LS swap fuel system setup

[1966Stepside]

In the next week or so, i'm going to begin swapping a 4.8/4l60e into my '66 Stepside. I'd like to hear from folks who have done one of these lsx swaps and moved their fuel tank to the bed. I've done quite a bit of reading on the subject, but there are a couple parts I'm not clear on.

I don't mind having the fuel pump external to the tank, but what I dont' want is to have to have a fuel filler door in the middle of the nice wooden bed I plan to eventually install. Are there any aftermarket tanks that have a side fuel filler neck, or that leave enough room between the tank and the bed to put a 90 degree bend at the neck and run the filler from the rear fender area? I've also read that the tank needs to be baffled internally, but is that for internal fuel pumps only?

I'd love to see pics if you've got em!

Photobucket is messing with me, but here's a couple of shots of my truck when I brought it home.




Thanks!

[rbar]

You might consider one of those set ups where the fuel filler is below the wood and one board hinges up to allow access.
Posted via Mobile Device

[TR65]

66,

Here is how I did mine.

http://67-72chevytrucks.com/vboard/s...d.php?t=334077


TR

[1966Stepside]

Originally Posted by TR65

66,

Here is how I did mine.

http://67-72chevytrucks.com/vboard/s...d.php?t=334077


TR

I like what you did there. I was browsing summit for the RCI tank you used, but I don't see one with that filler snout coming out at a 90 degree angle like that. Is that something you fabbed up yourself?

[TR65]

66,

Thanks. This is it.


http://www.summitracing.com/parts/RC...5&autoview=sku

TR

[1966Stepside]

TR65,

I was really looking for the fuel cell you were using. Was that a summit part also, or did that come from somewhere else?

[Captainfab]

Another option is a fuel tank made specifically to your needs. Check out this vendor's thread....

http://67-72chevytrucks.com/vboard/s...d.php?t=362307

and this vendor also....

http://67-72chevytrucks.com/vboard/s...d.php?t=446688

[jays68yak]

Ive used close to 10 of the ricks tanks. While pricey I really like them.
http://rickstanks.com/truck.htm

[1966Stepside]

Originally Posted by Captainfab

Another option is a fuel tank made specifically to your needs. Check out this vendor's thread....

http://www.67-72chevytrucks.com/vboa...d.php?t=362307

and this vendor also....

http://www.67-72chevytrucks.com/vboa...d.php?t=446688

Dang, wish i had gotten in on fuelcellguys valentines special. That sounds about perfect.

I'll do some more digging tonight, probably be ordering in the next day or two
Posted via Mobile Device

[TR65]

Originally Posted by 1966Stepside

TR65,

I was really looking for the fuel cell you were using. Was that a summit part also, or did that come from somewhere else?

66,

I used a Rick's tank like jays68yak.

They are very nice. They even put in two sending units for me, one for the computer and one for the old gas gage. The in tank pump is nicely baffled and uses a standard AC delco pump.

TR

[1966Stepside]

Originally Posted by TR65

66,

I used a Rick's tank like jays68yak.

They are very nice. They even put in two sending units for me, one for the computer and one for the old gas gage. The in tank pump is nicely baffled and uses a standard AC delco pump.

TR

Ah, another recommendation for Rick's. They definitely look like quality pieces, I'm just not sure they're in my budget. The tanks I saw priced through resellers cost almost as much as my engine/tranny combo! Not saying they're not worth it, just out of my reach for now with all the other money I'm spending on the swap. Of course, it may not be feasible to get a bargain basement price on a tank/sending unit/ pump. I'll do some more looking.... I'd really like to get one of those. They fit so well!

On another note, if the fuel pump is external to the tank, does the tank still need to be baffled? I was looking at a build thread today about using a '69 Camaro tank and a flip down license holder. That looked really neat, and I like the 'stealth' sorta idea behind it. I'd love to use that, but I'm sure those aren't baffled at all.

Edit: D'oh! After looking through your build thread again, TR, I see where you said it was a Rick's tank. I fail at reading.

[1966Stepside]

Anyone got info on non baffled tanks and external electric pumps? Hoping for some good info so i dont waste money on the wrong tank
Posted via Mobile Device

[BR3W CITY]

I don't think it has to be baffled but it would need to be sumped (pickup at point lowest to tank) so there is a constant supply of fuel to the pickup.

[1966Stepside]

Originally Posted by BR3W CITY

I don't think it has to be baffled but it would need to be sumped (pickup at point lowest to tank) so there is a constant supply of fuel to the pickup.

Sweet... Thats what i figured, nice to have confirmation
Posted via Mobile Device

[Clyde65]

I have one of the "fuel Cells" that summit sells, 16gal, it pulls from the lowest point in the front, has no baffles and I havent had any issues so far with fuel starvation.

[BR3W CITY]

I also run the "fuel foam" in my tank to help with any sloshing that might occur. Works pretty well and its cheap.

[1966Stepside]

Thanks for the help everyone! Since i had unused gift cards to lmc, i ordered their under bed kit. I'll post pics when i get it installed.
Posted via Mobile Device