my 80 build - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flamingbig10 · 02-23-2011, 12:50 AM

dirty dingo's
http://cgi.ebay.com/ebaymotors/LS-Ad...Q5fAccessories

Driveway Dreams · 02-23-2011, 01:24 AM

Aaron, been a while again since I checked in. Progress is coming along nice. Keep at it. Gonna be well worth the time & effort when you are done.

flamingbig10 · 02-23-2011, 08:55 PM

thanks Gerald, I plan on ordering the engine harness this week

flamingbig10 · 02-24-2011, 02:01 AM

I ordered the an fittings for the transmission cooler line and started painting the gas tank silver, I may get a indicator panel like one of these
http://www.newvintageusa.com/panels.html

flamingbig10 · 02-25-2011, 12:23 AM

I got the steering column pulled apart and primed

flamingbig10 · 02-27-2011, 01:52 AM

I finally had time to turn the brake rotors today those suckers were warped and painted the non machined area black and got the front end back on the ground, painted the gas tank silver and installed it, got the column painted black, and pulled the core support off my truck and mounted to the frame but I'll still need to weld up all the factory holes up top and paint it gloss black

85/05Silverado · 02-27-2011, 02:07 AM

hey man, build thread is awesome your doing some good work, i like your truck i seen it on cardomain last year or the year before, keep up the good work

flamingbig10 · 02-27-2011, 02:51 AM

thanks Stephen

flamingbig10 · 02-27-2011, 02:57 AM

here are a few parts I may get
http://www.summitracing.com/parts/SUM-G4850/
http://www.summitracing.com/parts/DER-13304/
http://www.summitracing.com/parts/SPE-9900/

JohnC · 02-27-2011, 02:38 PM

Coming along nicely man!

73gmc454 · 02-27-2011, 08:59 PM

Good looking truck will look and run even better with the updates ,

flamingbig10 · 02-28-2011, 12:09 AM

thanks guys

*nbpro* · 03-03-2011, 03:00 AM

Quote:

Originally Posted by flamingbig10

I ordered the an fittings for the transmission cooler line and started painting the gas tank silver, I may get a indicator panel like one of these
http://www.newvintageusa.com/panels.html

you get the indicator panel ?

flamingbig10 · 03-03-2011, 08:50 PM

when I'm to the point to wire the truck I'll get it

flamingbig10 · 03-06-2011, 01:23 PM

got a little done
went from this

to this

flamingbig10 · 03-07-2011, 01:06 AM

my dad got the driver side floor pan and inner kick panel welded in just have to replace the rusty spots on floor hump, add new channel for the weather stripping finish up the welding and the driver side will be done on the inside. I ordered the larger floor pan for passenger side since the rust is higher then the panel covers

flamingbig10 · 03-07-2011, 11:55 PM

hooker super comp 64-72 chevelle headers

3r!c84 · 03-08-2011, 12:28 AM

great fit! what about a collector?

flamingbig10 · 03-12-2011, 11:36 AM

the collectors are there

bbbc10 · 03-12-2011, 04:35 PM

nice!!

flamingbig10 · 03-12-2011, 11:44 PM

thanks I got the passenger side floor pan mostly welded in today

softballnrd27 · 03-13-2011, 01:53 AM

How much if any do they hang below the frame?

flamingbig10 · 03-14-2011, 12:19 AM

there about flush with the bottom of the frame
few pics of the floors

silvereagle07 · 03-14-2011, 05:19 PM

The floor turned out nice. The headers look good too. Nice job.

lapaipaxxx · 03-16-2011, 03:11 PM

What's the part# on those headers
Thanks
Posted via Mobile Device

02-23-2011, 12:50 AM	#651
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build dirty dingo's http://cgi.ebay.com/ebaymotors/LS-Ad...Q5fAccessories __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

02-23-2011, 01:24 AM	#652
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: my 80 build Aaron, been a while again since I checked in. Progress is coming along nice. Keep at it. Gonna be well worth the time & effort when you are done. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

02-23-2011, 08:55 PM	#653
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build thanks Gerald, I plan on ordering the engine harness this week __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

02-24-2011, 02:01 AM	#654
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build I ordered the an fittings for the transmission cooler line and started painting the gas tank silver, I may get a indicator panel like one of these http://www.newvintageusa.com/panels.html __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 02-24-2011 at 02:02 AM.

