Wheel wells for 67-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hill's Rod & Custom · 05-17-2011, 10:46 PM

Check out these wheel wells for a slammed 67-72. They are in the process of being made from fiberglass and the first ones will be ready for sale in a month. Both front and rear wheel wells look like a factory GM set, but raised enough to make a low stance. The blazer below is at ride height and has lots of suspension travel! I have been surfing this site for years and enjoy the information and vendors I have found. When these become available I'm going to become a vender on this site. I welcome any feed back you might have.

YBNORML · 05-18-2011, 12:29 AM

I want a set of those front ones! Please keep us informed as to your progress

Posted via Mobile Device

54Caddy · 05-18-2011, 01:19 AM

any future plans for the 73-87 chevy trucks??

andrewmp6 · 05-18-2011, 08:24 AM

I'm happy to see you guys on here all of your trucks are amazing.67-72 and 73-87 parts will sell easy on here good luck hope to see parts from you.

texastrendz · 05-18-2011, 09:15 AM

can you the stock hood hinge with the front inners?

gringoloco · 05-18-2011, 12:27 PM

Quote:

Originally Posted by texastrendz

can you the stock hood hinge with the front inners?

My first instinct is 'no'. There's maybe an inch clearance with stock tubs, looks like these are more than that.

Man, when it rains, it pours. These will be cool. Should be able to build a completely bolt-on, frame-laying show truck soon...
Posted via Mobile Device

gringoloco · 05-18-2011, 12:32 PM

This is the truck with the 'touring' dropmember, correct? So, these will clear the upper a-arms and steering shaft? If so, cool

Posted via Mobile Device

Hill's Rod & Custom · 05-18-2011, 01:00 PM

these wheel wells will not work with stock hood hinges. I am using the hinges in the cowl from porterbuilt street rods. I set the front up with the drop member from them to. The wheel wells cover the upper control arms and mounts for a clean look.
Posted via Mobile Device

belowme51 · 05-18-2011, 01:09 PM

awesome!!! how much are the fronts gonna be? also whats the biggest diameter tire you can use to still lay frame? Thanks

YBNORML · 05-18-2011, 06:53 PM

Quote:

Originally Posted by belowme51

awesome!!! how much are the fronts gonna be? also whats the biggest diameter tire you can use to still lay frame? Thanks

X2
Posted via Mobile Device

texastrendz · 05-18-2011, 07:41 PM

Quote:

Originally Posted by gringoloco

My first instinct is 'no'. There's maybe an inch clearance with stock tubs, looks like these are more than that.

Man, when it rains, it pours. These will be cool. Should be able to build a completely bolt-on, frame-laying show truck soon...
Posted via Mobile Device

it was worth a shot!!! j/k

Rochlow · 05-18-2011, 09:15 PM

interested??? Prices?

*Shane* · 05-18-2011, 09:54 PM

wasn't a member working on this exact thing just a few weeks ago? is this a joint deal or something brand new?

**kev2809** · 05-18-2011, 09:58 PM

67cheby?

i think he made a set too, not sure if its this same one though...they sure do look cool though

fastbagged68 · 05-18-2011, 11:05 PM

Hey guys I have seen these wheel wells in person, these pictures do them no justice. They look like they are factory wheel wells but will allow you to lay out. Also that blazer in the above pic is at ride height.
Posted via Mobile Device

**67cheby** · 05-18-2011, 11:29 PM

no this is not a group effort, not the same as mine

Rochlow · 05-19-2011, 08:32 AM

What on the firewall and fenders needs to be modified to make these fit?

SBTork · 05-19-2011, 10:59 AM

Quote:

Originally Posted by 54Caddy

any future plans for the 73-87 chevy trucks??

^^ also interested in this

Hill's Rod & Custom · 05-19-2011, 10:23 PM

The firewall does not need any modification,they bolt in to the stock mount on the firewall. The fenders need to be trimmed to the new wheel well opening, and the outside flange needs to be rolled up for more tire clearance. I made a sheet metal piece to fit the top of the wheel wells that is welded to the fender and has additional bolts to help secure the top of the well, like the stock ones. The two bolts are screwed from the bottom and are not seen from the engine bay. More pictures will follow to help show what I'm talking about.

*Shane* · 05-19-2011, 10:42 PM

how much?

Hill's Rod & Custom · 05-19-2011, 11:05 PM

The front pair are going to run 750 and the rear will run 650. I'm going to sell front and rear with a discounted package deal. Also thinking of a group rate with discounts as well. I'm going to wait to take orders till the fiberglass ones are in my hand.

K5 Blazer · 05-19-2011, 11:55 PM

I seen these in person. They look so true to the originals - as if laying frame was an option . . . . Just ordered mine (2 sets). Cant wait!!

YBNORML · 07-15-2011, 08:42 PM

Any new info?
Posted via Mobile Device

m6z · 07-15-2011, 10:47 PM

Quote:

Originally Posted by K5 Blazer

I seen these in person. They look so true to the originals - as if laying frame was an option . . . . Just ordered mine (2 sets). Cant wait!!

are they available now? any more detailed pics?

smbrouss70 · 08-26-2011, 01:54 PM

Anything new on these?

