What mount to use? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 01-30-2011, 12:56 PM

All i currently have with my blazer is the original V8 perches. I don't have the clam shells or anything that bolts to a motor. I would like a mount that will allow me to use the A/C condensor without cutting the frame. I will be using the ls motor with the truck intake. What would be my best option for mounts?

trkfrk · 01-30-2011, 02:29 PM

Here is a picture of the mounts I am using. Engine mount conversion kit Part # 16820, polyurethane mount pad # 7-509-BL. These are Tuckers Classic auto part numbers.

**Clyde65** · 01-30-2011, 06:37 PM

ECE makes a very good product that would work well with your swap.

http://www.earlyclassic.com/catalog....ry=New%20Items

basemodel67 · 02-03-2011, 01:41 AM

I think I'm going to find a way to use the new Camaro mounts... at least the part that bolts to the block. Seems like it would be a cleaner way to install an LS engine and give more room for headers.

**Clyde65** · 02-03-2011, 10:58 AM

I have the ones shown above. They work real well and allowed me to use the Sanderson Headers, the ECE mounts mount from under kind of and will allow for exhaust better IMO.

01-30-2011, 12:56 PM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	What mount to use? All i currently have with my blazer is the original V8 perches. I don't have the clam shells or anything that bolts to a motor. I would like a mount that will allow me to use the A/C condensor without cutting the frame. I will be using the ls motor with the truck intake. What would be my best option for mounts? __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

01-30-2011, 02:29 PM	#2
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: What mount to use? Here is a picture of the mounts I am using. Engine mount conversion kit Part # 16820, polyurethane mount pad # 7-509-BL. These are Tuckers Classic auto part numbers. __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

01-30-2011, 06:37 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: What mount to use? ECE makes a very good product that would work well with your swap. http://www.earlyclassic.com/catalog....ry=New%20Items __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-03-2011, 01:41 AM	#4
basemodel67 Factory Strippers Rule! Join Date: Mar 2009 Location: Shingle Springs, CA Posts: 707	Re: What mount to use? I think I'm going to find a way to use the new Camaro mounts... at least the part that bolts to the block. Seems like it would be a cleaner way to install an LS engine and give more room for headers. __________________ "Feast your eyes on a feast of smoke." 67 Chevy Short Fleet PLAN: LQ9, 4L60, D60 Looking for School Bus Gauges - Help me out!

02-03-2011, 10:58 AM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: What mount to use? I have the ones shown above. They work real well and allowed me to use the Sanderson Headers, the ECE mounts mount from under kind of and will allow for exhaust better IMO. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.