Newbee with a P/S Frame TROUBLE - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddnutz · 03-16-2011, 04:44 PM

mine is 4x4 never checked it may have to now for sure

TheWhiteElephant · 03-16-2011, 10:36 PM

Yeah, it's always good to read an update.

mtchevytruck · 03-18-2011, 05:43 PM

Sorry. Didn't think of pics before or during project. Orig. looked a lot like 87 Chevy Silverado's with the addition of large mangled washers gobbed in by ugly welds.

Black pic is of dented torn removed inner fender well from damage done before first repair attempt.

Cut bottom patch to size and bend and form to fit in steps. Must use same patch for both 4x4 and 2x4.

Side patch had one hole to drill for brake line bracket and notch frt. of bracket for frt. bumper brace. Bend and form in steps to fit.

Brace we had to cut and weld at two slight angles to fit without putting major bind on box mounting tabs.

Of course you need to either pull and straighten steering wheel or have truck realigned after job because steering wheel is at about 11 o'clock when finished due to the additional thickness of the patch. Which I didn't do yet or add in to the total $ figures on earlier post.

mtchevytruck · 03-18-2011, 05:44 PM

Couple other pics. Hope they help.

03-16-2011, 04:44 PM	#26
muddnutz Registered User Join Date: Mar 2011 Location: Canton/Holly Springs Ga Posts: 89	Re: Newbee with a P/S Frame TROUBLE mine is 4x4 never checked it may have to now for sure __________________ 1986 K-10 "ole blue"

03-16-2011, 10:36 PM	#27
TheWhiteElephant God is good! Join Date: Sep 2010 Location: Texas Posts: 689	Re: Newbee with a P/S Frame TROUBLE Yeah, it's always good to read an update. __________________ Mando *"It takes a smart man to know when he's stupid." -- Barney Rubble* My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=430367

03-18-2011, 05:43 PM	#28
mtchevytruck Registered User Join Date: Dec 2010 Location: Columbia Falls, MT Posts: 45	Re: Newbee with a P/S Frame TROUBLE Sorry. Didn't think of pics before or during project. Orig. looked a lot like 87 Chevy Silverado's with the addition of large mangled washers gobbed in by ugly welds. Black pic is of dented torn removed inner fender well from damage done before first repair attempt. Cut bottom patch to size and bend and form to fit in steps. Must use same patch for both 4x4 and 2x4. Side patch had one hole to drill for brake line bracket and notch frt. of bracket for frt. bumper brace. Bend and form in steps to fit. Brace we had to cut and weld at two slight angles to fit without putting major bind on box mounting tabs. Of course you need to either pull and straighten steering wheel or have truck realigned after job because steering wheel is at about 11 o'clock when finished due to the additional thickness of the patch. Which I didn't do yet or add in to the total $ figures on earlier post. Attached Images __________________ NW Montana 1977 C10 Bonanza short bed, 2wd 350/350, lowered 2", 10" Rally Wheels Lots more needed. 1977 C10 Long bed, 2wd, less engine Parst truck.

03-18-2011, 05:44 PM	#29
mtchevytruck Registered User Join Date: Dec 2010 Location: Columbia Falls, MT Posts: 45	Re: Newbee with a P/S Frame TROUBLE Couple other pics. Hope they help. Attached Images __________________ NW Montana 1977 C10 Bonanza short bed, 2wd 350/350, lowered 2", 10" Rally Wheels Lots more needed. 1977 C10 Long bed, 2wd, less engine Parst truck. Last edited by mtchevytruck; 03-18-2011 at 05:46 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.