|
11-11-2010, 01:52 AM
|
#1 |
|
Registered User
Join Date: Nov 2010
Location: st louis, mo
Posts: 1
|
86 K20 Hood latch
Hood latch release cable broke on my 86 K20. Any ideas for getting the hood up? Never happened to me before... (Hooking the latch blind with a wire requires me to know where the original cable hooks first)
|
|
|
|
11-11-2010, 10:06 AM
|
#2 |
|
Registered User
Join Date: Jun 2010
Location: windsor
Posts: 290
|
Re: 86 K20 Hood latch
If it broke under the hood you have to take off your drivers side inner fender, once that is off pull on the cable with a pair of vice grips. The cable itself runs along the top of the rad cradle and through a hole close to the drivers side fender on top. If it broke ontop of the rad cradle you will have to burn the bolts for the latch out with a torch. ****ty situation but Good luck !
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
