MN 1967 truck remains. Slim pickins.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 02-20-2011, 11:10 PM

Getting close to crusher time and thought i would check in with what is left. If you see something, ask and i will price it.
Inside heater box, $40
Wiper motor, $25
Throttle linkage and pedal rod, $20
2 bbl carb, $20 (7024106)
67 ram assist steering with pump, $150
All are plus shipping or local pickup.

68chevyfuelie · 02-20-2011, 11:58 PM

Is the carb a Rochester?

**too much stuff** · 02-21-2011, 12:47 AM

I will check tomorrow, but i believe it is a 2jet.

67-1sttimer · 02-21-2011, 01:09 AM

Is the rubber floor mat worth cleaning and re-using? Price with shipping. 75150 TX Chris.

**too much stuff** · 02-21-2011, 01:12 AM

Quote:

Originally Posted by 67-1sttimer

Is the rubber floor mat worth cleaning and re-using? Price with shipping. 75150 TX Chris.

I will look tomorrow, but i will guess not.

67-1sttimer · 02-21-2011, 01:19 AM

If it would work well under a carpet i might be able to use it.

rich67 · 02-21-2011, 02:40 AM

driver side fender gone? any good? either? thanx rich

classic1967chevy · 02-21-2011, 02:49 AM

Quote:

Originally Posted by too much stuff

I will look tomorrow, but i will guess not.

hey if you still have that rubber floor mat i would like it oh and the tail lights and backup lights how much would it be ???

Robert Paul Thomas · 02-21-2011, 09:58 AM

Eric, I need the clips that hold the tail light and back up lights in, they are U shaped and they slide over the sheet metal.

**too much stuff** · 02-21-2011, 02:37 PM

67-1sttimer there is a tear on the drivers side. $20 plus shipping.
Rich 67, the roof is the only good panel...
Classic67chevy, you are second in line on the mat.
Rob, sorry, no box on this truck.
68chevyfuelie, i added a pic for you.

68chevyfuelie · 02-21-2011, 02:50 PM

Can you include throttle linkage/springs/clips etc.? This will be for a project down the road, all the little bits are nice to have. Does the carb butterfly still open, or is it seized? Thanks.

Robert Paul Thomas · 02-21-2011, 04:07 PM

windshild stainless??

**too much stuff** · 02-21-2011, 04:35 PM

Quote:

Originally Posted by Robert Paul Thomas

windshild stainless??

That is in my roof and seat thread as someone asked about it there. Check that out.

jay_shy · 02-21-2011, 06:14 PM

The throttle pedal and rod from the pedal to the cab - does this include the hardware to connect it to the carb. If so price shipped to 16635.

Thanks
Jason

**too much stuff** · 02-21-2011, 06:27 PM

Quote:

Originally Posted by jay_shy

The throttle pedal and rod from the pedal to the cab - does this include the hardware to connect it to the carb. If so price shipped to 16635.

Thanks
Jason

Lets see what 68chevy needs and you will be up second.

67-1sttimer · 02-21-2011, 08:09 PM

Will you take $25 shipped on that floor mat? Thanks Chris.

**too much stuff** · 02-21-2011, 10:45 PM

Quote:

Originally Posted by 67-1sttimer

Will you take $25 shipped on that floor mat? Thanks Chris.

Nope, can't go that cheap.

**too much stuff** · 02-22-2011, 02:18 PM

Pic for 68chevyfuelie. $35 plus shipping for all pictured. All the plates move fine. Let me know.

67-1sttimer · 02-22-2011, 02:44 PM

Ok thanks, ill pass it to the nxt guy interested. Chris.

projectjimmie68 · 02-22-2011, 05:06 PM

How is the cab floor?( The areas around where the outer seat belts bolt down.) All the way to the corners

**too much stuff** · 02-22-2011, 10:43 PM

Classic1967, you are up on the mat...
Projectjimmie. Rusty...

**too much stuff** · 02-24-2011, 02:34 PM

Carb and linkages are sold.

