|
07-27-2011, 02:27 PM
|
#1 |
|
Registered User
Join Date: Mar 2009
Location: bothell
Posts: 247
|
cab corners
i need to replace my cab corners and well as some of the cab floor on my 76 c10....has anyone ordered from LMC and done this repair? any advice? (can you write a little step by step if possible....)
Plus LMC sells inner cab corners, outer cab corners, and outer cab corner full? can anyone tell me what the differences are here? -JW
__________________
76 Chevy Fleetside 63 Lincoln Continental w/ Ford Racing 460 (550hp) 2012 VW GTI 2013 Escalade 2008 Harley |
|
|
|
07-27-2011, 03:28 PM
|
#2 |
|
Registered User
Join Date: Jan 2011
Location: San Bruno, CA.
Posts: 348
|
Re: cab corners
I recently ordered a rocker panel, full outer cab corner, and an inner cab corner. They are in pretty good condition. The difference between those three corners is that the INNER cab corner, is practically the inner portion that's under the truck/in your cab that you can't really see. The cab corner is just the corner, and the FULL or EXTENDED cab corner is the corner, plus some extra length, width, and height.
Posted via Mobile Device |
|
|
|
|
07-27-2011, 05:13 PM
|
#3 |
|
Registered User
Join Date: Mar 2009
Location: bothell
Posts: 247
|
Re: cab corners
ahah.....that helps. if you could grab some pics of your repair along the way? id love to see them and hear how it goes
__________________
76 Chevy Fleetside 63 Lincoln Continental w/ Ford Racing 460 (550hp) 2012 VW GTI 2013 Escalade 2008 Harley |
|
|
|
|
07-27-2011, 10:31 PM
|
#4 |
|
Registered User
Join Date: Mar 2008
Location: Lawndale, NC
Posts: 658
|
Re: cab corners
http://67-72chevytrucks.com/vboard/s...corners&page=5
Heres a post from Kieth Seymore in his re-build thread. It has some good step by steps, and some info on panel adhesive.
__________________
1978 Scottsdale - celebrating 10 years of teaching me profanity 1990 Silverado - bought in Nov. 2016 and it's already catching up - Sold 1987 k5 blazer - sold... :\ seed money for the 81 1981 k20 4x4 - 5.3 swap in progress Events attended: Spring GOG 2011 Dale JR car show Summer 2012 Gathering at Tommys pickup parts |
|
|
|
|
07-28-2011, 01:44 AM
|
#5 | |
|
Registered User
Join Date: Jan 2011
Location: San Bruno, CA.
Posts: 348
|
Re: cab corners
Quote:
Posted via Mobile Device |
|
|
|
|
|
07-28-2011, 12:56 PM
|
#6 |
|
Registered User
Join Date: Mar 2009
Location: bothell
Posts: 247
|
Re: cab corners
that link helped to see......i think i will weld vs adhesive though.
__________________
76 Chevy Fleetside 63 Lincoln Continental w/ Ford Racing 460 (550hp) 2012 VW GTI 2013 Escalade 2008 Harley |
|
|
|
|
07-28-2011, 01:05 PM
|
#7 |
|
Registered User
Join Date: Sep 2008
Location: Holt, Missouri
Posts: 94
|
Re: cab corners
I put LMC cab corners on my truck. Just outers, all of the inner sheet metal was good. I did not take pictures though. They worked out pretty well. The part inside the door is the hardest part to get right, took some metal shaping. the rear of the cab corner does not match the existing cab perfectly also. Other than that they worked out well. Was a lot easier that I thought it would be. I just butt welded mine, but you could roll a lip for a stronger weld.
|
|
|
|
|
07-28-2011, 07:36 PM
|
#8 |
|
Registered User
Join Date: Jan 2009
Location: Kansas city
Posts: 756
|
Re: cab corners
They are just as good of parts as any but be a pal and order from one of the fourm vendors that allow us keep us posting here.
__________________
***My 84 short bed build up***** http://67-72chevytrucks.com/vboard/s...68#post3481968 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