02-25-2011, 12:23 AM	#655
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build I got the steering column pulled apart and primed __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

02-27-2011, 01:52 AM	#656
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build I finally had time to turn the brake rotors today those suckers were warped and painted the non machined area black and got the front end back on the ground, painted the gas tank silver and installed it, got the column painted black, and pulled the core support off my truck and mounted to the frame but I'll still need to weld up all the factory holes up top and paint it gloss black __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 02-27-2011 at 03:36 AM.

02-27-2011, 02:07 AM	#657
85/05Silverado Registered User Join Date: Jan 2011 Location: Brooks, Alberta Canada Posts: 103	Re: my 80 build hey man, build thread is awesome your doing some good work, i like your truck i seen it on cardomain last year or the year before, keep up the good work __________________ Hows it goin Eh! 1985 Chevrolet C10 Silverado SWB-395 Stroker 490hp,700R4 12 bolt 3:73 posi,inferno red crystal pearl coat with black ralleystripes,custom leather seats, carbon fiber gauges 2005 silverado 1500 ecsb, Z71, 33x12.5 dick cepek http://www.cardomain.com/id/Kearney Stephen

02-27-2011, 02:51 AM	#658
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build thanks Stephen __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

02-27-2011, 02:57 AM	#659
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build here are a few parts I may get http://www.summitracing.com/parts/SUM-G4850/ http://www.summitracing.com/parts/DER-13304/ http://www.summitracing.com/parts/SPE-9900/ __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

02-27-2011, 02:38 PM	#660
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: my 80 build Coming along nicely man!

02-27-2011, 08:59 PM	#661
73gmc454 Registered User Join Date: Dec 2010 Location: louisville ohio Posts: 375	Re: my 80 build Good looking truck will look and run even better with the updates , __________________ my build 77 gmc shortbed big block, http://67-72chevytrucks.com/vboard/s...d.php?t=438237

02-28-2011, 12:09 AM	#662
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build thanks guys __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-03-2011, 08:50 PM	#664
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build when I'm to the point to wire the truck I'll get it __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-06-2011, 01:23 PM	#665
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build got a little done went from this to this __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 03-06-2011 at 01:25 PM.

03-07-2011, 01:06 AM	#666
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build my dad got the driver side floor pan and inner kick panel welded in just have to replace the rusty spots on floor hump, add new channel for the weather stripping finish up the welding and the driver side will be done on the inside. I ordered the larger floor pan for passenger side since the rust is higher then the panel covers __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 03-07-2011 at 01:12 AM.



Register or Log In To remove these advertisements.

03-07-2011, 11:55 PM	#667
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build hooker super comp 64-72 chevelle headers __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-08-2011, 12:28 AM	#668
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: my 80 build great fit! what about a collector? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

03-12-2011, 11:36 AM	#669
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build the collectors are there __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-12-2011, 04:35 PM	#670
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: my 80 build nice!!

03-12-2011, 11:44 PM	#671
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build thanks I got the passenger side floor pan mostly welded in today __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-13-2011, 01:53 AM	#672
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: my 80 build How much if any do they hang below the frame? __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

03-14-2011, 12:19 AM	#673
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: my 80 build there about flush with the bottom of the frame few pics of the floors __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 03-14-2011 at 12:20 AM.

03-14-2011, 05:19 PM	#674
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: my 80 build The floor turned out nice. The headers look good too. Nice job. __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

03-16-2011, 03:11 PM	#675
lapaipaxxx Registered User Join Date: May 2010 Location: brownsville,tx Posts: 26	Re: my 80 build What's the part# on those headers Thanks Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.