05-17-2011, 10:46 PM	#1
Hill's Rod & Custom Registered User Join Date: May 2011 Location: California Posts: 55	Wheel wells for 67-72 Check out these wheel wells for a slammed 67-72. They are in the process of being made from fiberglass and the first ones will be ready for sale in a month. Both front and rear wheel wells look like a factory GM set, but raised enough to make a low stance. The blazer below is at ride height and has lots of suspension travel! I have been surfing this site for years and enjoy the information and vendors I have found. When these become available I'm going to become a vender on this site. I welcome any feed back you might have. Attached Images Last edited by Hill's Rod & Custom; 05-18-2011 at 12:04 AM. Reason: more pictures

05-18-2011, 12:29 AM	#2
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: Wheel wells for 67-72 I want a set of those front ones! Please keep us informed as to your progress Posted via Mobile Device __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

05-18-2011, 01:19 AM	#3
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Wheel wells for 67-72 any future plans for the 73-87 chevy trucks?? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

05-18-2011, 08:24 AM	#4
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Wheel wells for 67-72 I'm happy to see you guys on here all of your trucks are amazing.67-72 and 73-87 parts will sell easy on here good luck hope to see parts from you.

05-18-2011, 09:15 AM	#5
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: Wheel wells for 67-72 can you the stock hood hinge with the front inners?

05-18-2011, 12:32 PM	#7
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Wheel wells for 67-72 This is the truck with the 'touring' dropmember, correct? So, these will clear the upper a-arms and steering shaft? If so, cool Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-18-2011, 01:00 PM	#8
Hill's Rod & Custom Registered User Join Date: May 2011 Location: California Posts: 55	Re: Wheel wells for 67-72 these wheel wells will not work with stock hood hinges. I am using the hinges in the cowl from porterbuilt street rods. I set the front up with the drop member from them to. The wheel wells cover the upper control arms and mounts for a clean look. Posted via Mobile Device

05-18-2011, 01:09 PM	#9
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: Wheel wells for 67-72 awesome!!! how much are the fronts gonna be? also whats the biggest diameter tire you can use to still lay frame? Thanks

05-18-2011, 09:15 PM	#12
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Wheel wells for 67-72 interested??? Prices?

05-18-2011, 09:54 PM	#13
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Wheel wells for 67-72 wasn't a member working on this exact thing just a few weeks ago? is this a joint deal or something brand new?

05-18-2011, 09:58 PM	#14
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Wheel wells for 67-72 67cheby? i think he made a set too, not sure if its this same one though...they sure do look cool though __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-18-2011, 11:05 PM	#15
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Re: Wheel wells for 67-72 Hey guys I have seen these wheel wells in person, these pictures do them no justice. They look like they are factory wheel wells but will allow you to lay out. Also that blazer in the above pic is at ride height. Posted via Mobile Device

05-18-2011, 11:29 PM	#16
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Wheel wells for 67-72 no this is not a group effort, not the same as mine __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-19-2011, 08:32 AM	#17
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Wheel wells for 67-72 What on the firewall and fenders needs to be modified to make these fit?

05-19-2011, 10:23 PM	#19
Hill's Rod & Custom Registered User Join Date: May 2011 Location: California Posts: 55	Re: Wheel wells for 67-72 The firewall does not need any modification,they bolt in to the stock mount on the firewall. The fenders need to be trimmed to the new wheel well opening, and the outside flange needs to be rolled up for more tire clearance. I made a sheet metal piece to fit the top of the wheel wells that is welded to the fender and has additional bolts to help secure the top of the well, like the stock ones. The two bolts are screwed from the bottom and are not seen from the engine bay. More pictures will follow to help show what I'm talking about.



Register or Log In To remove these advertisements.

05-19-2011, 10:42 PM	#20
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Wheel wells for 67-72 how much?

05-19-2011, 11:05 PM	#21
Hill's Rod & Custom Registered User Join Date: May 2011 Location: California Posts: 55	Re: Wheel wells for 67-72 The front pair are going to run 750 and the rear will run 650. I'm going to sell front and rear with a discounted package deal. Also thinking of a group rate with discounts as well. I'm going to wait to take orders till the fiberglass ones are in my hand.

05-19-2011, 11:55 PM	#22
K5 Blazer Blazerologist Join Date: Feb 2001 Location: Brentwood, Ca. USA Posts: 154	Re: Wheel wells for 67-72 I seen these in person. They look so true to the originals - as if laying frame was an option . . . . Just ordered mine (2 sets). Cant wait!! __________________ www.californiak5.com Last edited by K5 Blazer; 05-20-2011 at 12:23 AM.

07-15-2011, 08:42 PM	#23
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: Wheel wells for 67-72 Any new info? Posted via Mobile Device __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

08-26-2011, 01:54 PM	#25
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: Wheel wells for 67-72 Anything new on these? __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.