|
12-27-2010, 10:09 PM
|
#1 |
|
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Help Brake lines?????
OK I am going to do new brake lines from my two pot (newer) maser cylinder down to the stock lines.
So I need to know.... What size lines for the front from master to stock T at drivers frame rail? What size from master to pass side split for rear brakes? All the lines are stock and minus the master needing reducers and the plug for the pass side T fitting is what I need. I am going to take off the master and get the fittings for that when I get the lines. This is on my 65 chevy c10
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 12-27-2010 at 10:10 PM. |
|
|
|
12-27-2010, 10:52 PM
|
#2 |
|
Registered User
 Join Date: Nov 2009
Location: Longview, Texas
Posts: 775
|
Re: Help Brake lines?????
All mine are 3/16" for the fronts and 1/4" for the rears.
|
|
|
|
|
03-16-2011, 12:49 AM
|
#3 |
|
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Help Brake lines?????
Ok does anybody have a length for these two lines from master to t for rear and the same for the front please. I am going to get some tomarrow
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
|
|
|
|
03-16-2011, 01:02 AM
|
#4 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Help Brake lines?????
I don't recall your brake system, but if you have front discs you should have a proportioning valve in there somewhere.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
03-16-2011, 07:32 AM
|
#5 |
|
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Help Brake lines?????
The prop valve is going to be mounted right next to the master like working a few inches. So basically the length to the factory T's - 3" I can coil the line if need be. I'm getting real close to this thing moving on it's own but I need brakes... I'm going to see about my rotors Friday. Thanks Captainfab.
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
