My project 68 with an LS1 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vortech71chevy · 01-04-2011, 05:56 PM

Quote:

Originally Posted by jmuck

Here you go Veno.
Attachment 676082

Attachment 676083

Attachment 676084

ok stop it. this is insanity.

and amazing.

RCbowtie69 · 01-04-2011, 10:37 PM

NICE!!!! truck

Bulldog88 · 01-06-2011, 12:01 AM

The green truck came out street truck magazine i believe since I seen the truck they upgraded to a 6.0 with a carb

denny5625 · 01-06-2011, 01:19 AM

Damn nice truck!

sanford66 · 01-06-2011, 02:38 AM

Wow, very killer truck!! A lot of hours (and a few brewsky's too it looks like) have been put into that so far! Excellent fab work, hope to see some more progress pics. Joseph

VDOG · 01-07-2011, 04:14 AM

Quote:

Originally Posted by jmuck

Yea I built this out of some left over parts I had. A friend of mine through the bag away and the piston is from an old 454 I have, The bag bracket is off of a truck I redid the suspension on and the part that holds the can is left over from my 5" exhaust. I also bagged my motorcycle trailer.
Attachment 669177

Attachment 669178

Ok now your just showing off!!

J/K That motorcycle trailer is wicked!!

jmuck · 01-07-2011, 11:34 AM

I installed my fuel door/cap last night. It is a pop up flush mount cap for custom motorcycle tanks but it turned out to work pretty good.
Name: IMG00005-20110106-2039.jpg
Views: 2280
Size: 43.8 KB

Name: IMG00005-20110106-2039.jpg
Views: 2280
Size: 43.8 KB

Name: IMG00007-20110106-2040.jpg
Views: 1889
Size: 40.1 KB

Name: IMG00006-20110106-2040.jpg
Views: 1880
Size: 41.6 KB

I'm not gonna leave it chrome. I will paint it to match the truck.

**67cheby** · 01-07-2011, 11:47 AM

that is sweet !!

mcbassin · 01-07-2011, 12:09 PM

Quote:

Originally Posted by jmuck

I installed my fuel door/cap last night. It is a pop up flush mount cap for custom motorcycle tanks but it turned out to work pretty good.
I'm not gonna leave it chrome. I will paint it to match the truck.

This is a cool idea! Haven't seen this doen before either.

VA72C10 · 01-07-2011, 12:26 PM

Quote:

Originally Posted by mcbassin

This is a cool idea! Haven't seen this doen before either.

It is a cool mod...planned on doing it on my next project....here is the Link for a how-to from John Fabris back in 2006....

http://67-72chevytrucks.com/vboard/s...t=stake+pocket

twoodson · 01-14-2011, 05:43 PM

Dude you are just plain acting BAD now with the gas cap!!!!! Little small things like that is what I like to see. Keep it up Boss!

Jacfourteen · 01-15-2011, 02:51 AM

Rear shots with the bed on look bad a$$! You definitely put the tallest tire you could fit in there! Any taller and it would be sticking above the bedline

Painter D · 01-15-2011, 11:04 AM

Excellent work and craftsmanship.

**ms2335** · 02-11-2011, 04:48 PM

Awesome truck! looks great

jasonhall · 10-19-2011, 11:53 PM

Any updates?

longbed67 · 11-06-2011, 08:33 PM

I would like to see some more photos / parts lists and how you did the rear window!

jmuck · 11-07-2011, 11:16 AM

Well I finally got my frame air tight and got it at the sandblaster right now. I should have it out this week and then I will bodywork and paint the frame.

**67cheby** · 11-07-2011, 11:21 AM

without pics.....IT DIDNT HAPPEN !!

VA72C10 · 11-07-2011, 04:04 PM

Quote:

Originally Posted by jmuck

Well I finally got my frame air tight and got it at the sandblaster right now. I should have it out this week and then I will bodywork and paint the frame.

Looking forward to seeing this thing!

C20-67_N_MO · 11-08-2011, 07:27 PM

Very nice craftsmanship!

chevytruckluver · 11-08-2011, 11:30 PM

wow, just found this, nice work... subscribed now.

gringoloco · 11-09-2011, 10:51 AM

In.

jmuck · 11-09-2011, 11:04 AM

Quote:

Originally Posted by 67cheby

without pics.....IT DIDNT HAPPEN !!

Nothing to take pics of. I got everything in pieces right now but as soon as I get it back from the sandblaster and get some paint on it I'll post some up.

