Chevy tough! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hoods69BadBowTie · 04-21-2011, 03:23 PM

HAHA wow thats a classic who does that! Musta needed beer money and gas money for that poor truck.

Slow Build · 04-21-2011, 03:29 PM

I think it's just a case of taking the designated driver thing a bit too far.

GmtGmt · 04-21-2011, 06:06 PM

i would have payed to see that happen here, just to see the officers face

Benelli · 04-21-2011, 07:38 PM

Had a 1996 Flat bed F250, we did that with a 1980-something Datsun. We only moved it from the pasture (Used a loader to put it on) to the house lol.

It didn't fall off or anything but I kept more time looking at the rear-view than I did going forward lol

67ChevyRedneck · 04-21-2011, 08:32 PM

Quote:

Originally Posted by no moa

Chevy did a commercial years ago with a full size ford across the bed, i have no doubt in my mind they tossed it up here with a loader and strapped the front down.

I remember seeing them, even found them on youtube before, but this is the best I could find. Starts off with a ford commercial, but keep watching.

YouTube - 1987 Ford F250 vs 1987 Chevrolet...

no moa · 04-21-2011, 08:44 PM

Quote:

Originally Posted by 67ChevyRedneck

I remember seeing them, even found them on youtube before, but this is the best I could find. Starts off with a ford commercial, but keep watching.

YouTube - 1987 Ford F250 vs 1987 Chevrolet CK Commercial

AHAHAHAHAHAHAH i hadn't seen that one!!

Restrorob · 04-21-2011, 10:10 PM

Quote:

Originally Posted by oem4me

Hilarious! Actually, if you've got absolutely nothing to do and want to have some free weekend fun, fill a cooler, go down to the nearest Home Depot parking lot, and just sit and watch the retards of the world load

Like this ?

If I remember there were 6 bags of ready mix in the rear floorboard, Where it sits the rear struts were pushed right through the wheel wells into the trunk....

treveiger · 04-21-2011, 11:01 PM

Saving this to show my family

, awesome video!!!

**special-K** · 04-22-2011, 07:59 AM

You guys are all way off. It's obvious to me the guy just got caught trying to steal that car.

**chevy_man5** · 04-22-2011, 08:50 AM

Well in that case, he must have been hard up to steal a F@%d Taurus.

awbrown · 04-22-2011, 12:39 PM

What part of Maine are you from Moa???

QUOTE=no moa;4637515]I bet its real, all the weight is in the front of the car. And i'm sure the trunk is empty and the interior is gone.
Look at the dent in the bed from the front tire.
Chevy did a commercial years ago with a full size ford across the bed, i have no doubt in my mind they tossed it up here with a loader and strapped the front down.[/QUOTE]

cam.man67 · 04-22-2011, 01:11 PM

What a great thread! I needed a laugh.

oem4me · 04-22-2011, 03:13 PM

Quote:

Originally Posted by Restrorob

Like this ?

If I remember there were 6 bags of ready mix in the rear floorboard, Where it sits the rear struts were pushed right through the wheel wells into the trunk....

Yep, but that's pretty extreme. I don't know if it's funny or just plain sad.

Here is one that's a little closer to home. I found it here on another thread.

TheManInBlack · 04-22-2011, 03:37 PM

Quote:

Originally Posted by lakeroadster

Cool...

Random thought:

That Chevy is sitting pretty level for such a heavy poor positioned load. To level I say, I call shennanigans.

Questions:

How did they load it?
How would they unload it?
Is it Photoshopped? Look at the truck tires in the second picture.

You know, the Ford guys would say he needs that Taurus in the back for when the Chevy breaks down......

Bumpstops.

I once had 2000lbs of block in my lowered '64 and you could hardly tell.

CE20934 · 04-23-2011, 05:35 PM

Quote:

Originally Posted by awbrown

It looks like a michigan plate on the truck , and the dot truck looks like a Michigan unit .........I am so ashamed ....

Not quite. New York plates & New York State Police.