68chevyfuelie · 03-10-2011, 02:32 PM

Got the parts today, thanks! Great to deal with!!

02-20-2011, 11:10 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	1967 truck remains. Slim pickins.... Getting close to crusher time and thought i would check in with what is left. If you see something, ask and i will price it. Inside heater box, $40 Wiper motor, $25 Throttle linkage and pedal rod, $20 2 bbl carb, $20 (7024106) 67 ram assist steering with pump, $150 All are plus shipping or local pickup. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-20-2011, 11:58 PM	#2
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: 1967 truck remains. Slim pickins.... Is the carb a Rochester?

02-21-2011, 12:47 AM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: 1967 truck remains. Slim pickins.... I will check tomorrow, but i believe it is a 2jet. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-21-2011, 01:09 AM	#4
67-1sttimer Registered User Join Date: Apr 2010 Location: Dallas Tx Posts: 232	Re: 1967 truck remains. Slim pickins.... Is the rubber floor mat worth cleaning and re-using? Price with shipping. 75150 TX Chris.

02-21-2011, 01:19 AM	#6
67-1sttimer Registered User Join Date: Apr 2010 Location: Dallas Tx Posts: 232	Re: 1967 truck remains. Slim pickins.... If it would work well under a carpet i might be able to use it.

02-21-2011, 02:40 AM	#7
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 1967 truck remains. Slim pickins.... driver side fender gone? any good? either? thanx rich

02-21-2011, 09:58 AM	#9
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: 1967 truck remains. Slim pickins.... Eric, I need the clips that hold the tail light and back up lights in, they are U shaped and they slide over the sheet metal.

02-21-2011, 02:37 PM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: 1967 truck remains. Slim pickins.... 67-1sttimer there is a tear on the drivers side. $20 plus shipping. Rich 67, the roof is the only good panel... Classic67chevy, you are second in line on the mat. Rob, sorry, no box on this truck. 68chevyfuelie, i added a pic for you. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-21-2011, 02:50 PM	#11
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: 1967 truck remains. Slim pickins.... Can you include throttle linkage/springs/clips etc.? This will be for a project down the road, all the little bits are nice to have. Does the carb butterfly still open, or is it seized? Thanks.

02-21-2011, 04:07 PM	#12
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: 1967 truck remains. Slim pickins.... windshild stainless??

02-21-2011, 06:14 PM	#14
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: 1967 truck remains. Slim pickins.... The throttle pedal and rod from the pedal to the cab - does this include the hardware to connect it to the carb. If so price shipped to 16635. Thanks Jason

02-21-2011, 08:09 PM	#16
67-1sttimer Registered User Join Date: Apr 2010 Location: Dallas Tx Posts: 232	Re: 1967 truck remains. Slim pickins.... Will you take $25 shipped on that floor mat? Thanks Chris.

02-22-2011, 02:18 PM	#18
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: 1967 truck remains. Slim pickins.... Pic for 68chevyfuelie. $35 plus shipping for all pictured. All the plates move fine. Let me know. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-22-2011, 02:44 PM	#19
67-1sttimer Registered User Join Date: Apr 2010 Location: Dallas Tx Posts: 232	Re: 1967 truck remains. Slim pickins.... Ok thanks, ill pass it to the nxt guy interested. Chris.

02-22-2011, 05:06 PM	#20
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 1967 truck remains. Slim pickins.... How is the cab floor?( The areas around where the outer seat belts bolt down.) All the way to the corners



Register or Log In To remove these advertisements.

02-22-2011, 10:43 PM	#21
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: 1967 truck remains. Slim pickins.... Classic1967, you are up on the mat... Projectjimmie. Rusty... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-24-2011, 02:34 PM	#22
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: 1967 truck remains. Slim pickins.... Carb and linkages are sold. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-10-2011, 02:32 PM	#23
68chevyfuelie Registered User Join Date: Mar 2008 Location: Kitchener, Ontario Posts: 487	Re: 1967 truck remains. Slim pickins.... Got the parts today, thanks! Great to deal with!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.