has anyone tryed bolting the 2wd cross member to a 4wd frame

[chevy89blazer]

i got an 1989 k5 and i also have a 1985 2wd truck that i want to take the 2wd cross member off and put on my blazer

[PBFAB.COM]

It's a pretty common conversion... there should be some threads around here somewhere that you could reference. There are no holes in the 4WD rails for the 2wd x-member, but with careful measuring and a drill you should be able to get it all bolted up.

[chevy89blazer]

ive been looking but cant find where anyone has done it on here im probably just not looking in the right place

[edflores]

When you figure it out, let me know.

[chevy89blazer]

there is a thread on here where a guy took a 4x4 blazer and a 2wd truck and swaped them lots of good pictures it looks easy to swap the front members to me

[lakeroadster]

Here is the thread you are looking for.

http://67-72chevytrucks.com/vboard/s...d.php?t=168231

[sixty8c10]

yep, thats my handy work.....Its been a long time since I completed the swap, and I no longer have the Blazer, but if you have any questions I will try to answer them from memory as best as I can.

[bluex]

I put alot of info in this thread for you, that you also started in the 73-87 blazer/sub section. For everyone else, check it out here:

http://67-72chevytrucks.com/vboard/s...d.php?t=442573

[chevy89blazer]

is there any holes on the 2wd cross member that line up with the hole on the 4wd frame

[edflores]

I dont think so...

[sixty8c10]

no