FRENCHBLUE72 · 04-23-2011, 08:03 PM

Looks real to me.... Very scary but at least its strapped down better than some of the stuff I see around here..

espyJen · 04-25-2011, 04:44 PM

Id like to know what happened from there? How did they unload that on the side of the road--don't think they could tow it off like that...

daxloves · 09-09-2012, 04:00 PM

Sorry to awake the dead but the other day I hauled a load of scrap to the local scrapper and while I was there a beat up ford bronco pulled in with the back off and a upside down car in the "bed" dragging the ground.
I immediately had a flashback to this post.
When the scrapper pulled it out and flipped it over with the fork lift you could see it had been dragging on the highway so much the carb was half gone at an angle.

04-21-2011, 03:23 PM	#26
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Chevy tough! HAHA wow thats a classic who does that! Musta needed beer money and gas money for that poor truck. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

04-21-2011, 03:29 PM	#27
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: Chevy tough! I think it's just a case of taking the designated driver thing a bit too far. __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

04-21-2011, 07:38 PM	#29
Benelli Watchin the rust grow Join Date: Oct 2008 Location: Western Nebraska Posts: 950	Re: Chevy tough! Had a 1996 Flat bed F250, we did that with a 1980-something Datsun. We only moved it from the pasture (Used a loader to put it on) to the house lol. It didn't fall off or anything but I kept more time looking at the rear-view than I did going forward lol __________________ 1979 Chevy K10 (H/D Front end) - 350 w/ Holley Truck Avenger, Weinald Intake manifold, headers, bored .060 over, mild cam, Built up TH350 (TranStar Shift kit) with a part-timed NP203 t-case SOLD ($3,000) 1997 Chevy Silverado 1500 - 4.3 vortec, extended cab, 21 highway MPG, stock. "Red" SOLD ($3,000) 1987 Toyota 4wd Pick-up - work in progress, future DD SOLD ($1,850) 1998 Dodge Ram 2500 Cummins 5spd Quad cab - old 12 valve with some work done 2004 Chevy Silverado - Black, 4x4, 5.3L, stock for now Underneath that rust is a heart of gold

04-21-2011, 11:01 PM	#33
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: Chevy tough! Saving this to show my family , awesome video!!! __________________ 1969 Chevy c20(Miss Hackjob)

04-22-2011, 07:59 AM	#34
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Chevy tough! You guys are all way off. It's obvious to me the guy just got caught trying to steal that car. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-22-2011, 08:50 AM	#35
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Chevy tough! Well in that case, he must have been hard up to steal a F@%d Taurus. __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread Last edited by chevy_man5; 04-22-2011 at 08:50 AM.

04-22-2011, 12:39 PM	#36
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: Chevy tough! What part of Maine are you from Moa??? QUOTE=no moa;4637515]I bet its real, all the weight is in the front of the car. And i'm sure the trunk is empty and the interior is gone. Look at the dent in the bed from the front tire. Chevy did a commercial years ago with a full size ford across the bed, i have no doubt in my mind they tossed it up here with a loader and strapped the front down.[/QUOTE]

04-22-2011, 01:11 PM	#37
cam.man67 Registered User Join Date: Jun 2010 Location: Jefferson, MD Posts: 2,397	Re: Chevy tough! What a great thread! I needed a laugh. __________________ '68 Dodge Dart 270, 225, 904, 2.76--"Lucy" 1996 Gmc 1500 Z71, 350, 4l60e, 3.73s 1995 Jeep Wrangler Rio Grande 2.5, AX5, 4.10s 1989 Toyota Pickup 22re, auto, 3.73 Last edited by cam.man67; 04-22-2011 at 01:11 PM.

04-23-2011, 08:03 PM	#41
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Chevy tough! Looks real to me.... Very scary but at least its strapped down better than some of the stuff I see around here.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-25-2011, 04:44 PM	#42
espyJen Registered User Join Date: Sep 2006 Location: new england Posts: 14	Re: Chevy tough! Id like to know what happened from there? How did they unload that on the side of the road--don't think they could tow it off like that...

09-09-2012, 04:00 PM	#43
daxloves Registered User Join Date: Mar 2010 Location: Kettle Falls WA Posts: 48	Re: Chevy tough! Sorry to awake the dead but the other day I hauled a load of scrap to the local scrapper and while I was there a beat up ford bronco pulled in with the back off and a upside down car in the "bed" dragging the ground. I immediately had a flashback to this post. When the scrapper pulled it out and flipped it over with the fork lift you could see it had been dragging on the highway so much the carb was half gone at an angle.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.