MS sanden compressor bracket 350 vortec heads driver side - The 1947 - Present Chevrolet & GMC Truck Message Board Network

60apache · 12-01-2010, 10:22 PM

I have a vintage ac sanden compressor bracket to mount the compressor on the driver side with vortec heads. vintage does not make a bracket for this application but this one has been modified to work. 50.00 shipped.

BigGoofy · 07-12-2012, 01:34 PM

Any chance you still have this?

I swapped from the stock 350 in my '84 to a carbed vortec head 350 and all pulleys/brackets swapped perfectly except the a/c compressor bracket. The bracket doesn't work now because the different vortec intake bolt pattern.

12-01-2010, 10:22 PM	#1
60apache Registered User Join Date: Mar 2010 Location: brandon, ms Posts: 385	sanden compressor bracket 350 vortec heads driver side I have a vintage ac sanden compressor bracket to mount the compressor on the driver side with vortec heads. vintage does not make a bracket for this application but this one has been modified to work. 50.00 shipped. Attached Images Last edited by 60apache; 12-01-2010 at 10:25 PM. Reason: pic

07-12-2012, 01:34 PM	#2
BigGoofy Registered User Join Date: Jul 2012 Location: College Station, TX Posts: 1	Re: sanden compressor bracket 350 vortec heads driver side Any chance you still have this? I swapped from the stock 350 in my '84 to a carbed vortec head 350 and all pulleys/brackets swapped perfectly except the a/c compressor bracket. The bracket doesn't work now because the different vortec intake bolt pattern.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.