-05-2010, 10:20 PM   #1
steemin_ehman
False Lies
 
steemin_ehman's Avatar
 
Join Date: Feb 2006
Location: Esterhazy, SK
Posts: 305
Shop heater - dont know where to post?

Hey, I was wondering what you guys were using as a shop/garage heater in the winter time (as cold as -35 C, or -31 F). If it's efficient, what works best, cost of installation, etc. I just aquired a garage (finally possession Nov. 24) that is 22ft x 20ft (hardly big enough... but big enough for one project at a time....)

Is a radiant heater, or forced air better? Gas or electric? Oversized or just big enough? Run it all winter long, or just when in the garage? The garage is fully insulated.

Sorry for all the questions guys, but I gotta start somewhere!! Thanks in advance for any input!!
__________________
Kyle (Steemin) Ehman

-1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO"
-2015 Yukon XL Denali (Family ride)
-1977 Chevy stepside, carb'ed vortec 350 (SOLD)
-Father of three daughters who will also have something cool...
steemin_ehman is offline   Reply With Quote
Old 11-05-2010, 10:30 PM   #2
old Rusty C10
Robert Olson Transport
 
old Rusty C10's Avatar
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
Re: Shop heater - dont know where to post?

well at least i helped you out with where to post
__________________
Bob



1951 International running on a squarebody chassis


"If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board"
http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!)


PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport

Live each day to the fullest.. you never know when fate is going to pull the rug out from under you...
I hate cancer!!
old Rusty C10 is offline   Reply With Quote
Old 11-05-2010, 10:42 PM   #3
steemin_ehman
False Lies
 
steemin_ehman's Avatar
 
Join Date: Feb 2006
Location: Esterhazy, SK
Posts: 305
Re: Shop heater - dont know where to post?

Quote:
Originally Posted by old Rusty C10 View Post
well at least i helped you out with where to post
lol thanks for that!
__________________
Kyle (Steemin) Ehman

-1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO"
-2015 Yukon XL Denali (Family ride)
-1977 Chevy stepside, carb'ed vortec 350 (SOLD)
-Father of three daughters who will also have something cool...
steemin_ehman is offline   Reply With Quote
Old 11-05-2010, 10:55 PM   #4
cayoterun
Junior Member
 
cayoterun's Avatar
 
Join Date: Dec 2006
Location: Guymon, Oklahoma
Posts: 2,040
Re: Shop heater - dont know where to post?

I have a 30 X 56 X 12H shop and use a 100,000BTU overhead radiant gas heater. Never heat more than 60 degrees so no need to be adding clothes when going outside. Set thermostat on 40 at night, and store anything that might freeze under it. It won't heat the whole barn that warm, but stays nice and warm near or under it. What I like is it heats objects, not air. Works great in our windy, cold weather. Our weather is not as extreme as yours, but similar.
Don't know how much gas it uses, as we get free natural gas from wells on our place. Gas companies don't write those leases anymore, but our lease was signed in 1939. I really like the heaters in any outside buildings we need to heat.
I've used radiant LP heaters that mount on top of small LP bottles in small places and point them at where I'm working. They seem to be pretty easy on gas and work good when your in front of them. Whatever you use, I vote radiant.
My .002
Cayoterun
__________________
Cayoterun
Okla. Panhandle

I think I'll do it myself and pay the extra $500.

Last edited by cayoterun; 11-05-2010 at 11:04 PM.
cayoterun is offline   Reply With Quote
Old 11-06-2010, 12:02 AM   #5
69subaru360
Registered User
 
69subaru360's Avatar
 
Join Date: Jul 2010
Location: Fleetwood PA
Posts: 38
Re: Shop heater - dont know where to post?

My garage is 16x24. I have a 40,000 btu propane bullet heater. It gets hot enough that you can work in a t shirt in 20 degree weather. I turn it off after a while usually. I have a 100 lb tank and I usually fill it 2-3 times a winter. I work in the garage 2 or 3 days a week usually for 5 or 6 hours a day.
69subaru360 is offline   Reply With Quote
Old 11-06-2010, 12:55 AM   #6
grmrepr
Registered User
 
grmrepr's Avatar
 
Join Date: Sep 2009
Location: Poteau, Oklahoma
Posts: 127
Re: Shop heater - dont know where to post?

my shop is a 22 x 24 and i use a wood burning stove, I love the smell of wood burning in the winter time and it keeps me pretty warm
__________________
"First off I'm an OKIE.... so don't call me Tex!"

1985 Chevy C-10 SWB 305
looking for posi rearend
2003 GMC Sonoma (DD)
1999 GMC Sierra 4x4 327 (Out Of Commission)
1999 Pontiac Grand Prix GTP Supercharged
2004 Chevy Malibu (Wife's Hot Rod)
grmrepr is offline   Reply With Quote
Old 11-06-2010, 01:12 PM   #7
steemin_ehman
False Lies
 
steemin_ehman's Avatar
 
Join Date: Feb 2006
Location: Esterhazy, SK
Posts: 305
Re: Shop heater - dont know where to post?