**67cheby** · 11-09-2011, 12:09 PM

lol....well ok then

longbed67 · 11-09-2011, 11:01 PM

I still am curious about this rear roll down window... I have been dreaming of doing this to the rear window of a classic even before owning the 67 and really am not sure how all of this would work. if you have any more details please spill the beans.

01-04-2011, 10:37 PM	#102
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: My project 68 with an LS1 NICE!!!! truck

01-06-2011, 12:01 AM	#103
Bulldog88 Registered User Join Date: Nov 2009 Location: DFW,TX Posts: 233	Re: My project 68 with an LS1 The green truck came out street truck magazine i believe since I seen the truck they upgraded to a 6.0 with a carb

01-06-2011, 01:19 AM	#104
denny5625 Registered User Join Date: Jul 2007 Location: Kennewick, WA Posts: 152	Re: My project 68 with an LS1 Damn nice truck! __________________ 66 el Camino 70 1/2 RS Z-28 71 C10 2wd 72 2 wd Blazer (2) 72 4 x 4 Blazers 88 24' Mirage 70 mph+ 08 Harley Night Train 08 Silverado 4d 4 x 4

01-06-2011, 02:38 AM	#105
sanford66 Registered User Join Date: Jun 2007 Location: Everest Ks Posts: 749	Re: My project 68 with an LS1 Wow, very killer truck!! A lot of hours (and a few brewsky's too it looks like) have been put into that so far! Excellent fab work, hope to see some more progress pics. Joseph __________________ 1970 Chevelle Nomad station wagon 1966 C-10 lwb,250-six,granny 4speed 1966 C-10 lwb,factory A/C,Custom Cab 1954 Delray 2-door sedan [rat rod project]

01-07-2011, 11:34 AM	#107
jmuck Registered User Join Date: Mar 2006 Location: Nacogdoches, Tx Posts: 167	Re: My project 68 with an LS1 I installed my fuel door/cap last night. It is a pop up flush mount cap for custom motorcycle tanks but it turned out to work pretty good. I'm not gonna leave it chrome. I will paint it to match the truck. Last edited by jmuck; 01-07-2011 at 11:36 AM.

01-07-2011, 11:47 AM	#108
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: My project 68 with an LS1 that is sweet !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-14-2011, 05:43 PM	#111
twoodson Registered User Join Date: Jul 2003 Location: Lancaster, TX Posts: 291	Re: My project 68 with an LS1 Dude you are just plain acting BAD now with the gas cap!!!!! Little small things like that is what I like to see. Keep it up Boss!

01-15-2011, 02:51 AM	#112
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: My project 68 with an LS1 Rear shots with the bed on look bad a$$! You definitely put the tallest tire you could fit in there! Any taller and it would be sticking above the bedline __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

01-15-2011, 11:04 AM	#113
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: My project 68 with an LS1 Excellent work and craftsmanship. __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

02-11-2011, 04:48 PM	#114
ms2335 Senior Member Join Date: Jan 2009 Location: glenmora. la Posts: 290	Re: My project 68 with an LS1 Awesome truck! looks great __________________ 65 Chevy C10 Short Fleet BBW 6.0L/4l80E 68 Chevy C10 SWB 6.0L/4L80E 84 Chevy C10 SWB 5.3/4l60E QA1 Suspension

10-19-2011, 11:53 PM	#115
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: My project 68 with an LS1 Any updates?

11-06-2011, 08:33 PM	#116
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: My project 68 with an LS1 I would like to see some more photos / parts lists and how you did the rear window! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

11-07-2011, 11:16 AM	#117
jmuck Registered User Join Date: Mar 2006 Location: Nacogdoches, Tx Posts: 167	Re: My project 68 with an LS1 Well I finally got my frame air tight and got it at the sandblaster right now. I should have it out this week and then I will bodywork and paint the frame.

11-07-2011, 11:21 AM	#118
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: My project 68 with an LS1 without pics.....IT DIDNT HAPPEN !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-08-2011, 07:27 PM	#120
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: My project 68 with an LS1 Very nice craftsmanship! __________________ Coming Soon: Project 1970 Country Truck



Register or Log In To remove these advertisements.

11-08-2011, 11:30 PM	#121
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: My project 68 with an LS1 wow, just found this, nice work... subscribed now. __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

11-09-2011, 10:51 AM	#122
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: My project 68 with an LS1 In. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-09-2011, 12:09 PM	#124
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: My project 68 with an LS1 lol....well ok then __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-09-2011, 11:01 PM	#125
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: My project 68 with an LS1 I still am curious about this rear roll down window... I have been dreaming of doing this to the rear window of a classic even before owning the 67 and really am not sure how all of this would work. if you have any more details please spill the beans. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.