Need a measurment please (K20 burb) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Psycho71 · 01-25-2011, 06:23 PM

Looking for a measurement from the center of the hub on the front to the top lip of the fender well? And any lift info on the vehicle this measurement is taken from? Mine is 24.5"

trying to determine if my burb has any lift or is on factory springs. I temporarily mounted some 35" tires on it, and it's sitting way high right now. I know it will, but the top of the core support is higher than I think it should be. Sorry, no pics.

Any help is appreciated.

jay

**N2TRUX** · 01-31-2011, 11:45 PM

Anyone?

Psycho71 · 02-01-2011, 03:19 PM

OK, here's a pic. Look like it has a lift to y'all?

85burb · 02-03-2011, 12:14 AM

Mine is not a true k20 but it has k20 axles now. I am not sure if mine is lifted tho. I can take measurment if you want me too. I would like to know if mine is lifted so when i order a lift i dont get same size. Yours looks to be lifted or these just sit really high.

blakeduren · 02-03-2011, 10:47 AM

Take some pictures of the front and rear leaf spings. That will help us tell you the amount of lift.

Psycho71 · 02-03-2011, 05:49 PM

Will get some more pics this weekend. It's too freakin' cold out there right now. LOL Us Texans are wusses when it comes to temps below 30. or this Texan is anyway.

Mr. 250r · 02-10-2011, 01:01 PM

do you mean the core support isn't sitting only on the rubber frame mount possible for body lift?
Posted via Mobile Device

Psycho71 · 02-10-2011, 11:05 PM

definitely no body lift present. The core support reference was just that, a reference point to how high the front end is.

01-25-2011, 06:23 PM	#1
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Need a measurment please (K20 burb) Looking for a measurement from the center of the hub on the front to the top lip of the fender well? And any lift info on the vehicle this measurement is taken from? Mine is 24.5" trying to determine if my burb has any lift or is on factory springs. I temporarily mounted some 35" tires on it, and it's sitting way high right now. I know it will, but the top of the core support is higher than I think it should be. Sorry, no pics. Any help is appreciated. jay __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels! Last edited by Psycho71; 01-25-2011 at 06:23 PM.

01-31-2011, 11:45 PM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Need a measurment please (K20 burb) Anyone? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-01-2011, 03:19 PM	#3
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: Need a measurment please (K20 burb) OK, here's a pic. Look like it has a lift to y'all? __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

02-03-2011, 12:14 AM	#4
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Need a measurment please (K20 burb) Mine is not a true k20 but it has k20 axles now. I am not sure if mine is lifted tho. I can take measurment if you want me too. I would like to know if mine is lifted so when i order a lift i dont get same size. Yours looks to be lifted or these just sit really high. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

02-03-2011, 10:47 AM	#5
blakeduren Registered User Join Date: Apr 2010 Location: Kansas City, MO Posts: 192	Re: Need a measurment please (K20 burb) Take some pictures of the front and rear leaf spings. That will help us tell you the amount of lift.

02-03-2011, 05:49 PM	#6
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: Need a measurment please (K20 burb) Will get some more pics this weekend. It's too freakin' cold out there right now. LOL Us Texans are wusses when it comes to temps below 30. or this Texan is anyway. __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

02-10-2011, 01:01 PM	#7
Mr. 250r Registered User Join Date: Dec 2010 Location: freeburg, illinois Posts: 885	Re: Need a measurment please (K20 burb) do you mean the core support isn't sitting only on the rubber frame mount possible for body lift? Posted via Mobile Device

02-10-2011, 11:05 PM	#8
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: Need a measurment please (K20 burb) definitely no body lift present. The core support reference was just that, a reference point to how high the front end is. __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.