Quote:
Originally Posted by grmrepr View Post
my shop is a 22 x 24 and i use a wood burning stove, I love the smell of wood burning in the winter time and it keeps me pretty warm
wood burning stove equals big insurance costs since the garage is attached to my house... so thats already out of the question. But I really love the smell of wood burning in the winter as well.
__________________
Kyle (Steemin) Ehman

-1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO"
-2015 Yukon XL Denali (Family ride)
-1977 Chevy stepside, carb'ed vortec 350 (SOLD)
-Father of three daughters who will also have something cool...
steemin_ehman is offline   Reply With Quote
Old 11-06-2010, 01:42 PM   #8
BarryB
Senior Member
 
BarryB's Avatar
 
Join Date: Jul 2006
Location: Blountville, Tn.
Posts: 3,904
Re: Shop heater - dont know where to post?

I just picked my up this morning, got myself a woodstove. In my area fire wood is readily available, and isn't all that expensive, also my parents have 26-27 acres of mostly woods, so I should have plenty of firewood. Love the heat a wood burner puts out.
__________________
*We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box.

* You may be only one person in the world, But you may also be the world to one person.

* Some mistakes are too much fun to only make once.

Two rules in life.
1. Never sweat the small stuff!
2. Everything is small stuff!
BarryB is offline   Reply With Quote
Old 11-06-2010, 03:16 PM   #9
Richard H.
Spanked once
 
Richard H.'s Avatar
 
Join Date: Oct 2006
Location: Intheshop, Indiana
Posts: 969
Re: Shop heater - dont know where to post?

The last pic in this link is how I heat. Maxx heater, propane but can be natural gas. Worth every penny and safely vented.
http://67-72chevytrucks.com/vboard/s...2&postcount=11
__________________
The ole 350 budget build.

Last edited by Richard H.; 11-06-2010 at 03:16 PM.
Richard H. is offline   Reply With Quote
Old 11-06-2010, 04:26 PM   #10
Hottrucks
Redefining LowBudget
 
Hottrucks's Avatar
 
Join Date: Mar 2009
Location: lebanon Cow Hampshire
Posts: 4,538
Re: Shop heater - dont know where to post?

My garage is also attacted to the house I have an old trailer (moble home) gas furnace on a thermostat....it works very well is 120 volt and an easy install and cheap/easy to find...as far as how much you plan to be out there....I ussually run it for 15/20 min before I go out and it heats up well...all so will depend on your insolation...if I'm going to be out there again the next day I'll set it to 40/45
Hottrucks is offline   Reply With Quote
Old 11-06-2010, 10:08 PM   #11
hayhauler71
Registered User
 
hayhauler71's Avatar
 
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
Re: Shop heater - dont know where to post?

I have a 22x28 insulated shop and use a modine 90000 btu natural gas unit heater. I leave it set at 45 and when i work out there i turn it up to 70. Doesn't run much if you keep it on since everything is warm. cost about $25.00 a month to run.
__________________
Fuzzy
hayhauler71 is offline   Reply With Quote
Old 11-06-2010, 10:38 PM   #12
Notch1988
Registered User
 
Notch1988's Avatar
 
Join Date: Aug 2009
Location: Lacombe, Alberta
Posts: 335
Re: Shop heater - dont know where to post?

I have a 80000 btu natural gas overhead radiant tube heater in a 24X40 garage. I'm not a big fan of the forced air heaters being noisy and blowing on you all the time. My heaters nice and quiet. But, you'll want a tall garage or you'll burn the top of your head with an overhead radiant. My climate is fairly close to yours LOL.

Last edited by Notch1988; 11-06-2010 at 10:39 PM.
Notch1988 is offline   Reply With Quote
Old 11-06-2010, 10:51 PM   #13
chevy_man5
GMC's n H.D.'s too!
 
chevy_man5's Avatar
 
Join Date: Oct 2010
Location: Nampa, Idaho
Posts: 1,583
Re: Shop heater - dont know where to post?

My daughter and I just installed a woodstove (that we got for free) today. I found some triple wall chimney pipe on Craigslist for $50. Haven't tried it out yet. But it should bake us out of the garage. Its as big as my dad used to heat our house in Wisconsin, and the garage is only a 2 car.
chevy_man5 is offline   Reply With Quote
Old 11-09-2010, 10:34 PM   #14
chevy_man5
GMC's n H.D.'s too!
 
chevy_man5's Avatar
 
Join Date: Oct 2010
Location: Nampa, Idaho
Posts: 1,583
Re: Shop heater - dont know where to post?

This is the woodstove we installed. It took the garage from 53 degrees to 70 in about an hour, using some scrap 2x4's. It is brick lined, so radiated heat for a couple of hours after. It was NICE!!
Attached Images
  
chevy_man5 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com